Publications

Conferences

2019

Stahl, J.; Müller, D.; Pätzold, I.; Golle, R.; Tobie, T.; Volk, W.; Stahl, K.: The Infuence of Residual Stresses Induced by Near-Net-Shape Blanking Processes on the Fatigue Behavior under Bending Loads. IDDRG, 05.07.2019, DOI:10.1088/1757-899X/651/1/012086

Maaß, F.; Hahn, M.; Dobecki, M.; Poeche, A.; Reimers, W.; Tekkaya, A. E.: Influence of Tool Path Strategies on the Residual Stress Development in Single Point Incremental Forming. Proceedings of the 19th International Conference on Sheet Metal, SHEMET19, 15-17 April 2019, Leuven Belgium. DOI:10.1016/j.promfg.2019.02.105.

A. Franceschi, H. Hoche, M. Kaffenberger, M. Oechsner, P. Groche, Effects of a counter-punch system for cold full-forward extrusion, NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, Portsmouth, New Hampshire, USA, June 23-27

Maaß, F., Dobecki, M., Hahn, M., Reimers, W., Tekkaya, A. E., Setting Component Properties in Incremental Forming. Contributed Papers from Material Science and Technology 2019, MS&T19, Portland, USA,

Maaß, F., Hahn, M., Dobecki, M., Reimers, W., Tekkaya, A. E., Single Point Incremental Forming: Relation between Forming Mechanisms and Residual Stresses for Different Path Strategies and Geometries, 15th International Conference on Computational Plasticity, COMPLAS, 3.-5. September 2019, Barcelona, Spanien.

Uebing, S.; Scheunemann, L.; Brands, D.; Schröder, J. Numerical thermo-elasto-plastic analysis of residual stresses on different scales during cooling of hot forming parts. XV International Conference on Computational Plasticity. Fundamentals and Applications, COMPLAS 2019.

Behrens, B.-A.; Chugreev, A.; Kock, C. 2019. Macroscopic FE-Simulation of Residual Stresses in Thermo-Mechanically Processed Steels Considering Phase Transformation Effects. XV International Conference on Computational Plasticity. Fundamentals and Applications, COMPLAS 2019

Ishkina, S., Liu, Y., Herrmann, M. Schenck, C., Kuhfuss, B.: FEM Simulation of process fluctuations during rotary swaging of tubes,15th International Conference on Computational Plasticity, COMPLAS, 3.-5. September 2019, Barcelona, Spanien

D. Müller, T. Tobie and K. Stahl: Calculation of sub-surface-initiated fatigue fractures in gears. 15th International Conference on Computational Plasticity, COMPLAS, 3.-5. September 2019, Barcelona, Spanien

Seiler, M.: Phase-field modelling of fatigue crack initiation and propagation under residual stresses.15th International Conference on Computational Plasticity, COMPLAS, 3.-5. September 2019, Barcelona, Spanien

Landkammer P, Steinmann P: Plastic dislocation and incompatibility density as indicators for residual stresses. COMPLAS XV: Proceedings of the XV International Conference on Computational Plasticity: fundamentals and applications, pp. 201-210. CIMNE, 2019.

Maaß, F., Hahn, M., Dobecki, M., Reimers, W., Tekkaya, A. E., Improvement of Product Properties by Selective Induction of Residual Stresses in Single Point Incremental Forming, 12. Forming Technology Forum, 19./20. September 2019, Herrsching am Ammersee.

Dobecki, M., Maaß, F., Hahn, M.,  Reimers, W. und Tekkaya, A. E.: Einfluss umforminduzierter Eigenspannungen auf die Schwingfestigkeit inkrementell umgeformter Bauteile. Arbeitsgemeinschaft Wärmebehandlung + Werkstofftechnik e. V. - Fachausschuss Eigenspannungen, Herbstsitzung, 05-06. November 2019 (Präsentation)

Jobst A, Kiener C, Merklein M: Investigations on Residual Stress Generation in Extruded Steel Components. Proceedings of the 9th Congress of the German Academic Association for Production Technology, 2019, 83-92.

Uebing, S.; Brands, D.; Scheunemann, L.; Sarhil, M.; Niekamp, R.; Kock, C.; Chugreev, A.; Behrens, B.-A.; Schröder, J. Numerical analysis of residual stresses on microscale and mesoscale in hot bulk forming parts under specific cooling. 90th GAMM,  Proc. Appl. Math. Mech., 2019, 19: e201900017. doi:10.1002/pamm.201900017

Seiler, Martha; Linse, Thomas; Hantschke, Peter; Kästner, Markus: Efficient phase-field modelling of fatigue crack propagation. PAMM 19, 2019, Nr. 11/2019. doi:10.1002/pamm.201900229

Uebing, S.; Brands, D.; Scheunemann, L.; Sarhil, M.; Niekamp, R.; Schröder, J. Numerical analysis of microstructural residual stresses in hot bulk forming parts under specific cooling. 26. Conference on Computer Methods in Materials Technology, KomPlasTech 2019, 115-118.

Pavliuchenko, P., Bremen, T., Hirt, G.: Herstellung selbstentfaltender metallischer Hohlprofile, 33. ASK Umformtechnik Tagungsband, 2019.

Seiler, M.: Efficient phase-field modelling of fatigue in ductile materials. GACM, Kassel, 2019

2018

Volk, W.: Targeted Use of Forming Induced Residual Stresses in Metall Components. 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics GAMM, 2018 [mehr...]

Seiler, M.; Linse, T.; Hennig, P.; Kühne, D.;  Hantschke, P.; Kästner, M.: Phase-field modeling and simulation of fatigue crack propagation 5th GAMM Workshop on Phase-Field Modeling, Dresden, 08.02.2018

Kästner, M.; Seiler, M.: Influence of residual stresses on fatigue crack initiation and propagation – experiments and phase-field modeling. GAMM, München, 20.03.2018

Seiler, Martha; Hantschke, Peter; Brosius, Alexander; Kästner,Markus: A numerically efficient phase-field model for fatigue fracture – 1D analysis. GAMM 2018. doi:10.1002/pamm.201800207

Maqbool, Fawad; Bambach, Markus: Simulation of residual stresses and their impact on geometrical accuracy in incremental sheet metal forming, GAMM, München, 20.03.2018

Brands, D.; Chugreev, A.; Kock, C.; Niekamp, R.; Scheunemann, L.; Uebing, S.; Behrens, B.-A.; Schröder, J. On the analysis of microstructural  residual stresses in hot bulk forming parts under specific cooling. GAMM 2018, Proc. Appl. Math. Mech., 2018, 18: e201800256, doi:10.1002/pamm.201800256

Schauerte, B., Steentjes, S., Leuning, N., & Hameyer, K.: A continuous parameter-based approach to model the effect of mechanical stress on the electromagnetic hysteresis characteristic. In 2018 IEEE International Magnetics Conference (INTERMAG) (pp. 1-5). IEEE, April 2018

Maaß, F.; Gies, S.; Dobecki, M.; Brömmelhoff, K.; Reimers, W.; Tekkaya, A. E.: Analysis of residual stress state in sheet metal parts processed by Single Point Incremental Forming. AIP-Conference Proceedings. Proceedings of the 21st International ESAFORM Conference on Material Forming, 23-25 May 2018, Palermo, Italy.

Maqbool, Fawad; Hajavifard, Ramin; Walther, Frank; Bambach, Markus: Experimental investigation and finite element modelling of residual stress control in disc springs made of metastable austenitic stainless steel (MASS) using incremental sheet forming (ISF). In: AIP-Conference Proceedings. Proceedings of the 21st International ESAFORM Conference on Material Forming, 23-25 May 2018, Palermo, Italy

Dobecki, M.; Poeche; A., Maaß, F.; Hahn, M.; Reimers, W.; Tekkaya, A. E.: Influence of forming mechanisms on the residual stress state of aluminum sheet metal parts produced by Single Point Incremental Forming. European Conference on Residual Stresses (ECRS10), 11-14 September 2018, Leuven, Belgium.

Baumann, M., Graf, A., Selbmann, R., Brömmelhoff, K., Kräusel, V., Landgrebe, D., Bergmann, M.: Influence of a modified drawing process on the resulting residual stress state of cold drawn wire. MATEC web of Conferences, 5th International Conference on New Forming Technology (ICNFT 2018) 190, 2018. doi:10.1051/matecconf/201819004004

Behrens, B.-A.; Chugreev, A.; Kock, C. Experimental-numerical approach to efficient TTT-generation for simulation of phase transformations in  thermomechanical forming processes. IOP Conf. Ser.: Mater. Sci. Eng. 2018, 461 012040. doi:10.1088/1757-899X/461/1/012040

Bösing, I.; Herrmann, M.; Bobrov, I.; Thöming, J.; Kuhfuß, B.; Epp, J.; Baune, M.: The influence of microstructure deformation on the corrosion resistance of cold formed stainless steel, MATEC Web of Conferences, 190, p. 4002, 2018, doi:10.1051/matecconf/201819004002

Charni, D.; Ishkina, S.; Epp, J.; Herrmann, M.; Schenck, C.; Zoch, H.-W.; Kuhfuß, B.: Generation of residual stresses in rotary swaging process, MATEC Web of Conferences 190, 04001, 2018, doi:10.1051/matecconf/201819004001

Liu, Y.; Herrmann, M.; Schenck, C.; Kuhfuß, B.; Axial and Radial Material Flow Analysis in Infeed Rotary Swaging of Tubes, MATEC Web of Conferences 190, 04003, 2018, doi:10.1051/matecconf/201819004003

Articles

Press Releases