Konferenzbeiträge

2018

  • Achleitner, Johannes, Rohde-Brandenburger, Kai; Reinisch, Joseph; Hornung, Mirko: Numerische Optimierung am Beispiel formvariabler Flügelstrukturen. Seminarreihe Hochleistungsstrukturen im Leichtbau, 2018 mehr…
  • Basirati, M. R.; Zou, M.; Bauer, H.; Kattner, N.; Reinhart, G.; Lindemann, U.; Böhm, M.; Krcmar, H.; Vogel-Heuser, B.: Towards Systematic Inconsistency Identification for Product-Service-Systems. DESIGN 2018, 2018, 2811-2820 mehr…
  • Becerril, Lucia; Hofmann, Bastian; Reif, Julia A. M.; Kattner, Niklas; Lindemann, Udo: Challenges with Implementing Processes, Methods and Tools in R&D. The ISPIM Innovation Forum 2018, 2018 mehr…
  • Becerril, Lucia; Lindemann, Udo: SIMULATION-SUPPORTED PARTICIPATIVE PROCESSES IMPROVEMENT IN ENGINEERING DESIGN. DESIGN 2018, 2018, 725-734 mehr…
  • Goevert, Kristin; Lindemann, Udo: FURTHER DEVELOPMENT OF AN AGILE TECHNIQUE TOOLBOX FOR MECHATRONIC PRODUCT DEVELOPMENT. DESIGN 2018, 2018, 2015-2026 mehr…
  • Goevert, Kristin; Lindner, Manuel; Lindemann, Udo: Survey on agile methods and processes in physical product development. THE ISPIM Innovation Forum 2018, 2018 mehr…
  • Hollauer, Christoph; Langner, Michael; Lindemann, Udo: Supporting tailoring of complex product development processes: An approach based on structural modelling and analysis. DESIGN 2018, 2018, 769-780 mehr…
  • Hollauer, Christoph; Shalumov, Boris; Wilberg, Julian; Omer, Mayada: Graph databases for exploiting use phase data in Product-Service-System development: A Methodology to support implementation. DESIGN 2018, 2018, 1571-1582 mehr…
  • Korus, Jan-Dominik; Ramos, Pilar Garcia; Schütz, Christoph; Zimmermann, Markus; Müller, Steffen: Top-down development of controllers for highly automated driving using solution spaces. 9th International Munich Chassis Symposium 2018, Springer Vieweg, 2018, - mehr…
  • Vogt, Marc Eric; Duddeck, Fabian; Harbrecht, Helmut; Stutz, Florian; Wahle, Martin; Zimmermann, Markus: Computing solution-compensation spaces using an enhanced Fourier-Motzkin algorithm. GAMM 2018, WILEY-VCH Verlag GmbH & Co, 2018, - mehr…
  • Weidmann, Dominik; Stenger, Marcel; Mörtl, Markus: Future Oriented Planning of Product-Service Systems. Lecture Notes in Electrical Engineering, Springer Nature Singapore Pte Ltd., 2018, 299-310 mehr…
  • Wilberg, Julian; Fahrmeier, Larissa; Hollauer, Christoph; Omer, Mayada: Deriving a Use Phase Data Strategy for Connected Products: A Process Model. DESIGN 2018, 2018, 1441-1452 mehr…
  • Wilberg, Julian; Lau, Kathleen; Nützel, Thomas; Hollauer, Christoph; Omer, Mayada: Development of a use case catalogue supporting idea generation for Internet of Things use cases. DESIGN 2018, 2018 mehr…

2017

  • Becerril, Lucia; Knoll, Marvin; Kattner, Niklas; Lindemann, Udo: Visualizing Information Flow in Engineering Change Management Processes. Proceedings of the 19th International DSM Conference Espoo (Finland), 11–13 September 2017, 2017 mehr…
  • Achleitner, Johannes, Rohde-Brandenburger, Kai; Reinisch, Joseph; Hornung, Mirko: Forschungsaktivitäten im Bereich formvariabler Segelflugzeugflügel an der TU München. Symposium für Segelflugzeugentwicklung, 2017 mehr…
  • Becerril, Lucia; Heinrich, Veronika; Böhmer, Annette; Schweigert, Sebastian; Lindemann, Udo: Engineering Change Management within agile Product Development – A Case Study. 6th International Conference on Reseach into Design (ICoRD´17) , Springer Nature Singapore , 2017 mehr…
  • Becerril, Lucia; Hollauer, Christoph; Kattner, Niklas; Weidmann, Dominik; Lindemann, Udo: How to assess the acceptability of design support. Tag des Systems Engineering, Carl Hanser Verlag GmbH & Co. KG , 2017 mehr…
  • Becerril, Lucia; Stahlmann, Jan-Timo; Beck, Jesco; Lindemann, Udo: USABILITY OF PROCESSES IN ENGINEERING DESIGN. Proceedings of the International Conference on Engineering Design, ICED, 2017 mehr…
  • Benta, Christian; Wilberg, Julian; Hollauer, Christoph; Omer, Mayada: Process model for data-driven business model generation. ICED17 21st International Conference on Engineering Design, 21-25 August, 2017, 2017, 347-356 mehr…
  • Böhmer, Annette Isabel; Grauvogl, Constantin; Schweigert, Sebastian; Becerril, Lucia; Devecka, Jakub; Bahrouni, Zièd; Lindemann, Udo: Towards Agile Development of Physical Products. 23rd ICE/IEEE ITMC, 2017, 90-97 mehr…
  • Böhmer, Annette Isabel; Hugger, Philipp; Lindemann, Udo: Scrum within Hardware Development. 23rd ICE/IEEE ITMC, 2017, 811-819 mehr…
  • Böhmer, Annette Isabel; Kayser, Liza; Sheppard, Sheri; Lindemann, Udo: Prototyping as a thinking approach in design. 23rd ICE/IEEE ITMC, 2017, 989-997 mehr…
  • Böhmer, Annette Isabel; Kosiol, Maike; Lindemann, Udo: Agile Mechatronics – Innovation Strategy for Cross-functional Teams in the Age of Uncertainty. XXVIII ISPIM Innovation Conference, 2017, 1-16 mehr…
  • Carro Saavedra, Cristina; Lindemann, Udo: k-MORE - a Methodology to Manage Documented Knowledge for Reuse. 21st International Conference on Engineering Design (ICED 17), The Design Society, 2017, 151-160 mehr…
  • Carro Saavedra, Cristina; Morales Quiles, Jose; Lindemann, Udo: Characteristics of Design Situations Influencing the Knowledge to Reuse. R&D Management Conference, 2017 mehr…
  • Carro Saavedra, Cristina; Serrano Villodres, Teresa; Lindemann, Udo: Review and Classification of Knowledge in Engineering Design. 6th International Conference on Reseach into Design (ICoRD´17), Springer Nature Singapore, 2017 mehr…
  • Christoph Baur, Christopher Münzberg, Udo Lindemann: Designing New Concepts For Household Appliance With The Help Of TRIZ. ICED17 21st International Conference on Engineering Design, 21-25 August, 2017, 2017, 179-188 mehr…
  • Christopher Münzberg, Verena Stingl, Joana Geraldi, Josef Oehmen: Identifying Product Development Crises: The Potential of Adaptive Heursitics. ICED17 21st International Conference on Engineering Design, 21-25 August, 2017, 2017, 189-198 mehr…
  • Goevert, Kristin; Baumgartner Michael; Lindemann, Udo: The Agile Toolbox - Adaption of agileMPPs to the mechatronic development process. Proceedings of the 21st International Conference on Engineering Design (ICED17), The Design Society, 2017, 129-138 mehr…
  • Gövert, Kristin; Gökdemir, Attila; Peitz, Christoph; Lindemann, Udo: Challenges of Agile Development Implementation in Mechatronic Development Processes. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) , 2017 mehr…
  • Hollauer, Christoph; Becerril, Lucia; Kattner, Niklas; Weidmann, Dominik; Chucholowski, Nepomuk; Lindemann, Udo: Adaptable mechatronic engineering design processes: Process reference model and methodology. 6th International Conference on Reseach into Design (ICoRD´17) , Springer Nature Singapore , 2017 mehr…
  • Hollauer, Christoph; Frisch, Bianca; Wilberg, Julian; Omer, Mayada; Lindemann, Udo: Design of flexible product development processes - An automotive case study. ICED17 21st International Conference on Engineering Design, 21-25 August, 2017, Design Society, 2017, 289 - 298 mehr…
  • Hollauer, Christoph; Lindemann, Udo: Design process tailoring: A review and perspective on the literature. 6th International Conference on Reseach into Design (ICoRD´17) , Springer Nature Singapore , 2017 mehr…
  • Hollauer, Christoph; Pavlitzek, Gregor; Mörtl, Markus; Lindemann, Udo: Context-oriented Strategy for Modularization of Engineering Design Processes: An Automotive Case Study. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) , 2017 mehr…
  • Hostettler, Rafael; Böhmer, Annette Isabel; Lindemann, Udo; Knoll, Alois: TAF Agile Framework. 23rd ICE/IEEE ITMC, 2017, 788-796 mehr…
  • Kammerl, Daniel; Echle, Stefan; Mörtl, Markus: Gathering and analysing external influences on the product design - a case study. International Conference on Engineering Design - ICED 2017, 2017 mehr…
  • Kammerl, Daniel; Zink, Roland; Hollauer, Christoph; Lindemann, Udo: A concept for assessing sustainability – The Sustainability Diamond. Research into Design for Communities, Volume 2. Proceeding of ICoRD 2017 (Smart Innovation, Systems and Technologies, Springer, 2017, 189–197 mehr…
  • Kattner, Niklas; Lindemann, Udo: Performance Metrics in Engineering Change Management: Towards a Methodology to Investigate the Efficiency of Handling Engineering Changes. 2017 Proceedings of PICMET '17: Technology Management for Interconnected World, Portland International Center for Management of Engineering and Technology, 2017 mehr…
  • Kattner, Niklas; Mehlstäubl, Jan; Becerril, Lucia; Hollauer, Christoph; Weidmann, Dominik; Lindemann, Udo: A method for the expert-based identification of engineering change propagation. Proceedings of the 21st International Conference on Engineering Design (ICED17), The Design Society , 2017, 633 - 642 mehr…
  • Kohl, Markus; Wilberg, Julian; Tommelein, Iris; Pikas, Ergo; Lindemann, Udo: Modularization: Exploring opportunities for knowledge transfer between the mechanical engineering and construction industry. ICED17 21st International Conference on Engineering Design, 21-25 August, 2017, 2017, 227 - 236 mehr…
  • Kremer, Simon; Schlimm, Alexander; Lindemann, Udo: The ExodUX Framework: Supporting Comprehensive User Experience Design. 2017 Proceedings of PICMET '17: Technology Management for Interconnected World, Portland International Center for Management of Engineering and Technology , 2017 mehr…
  • Lang, Alexander; du Maire, Michael; Lindemann Udo: Torn between risks and chances – What is the optimum point of openness in the R&D process? The ISPIM Innovation Forum, 2017 mehr…
  • Rozov, V.; Hermanutz, A.; Breitsamter, C.; Hornung, M.: Aeroelastic Analysis of a Flutter Demonstrator with a Very Flexible High-Aspect-Ratio Swept Wing. IFASD [International Forum on Aeroelasticity and Structural Dynamics], 2017 mehr…
  • Schmidt, Tobias Sebastian; Böhmer, Annette Isabel; Wallisch, Anne; Patzold, Kristin; Lindemann, Udo: Media Richness Theory in Agile Development. 23rd ICE/IEEE ITMC, 2017, 537-546 mehr…
  • Schmied, Christian; Gebhardt, Marcel; Mörtl, Markus; Lindemann, Udo: Expert Based Approach to Analyse and Influence Indirect Cost of Engineering Changes. Proceedings of the 21st International Conference on Engineering Design (ICED 17) Vol 4: Design Methods and Tools, 2017, 663-672 mehr…
  • Schweigert, S. , Lindemann, U., Seitz, V., Wintermantel, E.: Methodical product development in medical engineering—A case study on radiography systems. 6th International Conference on Research into Design, ICoRD 2017 (Smart Innovation, Systems and Technologies), 2017 mehr…
  • Schweigert, Sebastian; Marahrens, Nils-Jorge; Carro Saavedra, Cristina; Lindemann, Udo: Industrial Evaluation of a Toolkit of Methods for Engineering Knowledge Management of Simulations. Conference proceedings of the Design Management Academy, The Design Society, 2017DESIGN MANAGEMENT ACADEMY CONFERENCE 2017 - Research Perspectives on Creative Intersections, 1393-1410 mehr…
  • Schweigert, Sebastian; Schöner, Martin; Lindemann, Udo: Pattern Recognition for the Integration of Mechanical Simulations in Product Development Workflows. Proceedings of the 21st International Conference on Engineering Design (ICED17), The Design Society, 2017, 399-408 mehr…
  • Schweigert, Sebastian; Xia, Minghai; Lindemann, Udo: An Empirical Survey on Efficiency Improvement for the Collaboration Between Design and Simulation Departments. Proceedings of the 21st International Conference on Engineering Design (ICED17), The Design Society, 2017, 337-346 mehr…
  • Stahl, P.; Sendner, F.- M.; Rößler, C.; Hornung, M.; Hermanutz, A.: Mission and Aircraft Design of FLEXOP Unmanned Flying Demonstrator to Test Flutter Suppression within Visual Line of Sight. AIAA Aviation Forum, 2017 mehr…
  • Weidmann, Dominik; Becerril, Lucia; Hollauer, Christoph; Kattner, Niklas; Lindemann, Udo: A Network-Based Approach to Identify Lacking Coordination Using Higher Order Links. Proceedings of the 21st International Conference on Engineering Design (ICED17), 2017, pp. 405-414 mehr…
  • Weidmann, Dominik; Isemann, Moritz; Kandlbinder, Peter; Hollauer, Christoph; Kattner, Niklas; Becerril, Lucia; Lindemann, Udo: Product Models in Mechatronic Design. 2017 Proceedings of PICMET '17: Technology Management for Interconnected World, Portland International Center for Management of Engineering and Technology, 2017 mehr…
  • Wilberg, Julian; Heitzer, Felix; Hollauer, Christoph; Omer, Mayada: Goal System Management for Use-Oriented Product-Service Systems. 2017 Proceedings of PICMET '17: Technology Management for Interconnected World, Portland International Center for Management of Engineering and Technology, 2017 mehr…
  • Wilberg, Julian; Schäfer, Fabian; Kandlbinder, Peter; Hollauer, Christoph; Omer, Mayada; Lindemann, Udo: Data Analytics in Product Development: Implications from Expert Interviews. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) , 2017 mehr…
  • Zink, Lukas; Böhmer, Annette Isabel; Hostettler, Rafael; Lindemann, Udo; Knoll, Alois: The use of prototypes within agile product development. 23rd ICE/IEEE ITMC, 2017, 80-89 mehr…

2016

  • Abram, Laura; Münzberg, Christopher; Lindemann, Udo: Crisis Situations in Engineering Product Development: Elaboration of Principles for effective Crisis Solving. Proceedings of NordDesign 2016 , 2016, Volume 2, p. 93 - 102 mehr…
  • Achleitner, J.; Baier, H.: CellSkin - a new flexible shell structure for a morphing wing aircraft. International Conference on Composite Structures (19th, Porto, 2016), 2016 mehr…
  • Becerril, Lucia; Sauer, Michael; Lindemann, Udo: Estimating the effects of Engineering Changes in early stage product development. Proceedings of the 18th International DSM Conference , USP - Sao Paulo, 2016 mehr…
  • Bock, Julius; Wilberg, Julian; Lindemann, Udo: Supplier Integration in Product Development: a Search for Existing Approaches in other Industries. Proceedings of the DESIGN 2016 14th International Design Conference, Design Society, 2016, 1215 - 2224 mehr…
  • Bruse, Florian; Böhmer, Annette Isabel; Lindemann, Udo: Cooperation between large companies and start-ups: the access to drive disruptive innovation. NordDesign 2016, 2016, 115-136 mehr…
  • Böhmer, Annette Isabel; Lindemann, Udo: Agile Innovation - Challenges while Implementing Agile Approaches within complex mechatronic processes of large corporations. ISPIM Innovation Summit 2016: Moving the Innovation Horizon Conference, 2016, 1-14 mehr…
  • Böhmer, Annette Isabel; Richter, Christoph; Hostettler, Rafael; Schneider, Philip; Plum, Ines; Böhler, Dominik; Lindemann, Udo; Conradt, Jörg; Knoll, Alois: Think.Make.Start. - An Agile Framework. Proceedings of the DESIGN 2016 14th International Design Conference , 2016, 917-926 mehr…
  • Carro Saavedra, Cristina; Marahrens, Nils-Jorge; Schweigert, Sebastian; Kestel, Philipp; Kremer, Simon; Wartzack, Sandro; Lindemann, Udo: Development of a Toolkit of Methods for Simulations in Product Development. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2016 mehr…
  • Chucholowski, Nepomuk; Kriegler, Johannes; Hollauer, Christoph; Kattner, Niklas; Becerril, Lucia; Weidmann, Dominik; Lindemann, Udo: Systematic Partitioning in Mechatronic Product Development by Modeling Structural Dependencies. Proceedings of the 18th International DSM Conference, 2016, 57-66 mehr…
  • Chucholowski, Nepomuk; Lehmer, Katharina; Rebentisch, Eric; Lindemann, Udo: Synchronization in Product Development Projects: A Literature Study on Challenges and Practices. Proceedings of the DESIGN 2016 14th International Design Conference, 2016, 1465-1474 mehr…
  • Chucholowski, Nepomuk; Starke, Phillip; Moser, Bryan R.; Rebentisch, Eric; Lindemann, Udo: Characterizing and Measuring Activity Dependence in Engineering Projects. Proceedings of the Portland International Conference on Management of Engineering & Technology 2016, 2016 mehr…
  • Craig, Forest; Hashemi Farzaneh, Helena; Weinmann, Julian; Lindemann, Udo: Quantitative Survey and Analysis of Five Maker Spaces at Large, Research-Oriented Universities. 2016 ASEE Annual Conference & Exposition, 2016 mehr…
  • Fernandez Miguel, Rodrigo; Carro Saavedra, Cristina; Lindemann, Udo: Factors influencing knowledge application - A review from the knowledge management field. DESIGN 2016, 2016, 985-995 mehr…
  • Goevert, Kristin; Cloutier, Robert; Roth, Michael; Lindemann, Udo: Concept of System Architecture Database Analysis. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), IEEE, 2016, 410-414 mehr…
  • Guertler, Matthias R.; Lindemann, Udo: Innovationsmanagement. In: Lindemann, Udo (Hrsg.): Handbuch Produktentwicklung. Carl Hanser Verlag, 2016, 483-511 mehr…
  • Guertler, Matthias R.; Stahl, Stephanus; Muenzberg, Christopher; Lindemann, Udo: Analysing the influence of planning-parameters on Open Innovation performance. The XXVII ISPIM Innovation Conference – Blending Tomorrow’s Innovation Vintage, 2016, 1-11 mehr…
  • Guertler, Matthias Rudolf; Becerril, Lucia; Lindemann, Udo: How to Identify Suitable Collaboration Strategies for Open Innovation? International Design Conference - DESIGN 2016, 2016, 1005-1014 mehr…
  • Harnischfeger, Milan; Schatz, Markus; Baier, Horst; Mertiny, Pierre: Validation of Design Optimization Approach for Polymer Composite Piping. PVP (Pressure Vessels & Piping Conference), 2016 mehr…
  • Hashemi Farzaneh, Helena; Helms, Maria Katharina; Münzberg, Christopher; Lindemann, Udo: Technology-pull and biology-push approaches in bio-inspired design – comparing results from empirical studies on student teams. Proceedings of DESIGN 2016, the 14th International Design Conference, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb., 2016, 231-240 mehr…
  • Hollauer, Christoph; Hornauer, Lennart; Lindemann, Udo: Process Maturity Models for the Development of Mechatronic Products. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) , IEEE, 2016 mehr…
  • Hollauer, Christoph; Kattner, Niklas; Lindemann, Udo: Towards a Methodology to Support the Development of Flexible Company-Specific Engineering Design Processes. Proceedings of the Portland International Conference on Management of Engineering & Technology 2016 , Portland State University, Department of Engineering & Technology Management , 2016, 2018 - 2030 mehr…
  • Hollauer, Christoph; Riebl, Peter; Becerril, Lucia; Kattner, Niklas; Weidmann, Dominik; Chucholowski, Nepomuk; Ruhland, Karl; Amann, Karl; Lindemann, Udo: An approach for improving method and model application in engineering design processes: Case study of a German plant engineering company. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) , IEEE, 2016 mehr…
  • Holle, Maik; Elsesser, Luisa; Schuhmacher, Matthias; Lindemann, Udo: How to Motivate External Open Innovation-Partners: Identifying Suitable Measures. PICMET Portland International Conference on Management of Engineering & Technology, Portland State University, Department of Engineering & Technology Management, 2016 mehr…
  • Kammerl, Daniel; Novak, Gabriel; Hollauer, Christoph; Mörtl, Markus: Integrating Usage Data into the Planning of Product-Service Systems. 2016 IEEE International Conference on Engineering and Engineering Management (IEEM 2016) , IEEE, 2016 mehr…
  • Kattner, Niklas; Wang, Tianyi, Lindemann, Udo: Performance Metrics in Engineering Change Management – Key Performance Indicators and Engineering Change Performance Levels. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) , IEEE, 2016, 1180 - 1184 mehr…
  • Kohl, Markus; Roth, Michael; Lindemann, Udo: Safety-oriented Modular Function Deployment. Proceedings of NordDesign 2016, Design Society, 2016, 103-113 mehr…
  • Kremer, Simon; Günther, Stefan, Lindemann, Udo: Roles in User Experience Design - Transferring insights from experience oriented disciplines. Proceedings of the 10th International Conference on Design & Emotion, Celebration & Contemplation, 27-30 Sept. 2016, Amsterdam, The Design & Emotion Society, 2016, 473-482 mehr…
  • Kremer, Simon; Lindemann, Udo: Extracting Insights from Experience Designers to Enhance User Experience Design. 5th International Conference, DUXU 2016, Held as Part of HCI International 2016, Toronto, Canada, July 17–22, 2016, Proceedings, Part I, Springer International Publishing, 2016, 304-313 mehr…
  • Kremer, Simon; Sies, Tony, Lindemann, Udo: Designing Meaningful User Experiences: Interactive Learning Experience Model. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) , IEEE, 2016, 286-290 mehr…
  • Lang, Alexander; Telkamp, Sarah; Lindemann, Udo: Lead User in Open Organizations, How a Refined Lead User Concept can help to Integrate Workshop Results. The 14th International Open and User Innovation Conference, 2016 mehr…
  • Lang, Alexander; Tesch, Anna Teresa: Opening up the R&D process is risky - how far do you have to go in order to beat your competitors? The ISPIM Innovation Summit, 2016 mehr…
  • Mahl, M.; Klaproth, T.; Baier, H.: Thermo-mechanische Untersuchungen von Hochleistungskunststoffen für kryogene Wasserstoffdrucktanks. Symposium Material Innovativ 2016, 2016 mehr…
  • Maisenbacher, Sebastian; Behncke, Florian; Roth, Michael; Fleckenstein, Franz; Roos, Reinhard: Integrated Value Engineering - Increasing the value of a forklift subsystem. 2016 IEEE International Systems Conference (SysCon 2016) Proceedings, IEEE, 2016, 916-921 mehr…
  • Maisenbacher, Sebastian; Fürtbauer, Daniel; Behncke, Florian; Lindemann, Udo: INTEGRATED VALUE ENGINEERING - IMPLEMENTATION OF VALUE OPTIMIZATION POTENTIALS. Proceedings of the DESIGN 2016 14th International Design Conference, Faculty of Mechanical Engineering and Naval Architecture, 2016, 361-370 mehr…
  • Maisenbacher, Sebastian; Goevert, Kristin; Moertl, Markus; Lindemann, Udo: Supporting Product Platform Decisions with Lifecycle Costing. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) , IEEE , 2016, 1325-1329 mehr…
  • Michailidou, Ioanna; Franzen, Florian; Lindemann, Udo: Method to create market-specific customer profiles for enhancing positive user experiences in cars. 14th International Design Conference, The Design Society, 2016, 1763-1772 mehr…
  • Michailidou, Ioanna; Lindemann, Udo: Exploring the actual practice of user experience and scenario-based methods. 14th International Design Conference, The Design Society, 2016, 1783-1794 mehr…
  • Michailidou, Ioanna; Lindemann, Udo: Managing user experience design: The role of a "storykeeper". 14th International Design Conference, The Design Society, 2016, 1773-1782 mehr…
  • Muenzberg, Christopher; Gericke, Kilian; Oehmen, Josef; Lindemann, Udo: An Exploratory Study of Crises in Product Development. 14th International Design Conference DESIGN 2016, 2016, 1533 - 1542 mehr…
  • Müller, Martina; Roth, Michael; Lindemann, Udo: The Hazard Analysis Profile: Linking Safety Analysis and SysML. 2016 Annual IEEE Systems Conference, IEEE, 2016, 1-7 mehr…
  • Omer, Mayada; Venkataraman, Srinivasan; Wilberg, Julian; Hollauer, Christoph: A knowledge management framework for identifying innovation potentials from use phase information. 14th International Design Conference , The Design Society, 2016, 1905-1914 mehr…
  • Rosner, Andreas; Hollauer, Christoph; Kammerl, Daniel; Omer, Mayada; Mörtl, Markus: Evaluation of life cycle analysis case studies: Findings for application and further development. 14th International Design Conference , The Design Society, 2016, 453-462 mehr…
  • Roth, Michael; Beetzen, Christoffer von; Lindemann, Udo: Matrix-based Multi-hierarchy Fault Tree Generation and Evaluation. 2016 Annual IEEE Systems Conference, IEEE, 2016, 1-7 mehr…
  • Roth, Michael; Gantenbein, Felix: Model-based Hazard and Propagation Assessment of Product Changes. 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, ASME, 2016 mehr…
  • Roth, Michael; Mayr, Lisa; Lindemann, Udo: A Knowledge Framework for Safety Analysis of User-Induced Changes. Proceedings of the DESIGN 2016 14th International Design Conference, Design Society, 2016, 1553–1562 mehr…
  • Roth, Michael; Mayr, Lisa; Ploetner, Maik; Lindemann, Udo: A continuous toolchain for User-Driven Customization. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), IEEE, 2016, 597–601 mehr…
  • Roth, Michael; Münzberg, Christopher; Lindemann, Udo: A Method to Explicate Safety Functions. Proceedings of the DESIGN 2016 14th International Design Conference, Design Society, 2016, 463–472 mehr…
  • Schatz, Markus E.; Hermanutz, Andreas; Baier, Horst J.: Multi-criteria optimization of an aircraft propeller considering manufacturing. Structural and Multidisciplinary Optimization, 2016 mehr…
  • Schmidt, Danilo Marcello; Breyer, Manuel; Lindemann, Udo: Servitizationof on-campus mobility - A sharing system for electric skateboards. 5th Korea Conference on Service Design, Sungkyunkwan University, Creative Design Institute, 2016 mehr…
  • Schmidt, Danilo Marcello; Brüderle, Peter; Mörtl, Markus: Focusing Aspects of Customer Acceptance for Planning Product-Service Systems – A Case Study from Construction Machines Industry. 26th CIRP Design Conference, Elsevier, 2016, 830-835 mehr…
  • Schmidt, Danilo Marcello; Böttcher, Lena; Wilberg, Julian; Kammerl, Daniel; Lindemann, Udo: Modeling Transfer of Knowledge in an Online Platform of a Cluster. 26th CIRP Design Conference, Elsevier, 2016, 712-717 mehr…
  • Schmidt, Danilo Marcello; Hübner, Daniel; Mörtl, Markus: Product-Service Systems for Increasing Customer Acceptance Concerning Perceived Complexity. 4th International Conference on Serviceology, Society for Serviceology, 2016, 001-006 mehr…
  • Schmied, Christian; Gebhardt, Marcel; d'Albert, Hugo; Mörtl, Markus: Erweiterung der Design for Cost Methodik für indirekte Änderungskosten. Design for X - Beiträge zum 27. DfX-Symposium Oktober 2016, Tutech Verlag, 2016, 77-88 mehr…
  • Schmied, Christian; Gebhardt, Marcel; d'Albert, Hugo; Mörtl, Markus; Lindemann, Udo: Analyse des Systemverhaltens und Beeinflussung indirekter Änderungskosten. Tag des Systems Engineering 2016, Carl Hanser, 2016, 87-96 mehr…
  • Schweigert, Sebastian; D'Albert, Hugo; Lindemann, Udo: Enhancement of Collaboration and Communication between Design and Simulation Departments by Methods of Requirements Engineering. Proceedings of the DESIGN 2016 14th International Design Conference, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, 2016, 1397-1406 mehr…
  • Schweigert, Sebastian; Carro Saavedra, Cristina; Marahrens, Nils-Jorge; Lindemann, Udo: A Process Standardization Approach to Enhance Design Verification. R&D Management Conference 2016 “From Science to Society: Innovation and Value Creation”, 2016 mehr…
  • Schweigert, Sebastian; Çavuşoğlu, Mesut; Lindemann, Udo: Enhancing Collaboration between Design and Simulation Departments by Methods of Complexity Management. SUSTAINABILITY IN MODERN PROJECT MANAGEMENT Proceedings of the 18th International DSM Conference, 2016, 033-042 mehr…
  • Ungwattanapanit, T.; Baier, H.: Gradient-Based Optimization of Steered-Fibre Aircraft Panels with Postbuckling Consideration using Equivalent Static Loads. AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference [57., San Diego, 2016], 2016 mehr…
  • Utz, Andreas; Wilberg, Julian; Lindemann, Udo: Design for Logistics: Development of a Process Model. NordDesign 2016, 2016 mehr…
  • WEHRLE, R.; BAIER, H.: GRID BASED CONTOUR PARAMETERIZATION AND OPTIMIZATION OF EXTRUDED ALUMINUM PROFILES CONSIDERING STRUCTURAL AND MANUFACTURING ASPECTS. JOURNAL ON STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, 2016 mehr…
  • Weidmann, Dominik; Burgenmeister, Martin; Pfeiffer, Sabine; Lindemann, Udo: Open Organization in Engineering Design. NordDesign 2016, 2016 mehr…
  • Weidmann, Dominik; Chucholowski, Nepomuk; Lindemann, Udo: CHALLENGES IN IMPLEMENTING MODULE AND PLATFORM STRATEGIES IN PLANT ENGINEERING COMPANIES. Proceedings of the DESIGN 2016 14th International Design Conference, 2016 mehr…
  • Weidmann, Dominik; Kattner, Niklas; Hollauer, Christoph; Becerril, Lucia; Chucholowski, Nepomuk; Lindemann, Udo: Methods Collection to Support Requirements Engineering with Focus on Structuring and Consolidation of Requirements. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), IEEE, 2016, 1215-1219 mehr…
  • Weinzierl, M.; Antonelli, V.; Baier, H.: Design and certification of CFRP chopper disks for the NEAT II TOF spectrometer: A lesson learned. ECCM17 - 17th European Conference on Composite Materials [6, 2016, Munich], 2016 mehr…
  • Weinzierl, M.; Baier, H.: Design and Optimization of a hub for a CFRP disk rotating at a very high speed. International Conference on Composite Structures (19th, Porto, 2016), 2016 mehr…
  • Weinzierl, M.; Schatz, M.; Antonelli, V.; Baier, H.: Structural design optimization of CFRP chopper disks. Composite Structures (140), 2016, pp. 351-359 mehr…
  • Wilberg, Julian; Maisenbacher, Sebastian; Lindemann, Udo: Proactive Cost Management: Integrating Use Phase Data to Reduce Uncertainty. NordDesign 2016, 2016 mehr…
  • Wilberg, Julian; Preißner, Stephanie; Dengler, Christian; Füller, Kathrin; Gammel, Josef; Kernschmidt, Konstantin ; Kugler, Katharina; Vogel-Heuser, Birgit: Performance measurement in interdisciplinary innovation processes – Transparency through structural complexity management. 18th International Dependency and Structure Modelling Conference, DSM 2016, 2016, 11-22 mehr…
  • d'Albert, Hugo; Lindemann, Udo: Engineering Design Education: Practical Methods of Product Development. 2016 International Conference on Design and Manufacturing Engineering , SAISE, 2016, 1-6 mehr…
  • d'Albert, Hugo; Schweigert, Sebastian; Lindemann, Udo: Anwendung von Anforderungsschablonen im Simulationsdatenmanagement. NAFEMS, 2016 mehr…
  • da Rocha-Schmidt, L.; Baier, H.: Ein Entwurfsprozess für Formvariable Strukturen mit Beispielen aus der Luft- und Raumfahrt. 4SMARTS Symposium für Smarte Strukturen und Systeme, 2016 mehr…

2015

  • Antonelli, V. ; Weinzierl, M.; Baier, H.: Feasibility study of a sandwich chopper disc for a time of flight (TOF) spectrometer. ICCM 20 - 20th International Conference on Composite Materials [7, 2015, Copenhagen], 2015 mehr…
  • Antonelli, V.; Weinzierl, M.; Baier, H.: CFRP chopper discs: state of the art and long term perspective. DENIM 2015 - 4th Design and Engineering of Neutron Instruments Meeting [9, 2015, Budapest], 2015 mehr…
  • Baier, H.: Lightweight design of fiber composite structure with emphasis on vibration behavior. International Conference on Dynamics of Composite Structures, 2015 mehr…
  • Baier, H.; Wehrle, R.; Ungwattanapanit, T.: Definition alternativer Rumpfbauweisen von Verkehrsflugzeugen über modellbasierte Entwurfsoptimierung. DGLR Jahrestagung, 2015 mehr…
  • Bauer, Wolfgang; Elezi, Fatos; Roth, Michael; Maurer, Maik: Determination of the Required Product Platform Flexibility from a Change Perspective. 2015 9th Annual IEEE International Systems Conference (SysCon), IEEE, 2015, 20-26 mehr…
  • Behncke, Florian G. H.; Kayser, Liza; Lindemann, Udo: Matching Product Architecture and Supply Network - Systematic Review and Future Research. 20th International Conference on Engineering Design (ICED15), The Design Society, 2015 mehr…
  • Behncke, Florian G. H.; Thimet, Paula; Barton, Benjamin; Lindemann, Udo: Influence of Design-for-X Guidelines on the Matching between the Product Architecture and Supply Networks. 20th International Conference on Engineering Design (ICED15), The Design Society, 2015 mehr…
  • Böhmer, Annette Isabel; Beckmann, Andreas; Lindemann, Udo: Open Innovation Ecosystem - Makerspaces within an Agile Innovation Process. ISPIM Innovation Summit (The Proceedings of the ISPIM Innovation Summit: Changing the Innovation Landscape), The International Society for Innovation Management , 2015 mehr…
  • Böhmer, Annette Isabel; Lindemann, Udo: Open Innovation Ecosystem: Towards Collaborative Innovation. 20th International Conference on Engineering Design (ICED15), 2015 mehr…
  • Carro Saavedra, Cristina; Fernandez Miguel; Lindemann, Udo: A worker-centered-model to understand the factors influencing knowledge application. 11th International Conference on Knowledge Management (ICKM 2015), 2015 mehr…
  • Carro Saavedra, Cristina; Lindemann, Udo: Increasing the amount of knowledge reuse from engineering design repositories. Doctoral Consortium of 7th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management (DC3K 2015), 2015, 21-30 mehr…
  • Chucholowski, Nepomuk; Lindemann, Udo: An Initial Metamodel to Evaluate Potentials for Graphbased Analyses of Product Development Projects. Proceedings of the 17th International DSM Conference, Carl Hanser Verlag, 2015, 75-88 mehr…
  • Da Rocha-Schmidt, Luiz; Hermanutz, A.; Baier, H.: A Morphing Lip Concept for Shape Variable Aircraft Engine Nacelles. DGLR Jahrestagung, 2015 mehr…
  • Gramüller, B.; Stroscher, F.; Schmidt, J.: Design process and manufacturing of an unmanned blended wing-body aircraft. Deutscher Luft- und Raumfahrtkongress, 2015 mehr…
  • Großmann, Daniel J.; Kasperek, Daniel; Stahl, Benjamin; Lohmann, Boris; Maurer, Maik: Supporting PSS Innovation Processes by an Integrating Model Grid. 7th Industrial Product-Service Systems Conference - PSS, industry transformation for sustainability and business, 2015 mehr…
  • Guertler, Matthias R.; Fleischer, Sarah; Lindemann, Udo: Structural Analysis for Assessing and Managing Risks in Open Innovation. Stuttgarter Symposium für Produktentwicklung, 2015 mehr…
  • Guertler, Matthias R.; Haymerle, Richard; Endres, Florian; Lindemann, Udo: Identifying Open Innovation partners: a case study in plant manufacturing. The ISPIM Innovation Summit 2015, 2015, 1-18 mehr…
  • Guertler, Matthias R.; Schaefer, Simon; Lipps, Johannes; Stahl, Stephan; Lindemann, Udo: Archaeonics - How to use archaeological solutions for modern product development. 20th International Conference on Engineering Design (ICED15), 2015, 65-76 mehr…
  • Guertler, Matthias R.; Schaefer, Simon; Lipps, Johannes; Stahl, Stephan; Lindemann, Udo: Archaeonics - How to use archaeological solutions for modern product development. Proceedings of the 20th International Conference on Engineering Design (ICED15), 2015, 65-76 mehr…
  • Guertler, Matthias R.; Wiedemann, Francesco; Lindemann, Udo: The relevance of stakeholder analysis for Open Innovation. The R&D Management Conference 2015, 2015 mehr…
  • Guertler, Matthias R.; von Saucken, Constantin; Schneider, Maria; Lindemann, Udo: How to search for Open Innovation partners? 20th International Conference on Engineering Design (ICED15), 2015, 21-30 mehr…
  • Guertler, Matthias R.; von Saucken, Constantin; Tesch, Anna-Teresa; Damerau, Thomas; Lindemann, Udo: Systematic selection of suitable Open Innovation methods. The XXVI ISPIM Innovation Conference 2015, 2015 mehr…
  • Hashemi Farzaneh, Helena; Helms, Maria Katharina; Lindemann, Udo: Visual representations as a bridge for engineers and biologists in bio-inspired design collaborations. International Conference on engineering Design, ICED15, Design Society, 2015 mehr…
  • Hashemi Farzaneh, Helena; Helms, Maria Katharina; Lindemann, Udo: Influence of information and knowledge from biology on the variety of technical solution ideas. International Conference on engineering Design, ICED15, Design Society, 2015 mehr…
  • Hermanutz, A.; Da Rocha-Schmidt, L.; Baier, H.: Technology Investigation of Morphing Inlet Lip Concepts for Flight Propulsion Nacelles. EUCASS [6., 2015, Krakau], 2015 mehr…
  • Hirth, Nicco; Maisenbacher, Sebastian; Kasperek, Daniel; Hollauer, Christoph; Maurer, Maik: An Approach to Reveal Starting Points for PSS Design Support with Dynamic Models. 7th Industrial Product-Service Systems Conference - PSS, Industry Transformation for Sustainability and Business, Elsevier, 2015, 462-467 mehr…
  • Hollauer, Christoph; Venkataraman, Srinivasan; Omer, Mayada: A Model to describe use phase of socio-technical sphere of product-service systems. 20th International Conference on Engineering Design (ICED15), The Design Society, 2015 mehr…
  • Hollauer, Christoph; Wilberg, Julian; Omer, Mayada: A Matrix-based Framework to Support Dynamic Modelign of Sociotechnical Systems. Modeling and managing complex systems, Carl Hanser Verlag , 2015 mehr…
  • Hollauer, Christoph; Zäpfel, Martin; Kammerl, Daniel; Omer, Mayada; Lindemann, Udo: Sustainability Indicators - Overview, Synthesis and future Research Directions. EcoDesign 2015 - Sustainability Through lnnovation in Product Life Cycle Design, Springer , 2015 mehr…
  • Holle, M.; Maisenbacher, S.; Lindemann, U.: Design for Open Innovation - Individualization-Oriented Product Architecture Planning. 2015 9th Annual IEEE International Systems Conference (SysCon 2015), 2015, 397-402 mehr…
  • Holle, Maik; Gonnermann, Clemens; Lindemann, Udo: Customer Individual Product Development – Assessment of Individualization Potential. ISPIM Innovation Summit (The Proceedings of the ISPIM Innovation Summit: Changing the Innovation Landscape), The International Society for Innovation Management, 2015 mehr…
  • Häußler, M.; Schatz, M.; Baier, H.; Mertiny, P.: Optimization of polymer composite pipe under consideration of hybridization. ASME 2015 Pressure Vessels and Piping Conference, 2015 mehr…
  • Kammerl, Daniel; Schockenhoff, Damian; Hollauer, Christoph; Weidmann, Dominik; Lindemann, Udo: A Framework for Sustainable Product Development. EcoDesign 2015 - Sustainability Through lnnovation in Product Life Cycle Design, Springer, 2015 mehr…
  • Kasperek, Daniel; Berger, Sandra; Maisenbacher, Sebastian; Lindemann, Udo; Maurer, Maik: Structure-based System Dynamics Analysis - A Case Study of Benchmarking Process Optimization. 20th International Conference on Engineering Design (ICED15), Design Society, 2015 mehr…
  • Kasperek, Daniel; Bermond, Lukas; Zaggl, Michael A.; Raasch, Christina; Maurer, Maik S: Structure-based System Dynamics Analysis – A Case Study of Line Process Optimization. 2015 IEEE International Systems Conference (SysCon 2015) , 2015 mehr…
  • Kasperek, Daniel; Roth, Michael; Lozano, Christopher; Lindemann, Udo: Ein Leitfaden zur marktorientierten top-down Modularisierung im Maschinen- und Anlagenbau. Tag des Systems Engineering 2015, Carl Hanser, 2015, 377-386 mehr…
  • Kosiol, Maike; Böhmer, Annette Isabel; Lindemann, Udo: Case Study: Individualization of a fully automated coffee machine. 20th International Conference on Engineering Design (ICED15), 201520th International Conference on Engineering Design (ICED15) mehr…
  • Kosiol, Maike; Weidmann, Dominik; Kammerl, Daniel; Lindemann, Udo: Potential of Common Methods to Integrate Sustainability Requirements in the Product Development Process – a Case Study. EcoDesign 2015 - Sustainability Through lnnovation in Product Life Cycle Design, Springer , 2015 mehr…
  • Kremer, Simon; Hoffmann, Andreas; Lindemann, Udo: Transferring Approaches from Experience Oriented Disciplines to User Experience Design: The ExodUX Model. iasdr 2015 interplay, Proceedings, International Association of Societies of Design Research (IASDR), 2015, 1163-1175 mehr…
  • Kremer, Simon; Lindemann, Udo: Learning from Experience Oriented Disciplines for User Experience Design - A Research Agenda. Design, User Experience, and Usability: Design Discourse, Springer International Publishing, 20154th International Conference, DUXU 2015, Held as Part of HCI International 2015, Los Angeles, CA, USA, August 2-7, 2015, Proceedings, Part I, S.306-314 mehr…
  • Lachner, Florian; Saucken, Constantin von; Müller, Florian; Lindemann, Udo: Cross-Cultural User Experience Design: Helping Product Designers to Consider Cultural Differences. 7th International Conference on Cross-Cultural Design, Springer, 2015, 58-70 mehr…
  • Lang, Alexander; Lindemann Udo: Transforming companies into Open Organisations to help Open Innovation to succed at last. The 13th International Open and User Innovation Conference, 2015 mehr…
  • Mahl, M.; Friemel, M.; Capobianco, L.; Haridas, A.; Baier, H.: Influences of Adhesive Properties on Strain Measurement Result of Rayleigh Backscattering Based Fibre Optic Sensors. IWSMH (International Workshop on Structural Health Monitoring), 2015 mehr…
  • Maisenbacher, Sebastian; Fink, Stefanie; Behncke, Florian; Lindemann, Udo: Analysis of correlations between system structure and costs by structural criteria. Modeling and managing complex systems, Proceedings of the 17th International DSM Conference, Hanser, 2015, 161-171 mehr…
  • Maisenbacher, Sebastian; Stanglmeier, Max; Behncke, Florian: Integrated Value Engineering – Adapted Approach to Assess different Concepts of a Jet Engine. 9th Annual IEEE International Systems Conference, IEEE, 2015, 263-268 mehr…
  • Michailidou, Ioanna; Haid, Charlotte; Gebauer, Cornelia; Lindemann, Udo: The two-stage stroyboarding experience design method. 2015 IASDR Conference: Interplay, International Association of Societies of Design Research, 2015, 1470-1485 mehr…
  • Münzberg, Christopher; Bennour, Essalah; Venktaraman, Srinivasan; Lindemann, Udo: Crisis situations in engineering product development - An understanding from literature. Stuttgarter Symposiums für Produktentwicklung 2015, IRB Mediendienstleistungen , 2015, 1-8 mehr…
  • Ozdemir, N. G.; Scarpa, F.; Craciun, M.; Remillat, C.; Lira, C.; Jagessur, Y.; da Rocha-Schmidt, L.: Morphing nacelle inlet lip with pneumatic actuators and a flexible nano composite sandwich panel. Smart Materials and Structures Vol. 24, Nr. 12, 2015 mehr…
  • Roth, Michael; Gehrlicher, Steffi; Lindemann, Udo: Safety of Individual Products - Perspectives in the Context of Current Practices and Challenges. 20th International Conference on Engineering Design (ICED15), Design Society, 2015, 113-122 mehr…
  • Roth, Michael; Guertler, Matthias; Lindemann, Udo: Identifying and Utilizing Technological Synergies—A Methodological Framework. ICoRD’15 – Research into Design Across Boundaries, Springer, 2015, 291-302 mehr…
  • Roth, Michael; Harmeling, Jonas; Michailidou, Ioanna; Lindemann, Udo: The "Ideal" User Innovation Toolkit - Benchmarking and Concept Development. 20th International Conference on Engineering Design (ICED15), Design Society, 2015, 249-260 mehr…
  • Roth, Michael; Kronfeldner, Laura; Kasperek, Daniel; Lindemann, Udo: A Framework to Assess the Cost Impact of Organization and Processes in Complex Systems. Tag des Systems Engineering 2015, Carl Hanser, 2015, 217-226 mehr…
  • Roth, Michael; Nerb, Anton; Kasperek, Daniel; Lindemann, Udo: A tool to bridge the gap from functional dependencies to configuration rules translating knowledge on functional restrictions from systems engineers to a configurator for sales and decision makers. 2015 9th Annual IEEE International Systems Conference (SysCon), IEEE, 2015, 158-163 mehr…
  • Sadi, Tarek; Behncke, Florian G. H.; Maisenbacher, Sebastian; Kremer, Simon: Integrated Value Engineering - Framework for the Application of Methods for Visualization of Information. 20th International Conference on Engineering Design (ICED15), The Design Society, 2015 mehr…
  • Schatz, M.; Baier, H.: Effizierte Strukturoptimierung von Flechtstrukturen mit Hilfe entkoppelter Mehrskalenhomogenisierung und Berücksichtigung von Fertigungsrestriktionen. Landshuter Leichtbau Colloqium, 2015 mehr…
  • Schatz, M.; Baier, H.: Optimization of laminated structures considering manufacturing efforts. World Congress of Structural and Multidisciplinary Optimisation (WCSMO), 2015 mehr…
  • Schmidt, Danilo Marcello; Haas, Marc; Kammerl, Daniel; Wilberg, Julian; Kissel, Maximilian Philipp; Lindemann, Udo: Analyzing industrial clusters using measures of structural complexity management. DSM Conference, Carl Hanser Verlag, 2015, 41-51 mehr…
  • Schmidt, Danilo Marcello; Malaschewski, Oliver; Fluhr, Daniel; Mörtl, Markus: Customer-oriented Framework for Product-Service Systems. 7th Industrial Product-Service Systems Conference - PSS, industry transformation for sustainability and business, Elsevier, 2015, 289-292 mehr…
  • Schmidt, Danilo Marcello; Malaschewski, Oliver; Jaugstetter, Matthias; Mörtl, Markus: Service Classification to Support Planning Product-Service Systems. Asian Design Engineering Workshop (A-DEWS), 2015, 34-39 mehr…
  • Schmidt, Danilo Marcello; Malaschewski, Oliver; Mörtl, Markus: Decision-making process for Product Planning of Product-Service Systems. 7th Industrial Product-Service Systems Conference - PSS, industry transformation for sustainability and business, Elsevier, 2015, 468-473 mehr…
  • Schmidt, Danilo Marcello; Mörtl, Markus: Product-Service Systems for Increasing Customer Acceptance Concerning Perceived Complexity. Asian Design Engineering Workshop (A-DEWS), 2015, 77-82 mehr…
  • Schmidt, Danilo Marcello; Preißner, Stephanie; Hermosillo Martínez, José Alonso; Quiter, Michael; Mörtl, Markus; Raasch, Christina: Integration of User Knowledge Across the Lifecycle of Integrated Product-Service Systems - An Empirical Analysis of the Relevance for PSS Development and Management. 20th International Conference on Engineering Design (ICED15), 2015, 199-208 mehr…
  • Schmied, Christian; Reinbold, Georg; Amekrane, Rachid; Igenbergs, Eduard; Mörtl, Markus; Lindemann, Udo: Extended Cost Analysis with Systems Engineering Considerations. Tag des Systems Engineering, Carl Hanser, 2015, 227-236 mehr…
  • Schweigert, Sebastian; D'Albert, Hugo; Lindemann, Udo: An Approach for the Development of Requirements-Oriented Simulation Management. NAFEMS European Conference: Simulation Process and Data Management (SPDM), 2015, 123-126 mehr…
  • Schöttl, Florian; Lindemann, Udo: Quantifying the Complexity of Socio-technical Systems – A Generic, Interdisciplinary Approach. 2015 Conference on Systems Engineering Research, Elsevier BV, 2015, 1-10 mehr…
  • Staack, H.; Seibert, D.; Baier, H.: Application oriented failure modeling and characterization for polymers in automotive pedestrian protection. International Conference on Computational Plasticity (COMPLAS). Fundamentals and Application [8., Barcelona, 2015], 2015 mehr…
  • Stroscher, F.; Schirrer, A.; Valasek, M.: Numerical Simulation Model. In: Modeling and control of a blended wing body aircraft. Springer, 2015 mehr…
  • Ungwattanapanit, T.; Kamath, S.; Sasikumar, A.; Baier, H.: Gradient-based Optimization of Postbuckled Steered-Fiber Aircraft Shell via ESLM. European Altair Technology Conference (EATC), 2015 mehr…
  • Weidmann, Dominik; Lindemann, Udo: Towards a Framework of an Open Organization. The XXVI ISPIM Innovation Conference 2015 , 2015 mehr…
  • Weinzierl, M.; Achleitner, J.; Baier, H.: Highly Extensible Skin of a Variable Geometry Wing Leading Edge of a High-Performance Sailplane. Technical Soaring (Vol. 39, No. 1), 2015, pp. 4-9 mehr…
  • Weinzierl, M.; Baier, H.: Leichtbau bei extrem schnell rotierenden Scheiben für neutronenphysikalische Versuchsanlagen. Leichtbauseminar, 2015 mehr…
  • Weinzierl, M.; Baier, H.; Krämer, L.; Antonelli, V.: Design and certification of the chopper disks for the NEAT II TOF spectrometer: A lesson learned. DENIM 2015 - 4th Design and Engineering of Neutron Instruments Meeting [9, 2015, Budapest], 2015 mehr…
  • Wickel, Martina; Lindemann, Udo: How to build up an Engineering Change dependency model based on past change data? Modeling and managing complex systems, Carl Hanser Verlag, 2015, 221-231 mehr…
  • Wickel, Martina; Lindemann, Udo: How to integrate information about past Engineering Changes in new change processes ? 20th International Conference on Engineering Design (ICED15), Design Society, 2015, 229-238 mehr…
  • Wilberg, Julian; Elezi, Fatos; Tommelein, Iris; Lindemann, Udo: Using a Systemic Perspective to Support Engineering Change Management. Complex Adaptive Systems, Elsevier B.V. , 2015, 287 – 292 mehr…
  • Wilberg, Julian; Elezi, Fatos; Tommelein, Iris; Lindemann, Udo: Supporting the Implementation of Engineering Change Management with the Viable System Model. IEEE International Conference on Systems, Man, and Cybernetics (SMC2015), 2015 mehr…
  • Wilberg, Julian; Hollauer, Christoph; Omer, Mayada: Supporting the Performance Assessment of Product-Service Systems during the Use Phase. 7th Industrial Product-Service Systems Conference - PSS, industry transformation for sustainability and business, Elsevier, 2015, 203–208 mehr…
  • d'Albert H., Venkataraman S., Omer M.: Application of System Dynamics for Modeling Product-Service Systems. ICETA 2015, 2015 mehr…
  • d'Albert, Hugo; Carro Saavedra, Cristina; Lindemann, Udo: Elicitation of Requirements for a knowledge-based Framework in Product Development Process. 11th International Conference on Knowledge Management (ICKM2015) , 2015 mehr…
  • d'Albert, Hugo; Carro Saavedra, Cristina; Maurer Maik: Business Knowledge Development using Knowledge Maps. International Conference on Business and Internet – Fall Session (ICBI 2015-Fall) , 2015 mehr…
  • von Saucken, Constantin; Wenzler, Andreas; Lindemann, Udo: How to Impress Your User: Guideline for Designing the Product Impression. ICoRD’15 – Research into Design Across Boundaries, Springer, 20155th International Conference on Research into Design 2015 (ICoRD '15), 193-203 mehr…

2014

  • Allaverdi, D.; Herberg A.; Lindemann U.: Identification of Flexible Design Opportunities (FDO) in offshore drilling systems by market segmentation. Proceedings of the DESIGN 2014 13th International Design Conference, 2014, 1451-1462 mehr…
  • Angevain, Jean-Christophe; Rodrigues, Goncalo; Santiago Prowald, Julian; Mangenot, Cyril; Datashvil, L.: Sidelobe Level Reduction of Faceted Mesh Reflector Antenna Using Phyllotactic Arrangements. International Conference on Advanced Lightweight Structures and Reflector Antennas, 2014 mehr…
  • Baier,H.; Endler,S.: Fiber-metal-composites for synthesizing electro-magnetic and mechanical behavior. SSMET, 2014, 6 mehr…
  • Bauer, Wolfgang; Braun, Felix; Elezi, Fatos; Maurer, Maik: Monetary Evaluation of Platform Strategies. 8th Annual IEEE International Systems Conference (SysCon), IEEE, 2014, 567-574 mehr…
  • Bauer, Wolfgang; Chucholowski, Nepomuk; Lindemann, Udo ; Maurer, Maik: Domain-Spanning Change Propagation in Changing Technical Systems. First Asia-Pacific Conference on Complex Systems Design & Management (CSD&M Asia 2014), Springer, 2014, 111-123 mehr…
  • Bauer, Wolfgang; Elezi, Fatos; Maurer, Maik: Situative Selection of Platform Design Methods. 4th International Engineering Systems Symposium CESUN 2014, 2014 mehr…
  • Bauer, Wolfgang; Kasperek, Daniel, Maisenbacher, Sebastian; Maurer, Maik: Application of Structural Domain - Spanning Criteria in an Industrial Case - Study. The 16 th International Dependency and Structure Modelling Conference, 2014DSM 2014, 348-357 mehr…
  • Bauer, Wolfgang; Werner, Christopher; Elezi, Fatos; Maurer, Maik: Forecasting of Future Developments based on Historic Analysis. 13th International Design Conference DESIGN 2014, The Design Society, 2014, 735-748 mehr…
  • Becerril, Lucia; Kasperek, Daniel; Roth, Michael; Lindemann, Udo: Visualization of Interdisciplinary Functional Relations in Complex Systems. Proceedings of the DESIGN 2014 13th International Design Conference, The Design Society, 2014, 1239-1248 mehr…
  • Behncke, F. G. H.; Eichinger, J.; Lindemann, U.: Involvement of Procurement in the Product Creation Process: A Systematization Scheme of Measures. 47th CIRP Conference on Manufacturing Systems, Elsevier, 2014, 546-551 mehr…
  • Behncke, F. G. H.; Holstein, J.; Lindemann, U.: Method for the Supplier Selection in Supply Chain Networks - An Approach of Structural Complexity Management. Systems Conference (SysCon), 2014 8th Annual IEEE, IEEE, 2014, 497-504 mehr…
  • Behncke, F.G.H.; Maisenbacher, S.; Maurer, M.: Extended model for integrated value engineering. Conference on Systems Engineering Research (CSER 2014), Elsevier, 2014, 781-788 mehr…
  • Bossemeyer, Mona; Aydin, Kadir; Metzler, Torsten; Lindemann, Udo: ANALYSIS OF THE SYSTEMATIC APPROACH TO DEVELOP COGNITIVE PRODUCTS IN ACADEMIC RESEARCH PROJECTS. 13th International DESIGN Conference - DESIGN 2014, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, 2014, 759-771 mehr…
  • Böhmer, A.I.; Zöllner, A.M.; Kuhl, E.; Lindemann, U.: Medical Device Design Process: A Medical Engineering Perspective. 13th International Design Conference, Design Society, 2014, 749-758 mehr…
  • Böhmer, Annette Isabel; Zöllner, Alexander Martin, Kuhl, Ellen; Lindemann, Udo: Medical Device Design Process: A Medical Engineering Perspective. 13th International Design Conference , Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb , 2014, 749-758 mehr…
  • Böhmer, Annette; Zöllner, Alexander; Kuhl, Ellen; Lindemann, Udo: Towards an Instrumented Tissue Expander. Proceedings of the 2014 IEEE - International Conference on Industrial Engineering and Engineering Management, IEEE, 2014, 14 mehr…
  • Carro Saavedra, C.; Schrieverhoff, P.; Lindemann, U.: A Knowledge-based Approach to Optimize Simulations in the Product Development Process. ICADRE 2014, 2014 mehr…
  • Carro Saavedra, C.; Schrieverhoff, P.; Lindemann, U.: Analysing the Concept of Value to Identify Relevant Stakeholders' Preferences in Design for Adaptability. DESIGN CONFERENCE 2014, 2014, 141-152 mehr…
  • Chucholowski, Nepomuk; Schoettl, Florian; Bauer, Wolfgang; Schenkl, Sebastian A.; Behncke, Florian; Lindemann, Udo: A Process Taxonomy Model for Engineering Design Research. Modelling and Management of Engineering Processes, Springer , 2014Proceedings of the 3rd International Conference 2013, 1-10 mehr…
  • Datashvili, L.; Baier, H.: Derivation of Different Types of Antenna Reflectors from the Principle of Highly Flexible Structures. European Conference on Antennas and Propagation [8., The Hague, The Netherlands, 2014], 2014 mehr…
  • Datashvili, L.; Baier, H.; Endler, S.; Maghaldadze, N.; Friemel, M.; Luo, T.; Bedukadze, G; Chkhikvadze, K.; Ihle, A.; Santiago-Prowald, J.: Demensional stability and shape-accuracy of shell-membrane reflecting surfaces made of fiber-reinforced elastomers. International Conference on Advanced Lightweight Structures and Reflector Antennas [2., 2014, Tbilisi], 2014 mehr…
  • Datashvili, L.; Bedukadze, G.: Challenges in ground testing of large space lightweight structures. International Conference on Advanced Lightweight Structures and Reflector Antennas [2., 2014, Tbilisi], 2014 mehr…
  • Datashvili, L.; Maghaldadze, N.; Pauw, J.; Endler, S.: Advanced Architectures of Large Space Deployable Reflectors: from Medium to Very Large Sizes. International Conference on Advanced Lightweight Structures and Reflector Antennas [2., 2014, Tbilisi], 2014 mehr…
  • Elezi, Fatos; Schmidt, Michael Timo; Tommelein, Iris; Lindemann, Udo: Analyzing Implementation of Lean Production Control with the Viable System Model. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2014 mehr…
  • Endler, S.; Datashvili, L.; Baier, H.; Roose, S.: Enhancement of the Electro-Magnetic Behaviour of Flexible Fiber Composite Materials by Surface Coating. International Conference on Advanced Lightweight Structures and Reflector Antennas [2., 2014, Tbilisi], 2014 mehr…
  • Friemel, M.; Maghaldadze, N.; Baier, H.; Datashvili, L.: Alternative Thermoelastic Deformation Measurement Techniques for Space Structures in Laboratoy Conditions. International Conference on Advanced Lightweight Structures and Reflector Antennas [2., 2014, Tbilisi], 2014 mehr…
  • Friemel,M.; Baier,H.: Thermal Testing of CFRP Under A High Number Of Temperature Cycles. SSMET, 2014 mehr…
  • Guertler, M. R.; Holle, M.; Guber, D.; Lindemann, U.: How to Determine a Companys Open Innovation Situation. 13th International Design Conference DESIGN 2014, 2014, 1541-1550 mehr…
  • Guertler, M. R.; Holle, M.; Lindemann, U.: Open Innovation: Industrial Application and Demands – a Qualitative Study. The R&D Management Conference 2014, Fraunhofer Verlag, 2014, 1024-1030 mehr…
  • Guertler, M. R.; Lewandowski, P.; Lindemann, U.: Stakeholder-Analysis featuring Open Innovation. XXV ISPIM Conference - Innovation for Sustainable Economy and Society, 2014 mehr…
  • Hass, Johannes; Rensch, Christian; Salvamoser, Ruben; Münzberg, Christopher; Lindemann, Udo; Mayer, Oliver: Experimental Proof of the Creative Value of TRIZ. The 10th International Conference - TRIZfest-2014, International TRIZ Association - MATRIZ, 2014, 144-152 mehr…
  • Helms, S.; Behncke, F. G. H.; Lindlöf, L.; Wickel, M. C.; Chucholowski, N.; Lindemann, U.: Procedure Model for the Indication of Change Propagation. 13th International Design Conference DESIGN 2014, 2014, 221-230 mehr…
  • Helms, S.; Behncke, F. G. H.; Lindlöf, L.; Wickel, M. C.; Maisenbacher, S.; Lindemann, U.: Classification of methods for the Indication of Change Propagation - A Literature Review. 13th International Design Conference DESIGN 2014, 2014, 211-220 mehr…
  • Hollauer, Christoph; Wickel, Martina; Lindemann, Udo: Learning from past changes - towards a learning-oriented engineering change management. Proceedings of the 2014 IEEE International Conference on Industrial Engineering and Engineering Management, IEEE, 2014 mehr…
  • Holle, M.; Lindemann, U.: Design for Open Innovation (DfOI) – Product Structure Planning for Open Innovation Toolkits. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) 2014, 2014 mehr…
  • Holle, M.; Roth, M.; Guertler, M. R.; Lindemann, U.: From Customer Innovations to Manufactured Products: A Project Outlook. International Conference on Innovation, Management and Technology, 2014, 918-923 mehr…
  • Holle, M.; du Maire, M. N.; Lindemann, U.: Motivation of External Open Innovation Partners. International Conference on Advanced Design Research and Education (ICADRE), 2014, 150-155 mehr…
  • Ihle, A.; Datashvili, L.; Schmidt, J.; Hartmann, D.; Proietti Zolla, P.; Santiago-Prowald, J.: Scalable - Innovative Scalable Large Deployable Antenna Reflector. European Conference on Spacecraft Structures, Materials & Environmental Testing, 2014 mehr…
  • Kaiser, Maria Katharina; Hashemi Farzaneh, Helena; Lindemann, Udo: BIOSCRABBLE – THE ROLE OF DIFFERENT TYPES OF SEARCH TERMS WHEN SEARCHING FOR BIOLOGICAL INSPIRATION IN BIOLOGICAL RESEARCH ARTICLES. 13th International Design Conference - Proceedings, Faculty of Mechanical Engineering and Naval Architecture, 2014, 241 - 250 mehr…
  • Kasperek, Daniel; Chucholowski, Nepomuk; Maisenbacher, Sebastian; Lindemann, Udo; Maurer, Maik: A Method for Impact Analysis of Cyclic Changes within Innovation Processes of PSS. Procedia CIRP (2014), Elsevier B.V., 2014 6th CIRP Conference on Industrial Product-Service Systems mehr…
  • Kasperek, Daniel; Maisenbacher, Sebastian; Maurer, Maik: Structure-based Compilation of System Dynamics Models for Assessing Engineering Design Process Behavior. The 16th International DSM Conference, 2014DSM 2014, 233-242 mehr…
  • Kasperek, Daniel; Maisenbacher, Sebastian; Maurer, Maik: Structure-based Analysis of Dynamic Engineering Process Behavior. 2014 IEEE International Systems Conference (SysCon 2014), 2014 mehr…
  • Kasperek, Daniel; Maisenbacher, Sebastian; Maurer, Maik: Assessing Process Sequences in Engineering Design by DSM-based System Dynamics Simulation. 4th International Engineering Systems Symposium, CESUN 2014, 2014 mehr…
  • Kasperek, Daniel; Maisenbacher, Sebastian; Maurer, Maik: Structure-based Compilation of System Dynamics Models for Assessing Engineering Design Process Behavior. The 16th International DSM Conference, 2014DSM 2014, 233-242 mehr…
  • Kremer, Simon; Michailidou, Ioanna; von Saucken, Constantin; Lindemann, Udo: User Experience Milestones - Structuring the Development of Experience Products. Design, User Experience, and Usability. Theories, Methods, and Tools for Designing the User Experience , Springer International Publishing, 2014Third International Conference, DUXU 2014, Held as Part of HCI International 2014, Heraklion, Crete, Greece, June 22-27, 2014, Proceedings, Part I, 308-318 mehr…
  • Lang, Alexander; Bauer, Lara; Lindemann Udo: Socially indicated Match Making Method, SIM3, an Alternative Way of Identifying the right OI Method. 1st Annual World Open Innovation Conference, 2014 mehr…
  • Maisenbacher, Sebastian; Weidmann, Dominik; Kasperek, Daniel; Omer, Mayada: Applicability of Agent-Based Modeling for Supporting Product-Service System Development. Product Services Systems and Value Creation. Proceedings of the 6th CIRP Conference on Industrial Product-Service System, Elsevier, 2014, 356-361 mehr…
  • Medzmariashvili, E.; Santiago Prowald, J.; Mangenot, C.; Datashvili, L.; Tsignadze, N.; Scialino, L., Van´t Klooster, K.; Janikashvili, M.; Tusishvili, O.; Philipenko, L.; Medzariashvili, N.; Jakhua, A.: New Constructions of Lightweight Deployable Reflectors. International Conference on Advanced Lightweight Structures and Reflector Antennas, 2014 mehr…
  • Medzmariashvili, E.; Tsignadze, N.; Santiago Prowald, J.; Datashvili, L.; Tusishvili, O.; Phavlenishvili, G.: Conical V-Fold Bar Ring with Flexible Pre-stressed Center. International Conference on Advanced Lightweight Structures and Reflector Antennas [2., 2014, Tbilisi], 2014 mehr…
  • Michailidou, Ioanna; von Saucken, Constantin; Kremer, Simon; Lindemann, Udo: A User Experience Design Toolkit. Design, User Experience, and Usability. Theories, Methods, and Tools for Designing the User Experience, Springer International Publishing, 2014Third International Conference, DUXU 2014, Held as Part of HCI International 2014, Heraklion, Crete, Greece, June 22-27, 2014, Proceedings, Part I mehr…
  • Michailidou, Ioanna; von Saucken, Constantin; Kremer, Simon; Lindemann, Udo: Managing Complexity in User Experinece Design: Matrix-based Methods for Connecting Technologies and User Needs. Proceedings of the 13th International Design Conference DESIGN 2014, 2014, 559-568 mehr…
  • Moya Carreras, D.; Carro Saavedra, C.; Schrieverhoff, P.; Haupt, S.; Lindemann, U.: Identification of Key Parameters for Adaptable Design. ICADRE 2014, 2014 mehr…
  • Muenzberg, C.; Michl, K.; Heigl, H.; Jeck, T.; Lindemann, U.: FURTHER DEVELOPMENT OF TRIZ FUNCTION ANALYSIS BASED ON APPLICATIONS IN PROJECTS. 13th International Design Conference DESIGN 2014, 2014, 333 - 342 mehr…
  • Münzberg, Christopher; Heigl, Hubertus; Schrieverhoff, Phillip; Lindemann, Udo: Development of a plastic recycler applying TRIZ. The 10th International Conference - TRIZfest-2014, International TRIZ Association - MATRIZ , 2014, 117-128 mehr…
  • Omer, Mayada; Ganguly, Anirban; Behncke, Florian; Hollauer, Christoph: A Complexity Driven Approach for Risk Evaluation in Use-Oriented Product-Service Systems Supply Chains. Proceedings of the 2014 9th International Conference on Systems of Systems Engineering (SoSE), IEEE, 2014, 290-295 mehr…
  • Omer, Mayada; Mostashari, Ali; Lindemann, Udo: Resilience Analysis of Soft Infrastructure Systems. Conference on Systems Engineering Research (CSER 2014), Elsevier BV, 2014, 565-574 mehr…
  • Pucillo, Francesco; Michailidou, Ioanna; Cascini, Gaetano; Lindemann, Udo: Storytelling and a narrative analysis based method for extracting users´ motives in UX design processes. Proceedings of NordDesign 2014, Aalto Design Factory Aalto Univeristy, 2014 mehr…
  • Rapp,S.; Kuisl,A.; Zauner,C.; Reinicke,G.; Baier,H.: Experimental Verification of a Micro-Vibration Analysis Software for Pointing Error Prediction of Space Optical Instruments. European Conference on Spacecraft Structures, Materials & Environmental Testing, 2014 mehr…
  • Reik, Alexander; Lindemann, Udo: WHAT DOES INNOVATION STRATEGY REQUIRE FROM TECHNOLOGY MANAGEMENT? AN APPROACH FOR INTEGRATING TECHNOLOGY MANAGEMENT ACTIVITIES INTO STRATEGIC PRODUCT PLANNING. 23rd INTERNATIONAL CONFERENCE FOR THE INTERNATIONAL ASSOCIATION OF MANAGEMENT OF TECHNOLOGY, 2014 mehr…
  • Reik, Alexander; Maurer, Maik: Consideration of Dynamics in Knowledge Prioritization: Preparing an Efficient Company-Internal Knowledge Transfer. Innovation Through Knowledge Transfer 2014, 2014 mehr…
  • Roth M., Kasperek D., Lindemann U.: Identifying the Adequate Level of Abstraction Within Structural Modeling. 2014 IEEE International Systems Conference (SysCon 2014) Proceedings, IEEE, 2014, 301–308 mehr…
  • Roth, Michael; Scholz, Simon; Gövert, Kristin; Kasperek, Daniel; Lozano, Christopher; Mund, Hartwig; Lindemann, Udo: Standardisierungskonzept für Kleinserien im Maschinenund Anlagenbau. Tag des Systems Engineering, Carl Hanser, 2014Tag des Systems Engineering 2014, 361–370 mehr…
  • Roth, Michael; Kasperek, Daniel; Lindemann, Udo: Verifying the Abstraction Level of Structural Models. Conference on Systems Engineering Research (CSER 2014), Elsevier BV, 2014, 497-504 mehr…
  • Sauerer, B.; Schatz, M.; Wehrle, E.; Baier,H.: Multistage Structural Optimization in the Design of the Lightweight Electrical Vehicle VisioM. European Altair Technology Conference, 2014 mehr…
  • Schatz, M.; Baier, H.: Structural optimization of braided structures including soft aspects such as manufacturing effort. Mechanics of Composites, 2014 mehr…
  • Schatz, M.; Baier, H.: Durch Berücksichtigung von Fertigungsaufwänden und numerischer Mehrskalenhomogenisierung zur ganzheitlichen Strukturoptimierung von Flechtstrukturen. NAFEMS, 2014 mehr…
  • Schenkl, Sebastian A.; Elser, Hannes; Nilsson, Susanne; Ölund Sandström, Gunilla; Mörtl, Markus; Srinivasan, Venkataraman: A method for assessing the innovativeness of product-service systems. DS 77: Proceedings of the DESIGN 2014 13th International Design Conference, 2014, 985-994 mehr…
  • Schenkl, Sebastian A.; Rösch, Christian; Mörtl, Markus: Literature study on factors influencing the market acceptance of PSS. 6th CIRP Conference on Industrial Product-Service Systems (IPS2 2014) , 2014 mehr…
  • Schenkl, Sebastian A.; Sauer, Roman M.; Mörtl, Markus: A Technology-centered Framework for Product-Service Systems. 6th CIRP Conference on Industrial Product-Service Systems (IPS2 2014) , 2014 mehr…
  • Schenkl, Sebastian A.; Schmidt, Danilo M.; Schockenhoff, Damian; Maurer, Maik: Knowledge Evaluation for PSS Providers. 6th CIRP Conference on Industrial Product-Service Systems (IPS2 2014) , 2014 mehr…
  • Schenkl, Sebastian A.; Behncke, Florian G. H.; Hepperle, Clemens; Langer, Stefan; Lindemann, Udo: Managing Cycles of Innovation Processes of Product-Service Systems. 2013 IEEE International Conference on Systems, Man and Cybernetics (SMC 2013), IEEE, 2014, 918-923 mehr…
  • Schmid, Lisa-Magdalena; Amereller, Maximilian; Lindemann, Udo: Definition of room functionality for automotive development. Proceedings of the FISITA 2014 World Automotive Congress , 2014 mehr…
  • Schmidt, Danilo Marcello; Bauer, Paul; Mörtl, Markus: Product-Service Systems for Influencing Customer Barriers and Customer Acceptance. International Conference on Business Marketing and Management, IACSIT Press, 2014, 213-217 mehr…
  • Schmidt, Danilo Marcello; Elezi, Fatos; Birth, Paul; Mörtl, Markus: A Literature Review of Irrational Customer Choices at the Point of Sales: Revealing the Need for Integration into Product Design. Academy of World Business, Marketing and Management Development Conference, The Academy of World Business, Marketing, and Management Development, 2014, 329-344 mehr…
  • Schmidt, Danilo Marcello; Schenkl, Sebastian Alexander; Munkhart, Eduard; Nilsson, Susanne; Mörtl, Markus: Interview Study: Decisions and Decision Criteria for Development in Industry. IEEE - International Conference on Industrial Engineering and Engineering Management, Institute of Electrical and Electronics Engineers, 2014 mehr…
  • Schmidt, Danilo Marcello; Schenkl, Sebastian Alexander; Mörtl, Markus: Matrix-based decision-making for compatible systems in product planning concerning technologies for the reduction of CO2-emissions. DSM Conference, Hanser Verlag, 2014, 107-116 mehr…
  • Schmidt, Danilo Marcello; Urquidi Guerrero, Josu; Michailidou, Ioanna; Lindemann, Udo: Differentiated Customer Needs' Analysis for User Experience. IEEE - International Conference on Industrial Engineering and Engineering Management, Institute of Electrical and Electronics Engineers, 2014 mehr…
  • Schmidt, Michael Timo; Elezi, Fatos; Tommelein, Iris; Berghede, Klas; Lindemann, Udo: Supporting Organizational Design Towards Lean with the Viable System Model. 22 nd ANNUAL CONFERENCE of the INTERNATIONAL GROUP for LEAN CONSTRUCTON , IGLC & Akademika forlag, 2014, 2014UNDERSTANDING AND IMPROVING PROJECT BASED PRODUCTION mehr…
  • Schmidt, Michael Timo; Elezi, Fatos; Tommelein, Iris; Lindemann, Udo: Towards Recursive Plan-Do-Check-Act Cycles for Continuous Improvement. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2014 mehr…
  • Schöttl, Florian, Brumeißl David, Lindemann, Udo: Modellierung von Flexibilität in Produktionssystemen - Eine Methode zur Strukturierung von System Lifecycle Properties. Tag des Systems Engineering, Carl Hanser, 2014, 193-202 mehr…
  • Schöttl, Florian; März, Daniel; Lindemann, Udo: Vorgehensweise zur Gestaltung robuster Produktionssysteme am Beispiel der Automobilindustrie. Design for X - Beiträge zum 25. DfX-Symposium, TuTech, 2014, 349-360 mehr…
  • Schöttl, Florian; Paefgen, Max-Christian; Lindemann, Udo: Approach for Measuring Change-Induced Complexity Based on the Production Architecture. 47th CIRP Conference on Manufacturing Systems, Elsevier, 2014, 934-939 mehr…
  • Schöttl, Florian; Lindemann, Udo: Design for System Lifecycle Properties – A Generic Approach for Modularizing Systems. Conference on Systems Engineering Research (CSER 2014), Elsevier BV, 2014, 682-691 mehr…
  • Si, L.; Baier, H.: An Advanced Ensemble Impact Monitoring and Identification Technique for Aerospace Composite Cantilever Structures. European Workshop on Structural Health Monitoring [7., Nantes, 2014], 2014 mehr…
  • Staack, Holger; Seibert, Dominic: On the virtual development of pedestrian protection. International Conference Intelligent Collision Protection and Pedestrian Protection , 2014 mehr…
  • Staack, Holger; Seibert, Dominic; Koukal, Andreas; Baier, Horst: Versuchsbasierte Entwicklung eines industriellen Bruchkriteriums für Kunststoffkomponenten in der Fußgängerschutzauslegung. SIMVEC, 2014 mehr…
  • Tischer, M.; Wehrle, E. J.; Baier, H.: Reduced modeling of crash barriers for design optimization of space frame automobile structures. LS-Dyna Forum, 2014 mehr…
  • Toh, W. X.; Hashemi Farzaneh, H.; Kaiser, M.K.; Lindemann, U.: Analysis of Empirical Studies in Design Research. DESIGN 2014 13th International Design Conference, 2014, 59-70 mehr…
  • Toh, W.X.; Hashemi Farzaneh, H.; Lindemann, U.: Analysis of empirical studies in design research. 13th International Design Conference - Proceedings, Faculty of Mechanical Engineering and Naval Architecture, 2014, 59 - 70 mehr…
  • Ungwattanapanit, T.; Baier, H.: Postbuckling Optimization of Composite Stiffened Fuselage Panels using Steered Fibers. RAeS Aircraft Structural Design Conference [4th., 2014], 2014 mehr…
  • Ungwattanapanit, T.; Baier, H.: Postbuckling analysis and optimization of stiffened fuselage panels utilizing variable-stiffness laminates. Congress of the International Council of the Aeronautical Sciences, ICAS [29., 2014, St. Petersburg], 2014 mehr…
  • Wehrle,R.; Baier,H.: Establishing manufacturing effort models to be used in optimization of extruded aluminium profiles under structural and manufacturing criteria. ManuLight, 2014 mehr…
  • Weinzierl, M.: Highly Extensible Skin of a Shape-variable Wing Leading Edge of a High-Perfomance Sailplane. OSTIV Congress [8, 2014, Leszno], 2014 mehr…
  • Wickel, Martina; Chucholowski, Nepomuk; Behncke, Florian; Lindemann, Udo: Comparison of Seven Company-Specific Engineering Change Processes. Modelling and Management of Engineering Processes , Springer Berlin Heidelberg, 2014Proceedings of the 3rd International Conference 2013, 125-136 mehr…
  • Wickel, Martina; Langer, Stefan; Chucholowski, Nepomuk; Lindemann, Udo: A categorization and visualization scheme to determine Engineering Change Effects in companies. International Conference on Advanced Design Research and Education 2014, 2014, 94-99 mehr…
  • Wickel, Martina; Lindemann, Udo;: A Retrospective Analysis of Engineering Change Orders to Identify Potential for Future Improvements. Proceedings of NordDesign 2014, 2014, 692-701 mehr…
  • da Rocha-Schmidt, L.; Baier, H.: A Shape Variable Gap Cover Concept for Aerodynamic Control Surfaces Based on Shear Deformation. 63. Deutscher Luft- und Raumfahrtkongress, 2014 mehr…
  • da Rocha-Schmidt, L.; Hermanutz, A.; Baier, H.; Seitz, A.; Bijewitz, J.; Isikveren, A. T.; Scarpa3, F.; Allegri, G.; Remillat, C.; Feuilloley, E.; Majic, F.; O’Reilly, C.; Efraimsson, G.: Progress Towards Adaptive Aircraft Engine Nacelles. 29th Congress of the International Council of the Aeronautical Sciences, 2014 mehr…
  • von Saucken, C; Lachner, F; Lindemann, U: Principles for User Experience: What We Can Learn from Bad Examples. International Conference on Kansei Engineering & Emotion Research, Linköping University, 2014 mehr…
  • von Saucken, C; Michailidou, I; Kremer, S; Lindemann, U: Motive-Oriented Design: Helping Automobile Engineers to Take the User's Perspective! Design, User Experience, and Usability, Springer, 2014DUXU 2014, 370-377 mehr…
  • von Saucken, Constantin; Lindemann, Udo: User-Centered Design for Research: Following Our Own Recommendations. International Conference on Advanced Design Research and Education, 2014, 118-122 mehr…
  • Ölmez M.; Lindemann U.: Decision-Maker Modeling for Decision Support Application. DSS 2.0 - Supporting Decision Making with New Technologies (Frontiers in Artificial Intelligence and Applications 261), IOS Press, 2014, 429-440 mehr…
  • Ölmez, Manuela; Lindemann, Udo: Managing Attribute Complexity for User-centered Decision Support Systems. Conference on Systems Engineering Research (CSER 2014), Elsevier BV, 2014, 130-137 mehr…

2013

  • Antonelli, V.; Lohstroh, W.; Baier, H.: Feasibility study on a very large chopper disk for a TOF-TOF spectrometer. ICCM 19 2013 Montreal, Canada, 2013 mehr…
  • Bauer, Wolfgang; Elezi, Fatos; Homann, Florian; Maurer, Maik: The Identification of Limiting and Enabling factors of the Organization on the Development of Platform-based Products. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Bauer, Wolfgang; Elezi, Fatos; Maurer, Maik: An Approach for Cycle-Robust Platform Design. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Behncke, Florian G. H.; Kübel, Teresa; Lindemann, Udo: Supplier Evaluation based on a Product’s Architecture. 15th International Dependency and Structure Modelling Conference, DSM 2013, Carl Hanser, 2013, 89-96 mehr…
  • Chucholowski, Nepomuk; Langer, Stefan; Behncke, Florian G. H.; Lindemann, Udo: Comparison of engineering change cause analysis in literature and industrial practice. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Chudy, P.; Vlk, J.; Leitao, M.; Stroscher, F.: Evoution-driven Controller Design for an Aeroservoelastic Aircraft Model. AIAA MST (Modeling and Simulation Technologies Conference), 2013 mehr…
  • Elezi, F.; Maier, Th. G.; Lindemann, U.: Engineering Change Management Challenges and Management Cybernetics. 2013 IEEE International Systems Conference (SysCon 2013), 201315.-18.04.2013, 567-573 mehr…
  • Elezi, Fatos; Schmidt, Michael; Tommelein, Iris D.; Lindemann, U.: Enhanced Viability in Organizations: An Approach to Expanding the Requirements of the Viable System Model. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Gmeiner, Thomas; Shea, Kristina: A Spatial Grammar for the Computational Design Synthesis of Vise Jaws. ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2013), American Society of Mechanical Engineers, 2013 mehr…
  • Guertler, Matthias R.; Lewandowski, Paulina; Klaedtke, Kevin; Lindemann, Udo: Can Stakeholder-Analysis support Open Innovation? The 6th ISPIM Innovation Symposium – Innovation in the Asian Century, 2013Actors analysis; innovation actors; Lead User; Open Innovation; product development; requirements; stakeholder analysis mehr…
  • Gürtler, Matthias R.; Lindemann, Udo: Situative Open Innovation - A model for selecting the right external actors and involving them in an efficient way. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Gürtler, Matthias R.; Münzberg, Christopher; Lindemann, Udo: Idea in a bottle – A new method for creativity in Open Innovation. ICCC 2013 - The Fourth International Conference on Computational Creativity, 201312. - 14.06.2013, 194 - 197 mehr…
  • Gürtler, Matthias Rudolf; Kain, Andreas; Lindemann, Udo: Bridging the gap: From Open Innovation to an Open Product-Life-Cycle by using Open-X methodologies. International Conference on Research into Design ICoRD'13, 201307.-09.01.2013 mehr…
  • Hashemi Farzaneh, Helena; Kaiser, Katharina: Influence of communication elements and cognitive effects on creative solution search in groups. 19th International Conference on Engineering Design (ICED13), 2013 mehr…
  • Hashemi Farzaneh, Helena; Kaiser, Maria Katharina; Metzler, Torsten; Lindemann, Udo: Cross-disciplinary approaches – indications of a student design project. International Conference on Research into Design ICoRD'13, Springer India, 201307.-09.01.2013, 1151-1163 mehr…
  • Herberg, A.; Lindemann, U.: A different view on system decomposition – subsystem-centered property evaluation in multiple supersystems. Complex Systems Design & Management Conference CSD&M 2013 – CEUR Workshop, 2013, 153 - 164 mehr…
  • Herzberger, Philipp; Behncke, Florian G. H.; Schenkl, Sebastian; Lindemann, Udo: Interactive Modeling and Evaluation of Product-Service-Systems. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Kaiser, Maria Katharina; Hashemi Farzaneh, Helena; Lindemann, Udo: BIOscrabble - Extraction of Biological Analogies out of Large Text Sources. IC3K 2013 - 5th International Joint Conference on Knowlwdge Discovery, Knowledge Engineering and Knowledge Management, 2013, 10-20 mehr…
  • Kasperek, Daniel; Kohn, Andreas; Maurer, Maik: Identifying Uncertainties within Structural Complexity Management. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Kasperek, Daniel; Maurer, Maik: Coupling Structural Complexity Management and System Dynamics to represent the Dynamic Behavior of Product Development Processes. 2013 IEEE International Systems Conference (SysCon 2013), 201315.-18.04.2013, 414-419 mehr…
  • Kasperek, Daniel; Peters, Konrad; Maisenbacher, Sebastian; Maurer, Maik: Development of an Assessment Procedure for the Problem-Specific Selection of Most Suitable Modeling Methods for Complex Systems. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Kasperek, Daniel; Steenweg, Ragna; Maisenbacher, Sebastian; Füller, Kathrin Jasmin; Krcmar, Helmut; Maurer, Maik: Representing Ontologies in Multiple Domain Matrices. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Kirner, K.G.M.; Lindemann, U.: Assessing the Performance of Product Development Processes in a Multi-project Environment in SME. International Conference on Research into Design ICoRD'13, 201307.-09.01.2013 mehr…
  • Kirner, K.G.M.; Siyam, G.I.; Lindemann, U.; Wynn, D.C.; Clarkson, P.J.: Information in Lean Product Development – Assessment of Value and Waste. International Conference on Research into Design ICoRD'13, 201307.-09.01.2013 mehr…
  • Kohn, Andreas; Hollauer, Christoph; Huber, Michael; Lindemann, Udo: Assistentensystem zur Unterstützung der projektspezifischen Arbeit mit Produktmodellen. Stuttgarter Symposium für Produktentwicklung, 2013 mehr…
  • Kohn, Andreas; Lindemann, Udo; Maurer, Maik: Knowledge base for supporting the handling of product models in engineering design. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Kohn, Andreas; Reif, Julia; Wolfenstetter, Thomas; Kernschmidt, Konstantin; Goswami, Suparna; Krcmar, Helmut; Brodbeck, Felix; Vogel-Heuser, Birgit; Lindemann, Udo; Maurer, Maik: Improving common model understanding within collaborative engineering design research projects. International Conference on Research into Design ICoRD'13, 201307.-09.01.2013, 643-654 mehr…
  • Lichtenberg, Christian; Kasperek, Daniel; Maisenbacher, Sebastian; Maurer, Maik: Strukturbasierte Modellierung und Bewertung von Entwicklungsprozessen von Produkt-Service Systemen. Tag des Systems Engineering 2013, 2013 mehr…
  • Maier, Th. G.; Elezi, F.; Lindemann, U.: A Snapshot Approach for Applying the Viable System Model in Management Systems. 2013 IEEE International Systems Conference (SysCon 2013), 201315.-18.04.2013, 431-436 mehr…
  • Maisenbacher, S.; Behncke, F. G. H.; Lindemann, U.: Model for Integrated Value Engineering. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Maisenbacher, S.; Kernschmidt, Konstantin; Kasperek, Daniel; Vogel-Heuser, B.; Maurer, M.: Using DSM and MDM Methodologies to Analyze Structural SysML Models. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Maurer, M.; Maisenbacher, S.: Modeling and Analyzing Systems in Application. ICoRD'13 - Global Product Development, International Conference on Research into Design, Springer, 20137.-9.1.2013, 707-719 mehr…
  • Metzler, Torsten; Jowers, Iestyn; Kain, Andreas; Lindemann, Udo: Development of Cognitive Products via Interpretation of System Boundaries. International Conference on Research into Design ICoRD'13, Springer India, 201307.-09.01.2013, 163-174 mehr…
  • Metzler, Torsten; Lindemann, U.: Improving the Development of Companion Robots for Elderly Care by Integrating Meaningful Cognitive Functions. International Conference on Social Robotics, 2013, 1-6 mehr…
  • Metzler, Torsten; Mosch, Michael; Lindemann, Udo: Meta-Design Catalogs for Cognitive Products. International Conference on Research into Design ICoRD'13, Springer India, 201307.-09.01.2013, 303-316 mehr…
  • Michailidou, Ioanna; von Saucken, Constantin; Lindemann, U.: Extending product specification with emotional aspects: Introducing User Experience Stories. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Reik, Alexander U.; Hashemi Farzaneh, H.; Maurer, Maik: Identifikation und Transfer von Wissen: Ein Fall für Social Media? nowTech 2013 - Kongress für Wissensmanagement und Social Media, 2013 mehr…
  • Reik, Alexander U.; King, Moritz; Lindemann, Udo: Investigation of the Information Generated by Technology Management Tools and Links to Strategic Product Planning Stages. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Schatz, M.; Both, J.; Baier, H.: Experimental and numerical investigation of the stress-free temperature in CFRP and hybrid CFRP-metal composites. SEICO 13 2013, Paris, 2013 mehr…
  • Schenkl, Sebastian A.; Bruse, Florian; Lindemann, Udo: Wissensgetriebene Entwicklung nachahmungsrobuster Produkt-Service Systeme. Stuttgarter Symposium für Produktentwicklung 2013, Fraunhofer Verlag, 201320.06.2013 mehr…
  • Schenkl, Sebastian Alexander; Schneider, Franz-Xaver; Kammerl, Daniel; Orawski, Robert; Hutterer, Philipp; Mörtl, Markus: Methodical Deployment of Quality Criteria. 16th International Conference on Quality and Service Sciences (QMOD-ICQSS), 2013, 1576-1586 mehr…
  • Schenkl, Sebastian Alexander; Spörl, Sebastian; Behncke, Florian G. H.; Orawski, Robert; Mörtl, Markus: Deploying decision criteria in a cyclical decision process for the product planning phase. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Schmidt, D. M.; Schenkl, S. A.; Wickel, M. C.; v. Saucken, C.; Maurer, M.: Multiple-Domain Matrices and Knowledge Maps for Visualizing Knowledge-Driven Scenarios. 15th International Dependency and Structure Modelling Conference, DSM 2013, Carl Hanser, 2013, 55-62 mehr…
  • Schöttl, F.; Herrmann, N.; Maurer, M.; Lindemann,U.: Systematic Procedure for Handling Complexity in the Automotive Production. 5th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV2013), Springer, 2013, 255-260 mehr…
  • Schöttl, Florian; Bauer, Wolfgang; Lindemann, Udo: Design for System Lifecycle Properties – Support of Planning Processes by Modularization of Stakeholder Networks. 15th International Dependency and Structure Modelling Conference, DSM 2013, Carl Hanser, 2013, 125-132 mehr…
  • Si, L.; Chen, Z.; Baier, H.: Real-time health monitoring on impact identification of composite structures with distributed built-in sensor network. SPIE Smart Structures / NDE 2013, San Diego, 2013 mehr…
  • Sop Njindam, T.; Metzler, Torsten; Lindemann, U.; Paetzold, Kristin: A Model-Based Assessment for the Solution Space of a Cognitive Coffee Robot Waiter. Complex Systems Design & Management Conference CSD&M 2013 – CEUR Workshop, 2013, 45 - 57 mehr…
  • Steinhaeusser, Tobias; Elezi, Fatos; Tommelein, Iris D.; Lindemann, Udo: Management Cybernetics as a Theoretical Basis for Lean Thinking. 21st International Group for Lean Construction (IGLC) Conference, 2013, 53-62 mehr…
  • Ungwattanapanit, T.; Zhang, Y.; Baier, H.: Hybrid-Stiffness Laminated Fuselage Panels with Window Cutouts Optimized under Stability and Strength Constraints. CCS 17 2013, Porto, 2013 mehr…
  • Wagner, D.; Staack, H.; Klaus, ; Krampe, E.; Wintermantel, E.: Systematic Design Approach for FRP and Multi-Material Crash Concepts in Electric Energy Storage Systems of Hybrid Electric Vehicles. Polymer Processing Society 29th Annual Meeting (PPS-29) 2013, Nürnberg, 2013 mehr…
  • Wehrle, E.: Design optimization of lightweight structures for electrical vehicles including crashworthiness. Leichtbau-Colloquium 2013, Landshut, 2013 mehr…
  • Wehrle, R.; Ziegler, M.; Baier, H.: Contour optimization of extruded aluminium profile cross-sections, taking into account structural mechanics and manufacturing aspects. 10th World Congress on Structural and Multidisciplinary Optimization 2013, Orlando, 2013 mehr…
  • Wickel, Martina Carolina; Behncke, Florian G. H.; Lindemann, Udo: When to check for deviations in the design process - an approach to determine a systematic checkpoint schedule. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • da Rocha-Schmidt, L.; Baier, H.: Morphing Skins and Gap Covers for Aerodynamic Control Surfaces. Deutscher Luft- und Raumfahrtkongress, 2013 mehr…
  • von Saucken, Constantin; Michailidou, Ioanna; Lindemann, Udo: Emotional Mental Model. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • von Saucken, Constantin; Michailidou, Ioanna; Lindemann, Udo: How to Design Experiences: Macro UX versus Micro UX Approach. HCI International 2013: Design, User Experience and Usability. Web, Mobile, and Product Design, Springer, 2013 mehr…
  • von Saucken, Constantin; Reinhardt, Jakob; Michailidou, Ioanna; Lindemann, Udo: Principles for User Experience Design – Adapting the TIPS Approach for the Synthesis of Experiences. 5th International Congress of International Association of Societies of Design Research, IASDR 2013, 2013, 713 - 722 mehr…
  • Ölmez, M.; Schandera, M.; Kissel, M.; Lindemann, U.: Using Decision Classification Criteria for Knowledge Acquisition and Transfer in Multi-Perspective Decision Making Processes. International Conference on Innovation through Knowledge Transfer InnoKT 2013, The Journal of Innovation Impact, 201311.-12.04.2013, 17 - 30 mehr…

2012

  • Antonelli,V.; Wedekind,M.; Krämer,L.; Baier,H.: The Effect of Production on the efficiency of CFRP Chopper Discs for Time of Flight (TOF) Spectroscopy. SEICO 12 2012, Paris, 2012 mehr…
  • Baier, H.; Datashvili, L.; Endler, S.: Large Deployable Reflectors - also for sub-µm-wavelengths. Proceedings of the ESA/ESTEC Antenna Workshop 2012, Noordwijk, The Netherlands, 2012 mehr…
  • Baier,H.: High Precision Adaptive and Morphing Structures. CIMTEC 2012, Montecassini, Italy, 2012 mehr…
  • Baier,H.; Rapp,S.: Compensation of residual stress induced shape errors in precision structures. European Conference on Spacecraft Structures, Materials & Environmental Testing 2012, Noordwijk, The Netherlands, 2012 mehr…
  • Baier,H.; Stroscher,F.; Maucher,C.: Elasto-Dynamic Control and Load Alleviation in Components excited by unsteady Air flow. International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2012, Honolulu, 2012 mehr…
  • Bauer, Wolfgang; Biedermann, Wieland; Helms, Bergen; Maurer, Maik: A Student Laboratory for Systems Engineering - Teaching Systems Engineering to Students Without Previous SE-Knowledge Based on an Industry-Oriented Example. IEEE International Systems Conference, 201219-22.03.2012, 665 - 670 mehr…
  • Behncke, Florian G. H.; Wickel, Martina; Lindemann, Udo: Managing the economic performance of research-driven initiatives in the field of transdisciplinary research. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 201210.-13.12.2012 mehr…
  • Biedermann, W.; Diepold, K. J.; Lindemann, U.; Lohmann, B.: Delimiting Structural and Dynamical System Analysis in Engineering Management. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1649-1654 mehr…
  • Biedermann, W.; Lindemann, U.: Correlation of Structural Characteristica of Product Design Structure Matrices. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1657- 1666 mehr…
  • Both, J.; Baier, H.: Mode I delamination of hybrid CFRP-metal laminates. Int. Conf. on Composite Materials, 2012 mehr…
  • Daniilidis, Harrys; Bauer, Wolfgang; Eben, Katharina; Lindemann, U.: Compendium for modular and platform based architecting. Conference on Systems Engineering Research (CSER), Elsevier, 201219-22.03.2012 mehr…
  • Datashvili, L.: Foldability Aspects of hinged-rod Systems applicable to the Deployable Space Structures. Proceedings of the ESA/ESTEC Antenna Workshop 2012, Noordwijk, Netherlands, 2012 mehr…
  • Datashvili, L.; Endler, S.; Baier, H.; Langer, H.; Friemel, M.; Tsignadze, N.Santiago-Prowald, J.: Study of Mechanical Architectures of Large Deployable Space Antenna Apertures: From Design to Tests. Proceedings of the ESA/ESTEC Antenna Workshop, 2012 mehr…
  • Datashvili,L.; Langer,H.; Endler,S.; Wei,B.; Tsignadze,N.: "Mechanical Architectures of Large Precision Space Apertures". Proc. European Conference on Spacecraft Structures, Materials & Environmental Testing 2012, Noordwijk, 2012 mehr…
  • Empl, D.; Wehrle, R.; Trapani, M.; Pleißner, M.; Plötner, K.; Hofheinz, N.; Baier, H.: Panoramic Passenger Windows Applied to Transport Aircraft. 3rd Aircraft Structural Design Conference 2012, 2012 mehr…
  • Endler,S.; Baier,H.; Datashvili,L.: Nano-fillers in fiber reinforced polymers for performance enhancement of satellite structures. European Conference on Spacecraft Structures, Materials & Environmental Testing 2012, Noordwijk, Netherlands, 2012 mehr…
  • Friemel,M.; Perterer,M.; Baier,H.: Experimental characterization of dimensionally stable composite materials and components. Proceedings: 3rd Zwick Academia Day, p. 49-64, 2012, München, 2012 mehr…
  • Fuchs,S.; Wehrle,E.; Matz,S.; Lienkamp,M.: MUTE - ein effizientes und marktfähiges Elektrofahrzeug durch intelligenten Leichtbau. 5. Symposium Faszination Karosserie und Fahrzeugkonzepte 2012, Wolfsburg, 2012 mehr…
  • Hashemi Farzaneh, H.; Kaiser, M. K.; Schröer, B.; Srinivasan, V.; Lindemann, U.: Evaluation of Creativity - Structuring Solution Ideas Communicated in Groups Performing Solution Search. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1871- 1870 mehr…
  • Hashemi Farzaneh, Helena; Kaiser, Maria Katharina; Lindemann, Udo: Creative processes in groups - relating communication, cognitive processes and solution ideas. The 2nd International Conference on Design Creativity (ICDC2012), The Design Society, 201218.-20.09.2012, 13-22 mehr…
  • Herberg, Arne; Lindemann, Udo: Supporting system architecture assessment by two-level functional modeling: Process oriented analysis and comparison of large-scale systems. 2012 IEEE International System Conference (SysCon 2012), IEEE Service Center, 201219.-22.03.2012, 296-303 mehr…
  • Ihle, A.; Breunig, E.; Datashvili, L.; Migliorelli, M.; Scialino, L.; van´t Klosters, K.; Santiago-Prowald, J.: Large Deployable Reflector Technologies For Future European Telecom and Earth Observation Missions. Proceedings of the ESA/ESTEC Antenna Workshop, 2012 mehr…
  • Ihle,A.; Breunig,E.; Datashvili,L.; Migliorelli,M.; Scialino,L.; van´t Klosters,K.; Santiago-Prowald,J.: Large Deployable Reflector Technolgies for Future European Telecom and Earth Observation Missions. Proc. European Conference on Spacecraft Structures, Materials & Environmental Testing 2012, Noordwijk, 2012 mehr…
  • Kain, A.; Kirschner, R.; Lindemann, U.: Utilization of Outside -In Innovation Input for Product Development. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 191-200 mehr…
  • Kissel, M.; Bradford, N.; Kreimeyer, M.; Lindemann, U.: Product Structure Management as the Backbone of Engineering Design: Exploration of a Reference Model. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1709- 1718 mehr…
  • Kissel, M.; Schrieverhoff, P.; Lindemann, U.: Design for Adaptability – Identifying Potential for Improvement on an Architecture Basis. NordDesign, 201222.-24.08.2012 mehr…
  • Kohn, A.; Lutter-Günther, M.; Hagg, M.; Maurer, M.: Handling Product Information- Towards an Improved Use of Product Models in Engineering Design. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1719- 1730 mehr…
  • Kortler, S.; Kohn, A.; Lindemann, U.: Validation of Product Properties Considering a High Variety of Complex Products. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1731- 1740 mehr…
  • Königseder, C.; Shea, K.; Campbell, M.; I.: Comparing a Graph-Grammar Approach to Genetic Algorithms for Computational Synthesis of PV Arrays. CIRP Design Conference, Springer Verlag, 201228.-30.03.2012 mehr…
  • Langer, S.; Maier, A. M.; Wilberg, J.; Münch, T. J.; Lindemann, U.: Exploring Differences between Average and Critical Engineering Changes: Survey Results from Denmark. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 223- 232 mehr…
  • Lindemann, Udo; Orawski, Robert: Hybridantriebe im PKW – eine Problemlösung jetzt oder in Zukunft? VPC - Virtual Powertrain Creation 2012 14. MTZ-Fachtagung, Springer, 201225.-26.09.2012 mehr…
  • Orawski, Robert; Hepperle, Clemens; Schenkl, Sebastian; Mörtl, Markus; Lindemann, Udo: Life-cycle oriented requirement formalization and traceability. Product Lifecycle Management : Towards Knowledge-Rich Enterprises, Verlagsname, 2012 mehr…
  • Parvan, M. I.; Miedl, F.; Lindemann, U.: Nature-inspired Process Model for Concept Selection and Evaluation in Engineering Design. NordDesign Conference 2012, 2012, 486 - 493 mehr…
  • Parvan, M.; Oepke, H.; Kaiser, K.; Lindemann, U.: Role Development for Interdisciplinary Collaboration Support in Biomimetics. International Conference on Industrial Engineering and Engineering Management, 201210.-13.12.2012, 832 - 836 mehr…
  • Perterer,M.; Friemel,M.; Baier,H.: Characterization of the influence of Comparative Vacuum Measurement (CVM) sensors in the context of Structural Health monitoring (SHM) systems. 6th European Workshop on Structural Health Monitoring (EWSHM) 2012, Dresden, 2012 mehr…
  • Petersson,Ö.; Baier,H.: Design Optimisation and Sensitivity Analysis Methods for Structural Components in Unsteady Air Flow. Int. Conf. on Rotor Machines Dynamics 2012, Honolulu, 2012 mehr…
  • Plaikner, S.; Kissel, M.; Kreimeyer, M.; Lindemann, U.: An Architecture Framework for Multi-Product Portfolio Management in the Commercial Vehicle Industry. NordDesign 2012, 201222.-24.08.2012 mehr…
  • Pleissner,M.; Trapani,M.; Isikveren,A.; Hornung,M.; Ajaj,R.; Friswell,M.; Wittmann,J.; Baier,H.: "Hierarchical approach for conceptual design of morphing devices. AIAA Conference on Structures, Dynamics and Materials 2012, Honolulu, USA, 2012 mehr…
  • Reinicke,G.; Baier,H.; Grillenbeck,A.; Scharfeld,F.; Hunger,J.; Abou-El-Ela,A.; Löhberg,A.: "Active Vibration Damping of Solar Arrays". European Conference on Spacecraft Structures, Materials & Environmental Testing 2012, Noordwijk, 2012 mehr…
  • Rodrigues, G.; Such-Taboada, M.; Datashvili, L.; Tisgnadze, N.; Medzmariashvili, E.; Santiago-Prowald, J.: Isostatic Cable Net for Large Deployable Antenna Reflector. Proceedings of the ESA/ESTEC Antenna Workshop, 2012 mehr…
  • Schenkl, S. A.; Schneider, D.; Mörtl, M.; Lindemann, U.: PSS For Preventing Product Imitation. The Philosopher's Stone for Sustainability. Proceedings of the 4th CIRP International Conference on Industrial Product-Service Systems,, Springer, 2012, 483-488 mehr…
  • Schenkl, S. A.; Behncke, F. G. H.; Lindemann, U.: Assessing Procedures to Set up Protection Concepts against Product Counterfeiting. 2012 18th International Conference on Engineering, Technology and Innovation (ICE), 201218.-20.06.2012, 327-335 mehr…
  • Schrieverhoff, Phillip; Lindemann, Udo: Teaching TRIZ at TU Munich. TRIZ Future 2012, 201224.-26.10.2012, Seitenzahlen von - bis mehr…
  • Scialino, L.; Migliorelli, M.; Gatti, N.; Breunig, E.; Ihle, A.; Datashvili, L.; van´t Klooster, K.; Santiago Prowald, J.: Reflector Technology Trade-Off for LDA on Telecom and Earth Observation Applications. Proceedings of The ESA/ESTEC Antenna Workshop, 2012 mehr…
  • Siyam, G.I.; Kirner, K.; Wynn, D.C.; Lindemann, U.; Clarkson, P.J.: Relating Value Methods to Waste Types in Lean Product Development. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 93 -102 mehr…
  • Srinivasan, V.; Chakrabarti, A.; Lindemann, U.: A Framework for Describing Functions in Design. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1111- 1122 mehr…
  • Stroscher, F.; Baier, H.: Combining active and passive load alleviation techniques in transport aircraft structural design. Royal Aircraft Society: Aircraft Structural Design Conference, 2012 mehr…
  • Ungwattanapanit, T.; Baier, H.: Strength-Stability Optimization of Hybrid-Stiffness Laminated Plates with Cutouts subjected to Multiple Loads. RAeS Aircraft Structural Design Conference 2012, 2012 mehr…
  • Wedekind, M.; Khoun, L.; Krempl, P.; Baier, H.; Hubert, P.: Impact behavior of thin thermoplastic composites dependant on manufacturing parameters and layup. SAMPE, 2012 mehr…
  • Wehrle, E.; Sauerer, B.; Wehrle, R.; Baier, H.: Ganzheitliche Strukturoptimierung von Fahrzeugkarosserien der Elektromobilität. Fakultätsseminar Mobilität, 2012 mehr…
  • Wei,B.; Datashvili,L.: "Cable web design for precision large deployable reflectors". Proceedings of the Workshop on Large Deployable Antennas 2012, Noordwijk, Holland, 2012 mehr…
  • Xu,Q.; Baier,H.: "Physical-mathematical Structure Concerned Metamodel for Multidisciplinary Design Optimization". Third International Workshop on Surrogate Modelling and Space Mapping For Engineering Optimization 2012, Reykjavik University, Iceland, 2012 mehr…
  • Zauner,C.; Gohlke,M.; Friemel,M.; Schmitt,S.; Steglich,D.; Weise,D.: CTE-Measurement of the Bepi Colombo HTHGA C/SIC Tubes using a specialized Laser Dilatometer. 12th European Conference on Spacecraft Structures Materials & Environmental Testing 2012, Noordwijk, 2012 mehr…
  • da Rocha-Schmidt, L.; Hermanutz, A.; Hofheinz, N.; Baier, H.: Formvariable Steuerflächen und deren aeroelastisches Verhalten am Beispiel des Sagitta Demonstrators. Deutscher Luft- und Raumfahrtkongress, 2012 mehr…
  • von Saucken, C.; Schröer, B.; Kain, A.; Lindemann, U.: Customer Experience Interaction Model. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1387-1396 mehr…

2011

  • Antonelli,V.; He,P.; Baier,H.: Challenges in the design of high energy storage flywheels made of composite material. ICCM 18 2011, Korea, 2011 mehr…
  • Antonelli,V.; Wedekind,M.; Krämer,L.; Baier,H.: The Design of a CFRP Chopper Disk for a Time Of Flight Spectrometer. ICCM 18 2011, Korea, 2011 mehr…
  • Baier,H.; Datashvili,L.; Rapp,S.: Smart and Nano Materials for performance enhancement of Space Structures. Int. Conf. on Smart and Nano Materials 2011, Hongkong, 2011 mehr…
  • Baier,H.; Wehrle,R.: Modellierung von Fertigungsaufwänden in der Strukturoptimierung auf Basis qualitativer Informationen – Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen. VDI-Fortschritt-Berichte, 2011, mehr…
  • Behncke, Florian G. H.; Lindemann, Udo: Indicating the criticality of changes during the product life cycle. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Behncke, Florian; Gabriel, Frank; Langer, Stefan; Hepperle, Clemens; Lindemann, U.; Karl, Florian; Pohl, Johannes; Schindler, Sebastian; Gunther, Reinhart; Zaeh, Michael: Analysis of information flows at interfaces between strategic product planning, product development and production planning to support process management - A literature based approach. 2011 IEEE International Conference on Systems, Man and Cybernetics - SMC, 201109.-12.10.2011 mehr…
  • Behncke, Florian; King, Moritz; Lindemann, U.: Educational game concept for the transfer of results from the transdisciplinary research to the new scientific generation. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 201106.-09.12.2011 mehr…
  • Biedermann, Wieland; Diepold, Klaus; Lindemann, Udo: Entscheidungsstrategien zur Festlegung und Priorisierung von Änderungen. Tag des Systems Engineering, Hanser, 201109.-11.11.2011, 141-150 mehr…
  • Biedermann, Wieland; Lindemann, Udo: On the Applicability of Structural Criteria in Complexity Management. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011, 21-32 mehr…
  • Biedermann, Wieland; Lindemann, Udo: Prediction of Communication Structures Based on Product Structures. 13th International DSM Conference, Hanser, 201114.-15.09.2011, 291-300 mehr…
  • Both,J.; Barfuß,D.; Baier,H.: Mode II delamination of CFRP-metal laminates at bolted joints. ICCM 18 2011, Jeju, South Korea, 2011 mehr…
  • Both,J.; Morasch,A.; Baier,H.: Load bearing capacity of hybrid CFRP-metal laminates. SEICO 11 2011, Paris, 2011 mehr…
  • Both,J.; Wehrle,E.; Baier,H.: Werkstoffhybrider Leichtbau - Chancen und Risiken auf dem Weg zur Elektromobilität. Werkstoffforum intelligenter Leichtbau, Hannovermesse 2011, Hannover, 2011 mehr…
  • Daniilidis, Charalampos; Enßlin, Vincent; Eben, Katharina; Lindemann, Udo: A classification framework for product modularization methods. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Daniilidis, Harrys; Hellenbrand, David; Bauer, Wolfgang; Lindemann, Udo: Using Structural Complexity Management for Design Process Driven Modularization. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 201106.-09.12.2011 mehr…
  • Datashvili,L.; Baier,H.: A Nonlinear Numerical Method of Shape Finding of Tensioned Membranes. International Conference on Textile Composites and Inflatable Structures, Structural Membranes 2011, CIMNE 2011, Barcelona, 2011 mehr…
  • Datashvili,L.; Baier,H.; Kuhn,T.; Langer,H.; Apenberg,S.; Wei,B.: A Large Deployable Space Array Antenna: Technology and Functionality Demonstrator. Proc. of ESA Antenna Workshop 2011, Noordwijk, 2011 mehr…
  • Datashvili,L.; Baier,H.; da Rocha-Schmidt,L.; Wei,B.; Endler,S.; Langer,H.: "Large Aperture Antenna Architectures for Space Missions". Proc. of ESA Antenna Workshop 2011, Noordwijk, 2011 mehr…
  • Eben, Katharina; Helten, Katharina; Lindemann, Udo: Product development processes in small and middle-sized enterprises - identification and elimination of inefficiency caused by product variety. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Eberl, Thomas ; Stroph, Ralf ; Pruckner, Alfred: Analyse unterschiedlicher Bedienkonzepte der Fahrzeuglängsführung bei Elektromobilität. 2. Automobiltechnisches Kolloqium München, Verlagsname, 201111.-12.04.2011 mehr…
  • Eberl, Thomas; Jung, Martin; Stroph, Ralf; Pruckner, Alfred: Bedienkonzepte für die Fahrzeuglängsführung bei Elektromobilität. Der Fahrer im 21. Jahrhundert, 201108.-09.11.2011 mehr…
  • Elezi, Fatos; Graebsch, Martin; Hellenbrand, D.; Lindemann, U.: Application of Multi-Domain Matrix Waste Reduction Methodology. International Conference on Research into Design, Research Publishing, 201110-12.01.2011, 514 - 522 mehr…
  • Elezi, Fatos; Pechuan, Alvaro; Langer, S.; Herberg, Arne; Behncke, Florian G. H.; Lindemann, U.: Iteration Management by Identification of Value Stream in Product Development Processes. 13th International DSM Conference, Hanser, 201114.-15.09.2011, 247 - 258 mehr…
  • Elezi, Fatos; Pechuan, Alvaro; Mirson, Alexander; Kortler, Sebastian; Biedermann, Wieland; Lindemann, Udo: Supporting Cycle Management by Structural Analysis of the Organisational Domain in Multi-Project Environment. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Elezi, Fatos; Sharafi, Armin; Mirson, Alexander; Petra, Wolf; Krcmar, Helmut; Lindemann, U.: A Knowledge Discovery in Databases (KDD) Approach for Extracting Causes of Iterations in Engineering Change Orders. ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, ASME, 201128.-31.08.2011 mehr…
  • Friemel,M.; Baier,H.: Verbundvorhaben: Höchstinnovative Satkom-Strukturen mit erhöhten thermischen und elektromagnetischen Eigenschaften (HISST), Schlussbericht zum BMWF Förderkennzeichen 50 YB 0929. BMWF, 2011, mehr…
  • Friemel,M.; Baier,H.; Datashvili,L.: New Experimental Techniques for Mechanical and Thermo-Elastic Characterization of Antenna Reflector Materials and Structures. 33rd ESA Antenna Workshop 2011, Noordwijk, 2011 mehr…
  • Gmeiner, T.; Shea, K.: Development of an ontology for the automatic reconfiguration of a vise-type fixture device. IDETC/CIE 2011, ASME, 201128.-31.08.2011 mehr…
  • Hellenbrand, D.; Kissel, M.; Rohloff, J.; Lindemann, U.: Modellierung und Prognose von Entwicklungs- und Recyclingkosten in frühen Entwicklungsphasen. 22. DfX-Symposium 2011, 2011, 183-194 mehr…
  • Hellenbrand, David; Lindemann, Udo: A Framework for integrated Process Modeling and Planning of mechatronic Products. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Helms, Bergen; Schultheiss, Hansjoerg; Shea, K.: Automated Assignement of Physical Effects to Functions Using Ports Based on Bond Graph. ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, ASME, 201128.-31.08.2011 mehr…
  • Helten, Katharina; Schenkl, Sebastian; Lindemann, Udo: Biologizing Product Development - Results from a Student Project. International Conference on Research into Design, Research Publishing, 201110.-12.01.2011, 27-34 mehr…
  • Helten, Katharina; Spillmann, Miriam; Brandstetter, Duygu; Lindemann, Udo: Teaching Students in Project Management - A Survey from a Project Semester. 13th International Conference on Engineering and Product Design Education - E&PDE2011, The Design Society Institution of Engineering Designers, 2011 mehr…
  • Hepperle, Clemens; Biedermann, Wieland; Böcker, Alexander; Lindemann, Udo: Design for X-guidelines and lifecycle phases with relevance for product planning – an MDM-based approach. 13th International DSM Conference, Hanser, 201114.-15.09.2011, 215-228 mehr…
  • Hepperle, Clemens; Förg, Armin; Mörtl, Markus; Lindemann, Udo: Consideration of goal interrelations in lifecycle-oriented product planning. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Hepperle, Clemens; Orawski, Robert; Langer, Stefan; Mörtl, Markus; Lindemann, Udo: Temporal aspects in lifecycle-oriented planning of product-service-systems. International Conference on Research into Design, Research Publishing, 201110.-12.01.2011, 338 - 346 mehr…
  • Höchtl,F.; Perterer,M.; Kiefmann,A.; Senner,V.; Baier,H.: Influence of curvature on impact damage of strongly curved CFRP-structures. SAMPE TECH 2011 2011, Fort Worth, TX, 2011 mehr…
  • Jorgensen, Rune; Behncke, Florian G. H.: Considering sustainable impacts of suppliers throughout the product life cycle in the pursue of a sustainable vision. International Conference for Product Lifecycle Management, Inderscience Enterprises Ltd., 201111.-13.07.2011, 1-10 mehr…
  • Kain, A.; Kirschner, R.; Lang, A.; Lindemann, U.: Facing the open innovation dilemma - structuring input at the company's border. 18th International Conference on Engineering Design, 201115.-18.08.2011 mehr…
  • Kain, A.; Kirschner, R.; Lindemann, U.: Open Innovation and User Experience: a chance to gain deeper user insights. 13th Conference on Human-Computer Interaction (INTERACT), Workshop User Experience in Cars, 201105.-09.09.11 mehr…
  • Kirschner, R.; Kain, A.; Lang, A.; Lindemann, U.: Immersive product improvement IPI - first empirical results of a new method. 18th International Conference on Engineering Design, 201115.-18.08.2011 mehr…
  • Kissel, M.; Hellenbrand, D.; Lindemann, U.; Schullerus, W.: Robustheitsbewertung von Produktkonzepten in frühen Entwicklungsphasen. Wissenschaftsforum Intelligente Technische Systeme 2011, 201119. - 20.05.2011 mehr…
  • Kissel, Maximilian; Hellenbrand, David; Lindemann, Udo: A Methodology to evaluate the structual Robustness of Produtct Concepts. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Kissel, Maximilian; Hellenbrand, David; Schullerus, Wolfgang; Lindemann, Udo: Robustheitsbewertung von Produktkonzepten in frühen Entwicklungsphasen. 8. Paderborner Workshop Entwurf mechatronsicher Systeme, 201119.-20.05.2011, 133-145 mehr…
  • Kohn, Andreas; Lindemann, Udo: Search for similar technical solutions by object abstraction using an ontology. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Kohn, Andreas; Maurer, Maik; Schmidt, Helena X.; Lindemann, Udo: Use of existing ontologies as input for Structural Complexity Management - Reducing the effort for analysing and improving engineering systems. KEOD 2011 - International Conference on Knowledge Engineering and Ontology Development, 201125. - 30.10.2011 mehr…
  • Kortler, Sebastian; Lindemann, Udo: A Meta Model of the Innovation Process to Support the Decision Making Process Using Structural Complexity Management. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Koukal,A.; Baier,H.; Clausen,A.H.; Seibert,D.: Influence of the fibre content on the mechanical behaviour of polymers for pedestrian protection. 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS) 2011, Valenciennes, 2011 mehr…
  • Krinner, Michael; Elezi, Fatos; Tommelein, Iris; Lindemann, U.: Managing Complexity in Lean Construction Design – Using the MDM Methodology to create organizational Modularity. 13th International DSM Conference, Hanser, 201114.-15.09.2011, 377 - 390 mehr…
  • Kuhn,T.; Langer,H.; Apenberg,S.; Wei,B.; Datashvili,L.: A Very Large Deployable Space Antenna Structure Based on Pantograph Tensioned Membranes. International Conference on Textile Composites and Inflatable Structures, Structural Membranes, CIMNE 2011, Barcelona, 2011 mehr…
  • Lang, A.; Kirschner, R.; Kain, A.; Lindemann, U.: Overcomming the keep the market out premise (KMOP) in product development. 18th International Conference on Engineering Design, 201115.-18.08.2011 mehr…
  • Maier, Anja; Dönmez, Denniz; Hepperle, Clemens; Kreimeyer, Matthias; Lindemann, Udo; Clarkson, John: Improving communication in design: recommendations from the literature. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Maurer, Maik: Systematic Knowledge Transfer based on Knowledge Correlations. International Conference on Research into Design, Research Publishing, 201110.-12.01.2011, 320-328 mehr…
  • Maurer, Maik: Process optimization by DSM-based modelling of inputs and outputs. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Migliorelli,M.; Scialino,L.; Breunig,E.; Ihle,A.; Datashvili,L.; van´t Klooster,K.; Santiago Prowald,J.: Reflector Technology Trade-Off for LDA on Telecom and Earth Observation Applications. Proc. of ESA Antenna Workshop 2011, Noordwijk, 2011 mehr…
  • Morasch,A.; Prievitzer,J.; Baier,H.: Zur ganzheitlichen Bewertung von Werkstoffen am Beispiel von naturfaserverstärkten und glasfaserverstärkten Kunststoffen. 60. Deutscher Luft- und Raumfahrtkongress 2011, Bremen, 2011 mehr…
  • Musiol, Jan; Zaeh, Michael F.; Guertler, Matthias: Contribution on Modeling the Remote Ablation Cutting. ICALEO 2011, Laser Institute of America (LIA pub), 201123.-27.10.2011, 536-546 mehr…
  • Orawski, Robert; Hepperle, Clemens; Mörtl, Markus; Lindemann, Udo: Reoccurring Cyclic Consideration of End-of-Life Requirements During Product Planning. International Conference on Research into Design, Research Publishing, 201110.-12.01.2011, 533 - 540 mehr…
  • Orawski, Robert; Krollmann, Jan; Mörtl, Markus; Lindemann, Udo: Generic Model of the Early Phase of an Innovation Process regarding Different Degrees of Product Novelty. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Parvan, M. I.; Schwalmberger, A.; Lindemann, U.: Application of Basic Design Principles for Solution Search in Biomimetics. 18th International Conference on Engineering Design, 201115.-18.08.2011 mehr…
  • Paulus,D.; Salmon,T.; Mohr,B.; Rößler,C.; Petersson,Ö.; Stroscher,F.; Baier,H.; Hornung,M.: Configuration selection for a 450 passenger ultra-efficient 2020 aircraft. 4th European Conference for Aerospace Sciences (EUCASS) 2011, St. Petersburg, 2011 mehr…
  • Perterer,M.; Baier,H.; Höchtl,F.: Comparison of a Cost-Effective Phase Based Thermography Method with Ultrasonic Investigation of Defects in CFRP Structures. SAMPE TECH 2011 2011, Fort Worth, TX, 2011 mehr…
  • Perterer,M.; Höchtl,F.; Kiefmann,A.; Baier,H.; Senner,V.: Cost-Effective Phase-Modulated Thermography for Damage Inspection of Flat and Strongly Curved CFRP Structures. 2nd Innovative International Composites Summit (I.I.C.S) 2011, Paris, 2011 mehr…
  • Perterer,M.; Höchtl,F.; Kiefmann,A.; Baier,H.; Senner,V.: Kosteneffiziente phasenmodulierte Thermographie zur Schadensdetektion an flachen und stark gekrümmten Bauteilen aus CFK. DGZfP-Jahrestagung 2011, Berichtsband 127-CD 2011, Bremen, 2011 mehr…
  • Perterer,M.; Wedekind,M.; BaierH.: Imperfektionsbewertung von Faserverbund-Metallstrukturen mit zerstörungsfreien Prüfverfahren. Proceedings: Deutscher Luft- und Raumfahrtkongress, p. 655-661, 2011, Bremen, 2011 mehr…
  • Petersson,Ö.; Baier,H.: Multidisciplinary optimization of aircraft structures subject to dynamic aeroelastic loads, including a linear load alleviation system. 15th International Forum on Aeroelasticity and Structural Dynamics (IFASD) 2011, Paris, 2011 mehr…
  • Rapp,S.; Baier,H.: Shape Memory Polymer Actuator Patches for Shape Adjustment of Fiber Composite Parts. 19th AIAA/ASME/AHS Adaptive Structures Conference 2011, Denver, 2011 mehr…
  • Reinicke,G.; Baier,H.: Active Vibration Control of Large Satellite Solar Array Panels with Regional Mode Shapes. 14th International Adaptronic Congress 2011, Darmstadt, 2011 mehr…
  • Reinicke,G.; Baier,H.;: An alternative method to evaluate the effect of piezoelectric patch actuators bonded to flexible structures. 22nd International Conference on Adaptive Structures and Technologies 2011, Corfu, Greece, 2011 mehr…
  • Schenkl, Sebastian A.; Orawski, Robert; Elezi, Fatos; Lindemann, Udo: Towards a Lifecycle-oriented Planning of a Platform Portfolio. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 201106.-09.12.2011, 714 - 718 mehr…
  • Schenkl, Sebastian; Kaiser, Katharina; Lindemann, Udo: A Framework for Bottom-Up Biomimetics. 1st International Bionic Engineering Conference, 201118.-20.09.2011 mehr…
  • Schmidt, Helena X.; Kohn, Andreas; Lindemann, Udo: Domain Specific Language in Technical Solution Documents - Discussion of two Approaches to Improve the Semi-automated Annotation. KEOD 2011 - International Conference on Knowledge Engineering and Ontology Development, 201125. - 30.10.2011 mehr…
  • Schmitz, Steffen; Wynn, David C.; Biedermann, Wieland; Lindemann, Udo; Clarkson, P. John: Improving Data Quality in DSM Modelling: A Structural Comparison Approach. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011, 319-328 mehr…
  • Schrieverhoff, Phillip; Jorgensen, Rune; Lindemann, Udo: Resource and Cost Oriented Innovation Steering in Sustainable Product Design. Eco Design 2011, 201130.11.-02.12.2011 mehr…
  • Schrieverhoff, Phillip; Jorgensen, Rune; Lindemann, Udo: TRIZ as Innovation Driver in Sustainable Product Design. TRIZ Future 2011, 201102.-04.11.2011 mehr…
  • Schröer, Bernd; Lindemann, Udo: Concretization of User-Representation: Modeling User Action as Part of a Product Solution. 4th World Conference on Design Research, IASDR 2011, International Association of Societies of Design Research, 201131.10.-04.11.2011 mehr…
  • Schröer, Bernd; Löhmann, Sebastian; Lindemann, Udo: Creating User Experience by novel Interaction Forms: (Re)combining Actions and Technologies. 13th Conference on Human-Computer Interaction (INTERACT), Workshop User Experience in Cars, 201105.-09.09.2011 mehr…
  • Schütz, D.; Schraufstetter, M.; Folmer, J.; Vogel-Heuser, B.; Gmeiner, T.; Shea, K.: Highly reconfigurable production systems controlled by real-time agents. 16th Conference on Emerging Technologies & Factory Automation (ETFA), 20115-9 Sept. 2011, 1-8 mehr…
  • Seibert,D.; Koukal,A.: Pedestrian protection and its implications on front-ends. International Conference Automotive Front-End 2011, Wiesbaden, 2011 mehr…
  • Sop Njindam, Thierry; Metzler, Torsten; Paetzold, Kristin; Shea, Kristina: Integrating Failure Analysis into the Conceptual Design of Cognitive Products: Towards a New Paradigm. Symposium Design for X 2011, 201111.-12.10.2011, 1-18 mehr…
  • Wehrle,E.; Both,J.; Wehrle,R.; Baier,H.: Entwurfsoptimierung einer werkstoffhybriden Karosserie für Elektrofahrzeuge. Leichtbau-Colloquium 2011, Landshut, 2011 mehr…
  • Wehrle,E.; Huber,M.; Baier,H.: Entwurfsoptimierung leichter Tragwerksstrukturen unter Berücksichtigung von Fertigungsaufwand und -abweichungen. VDI, Fortschrittsberichte VDI Reihe 2, Nr. 678, S. 319-338 2011, , 2011, mehr…
  • Wehrle,E.; Wedekind,M.; Baier,H.;: Fuzzy modeling of imprecise material parameters in the analysis of metal matrix composite structures. ASME International Mechanical Engineering Congress & Exposition 2011, Denver, 2011 mehr…
  • Wildschek, A.; Hanis, T.; Stroscher, F.: L-infinity-Optimal Feed-forward Gust Load Alleviatkion Design for a large Blended Wing Body Airliner. EUCASS, 2011 mehr…
  • Wölkl, S.; Shea, K.: Modellbibliotheken für die Funktions- und Komponentenmodellierung in der Konzeptentwicklung mit SysML. 8. Paderborner Workshop Entwurf Mechatronischer Systeme, HNI-Verlagsschriftenreihe, 201119.-20-05.2011 mehr…
  • Zaeh, Michael F.; Reinhart, Gunther; Lindemann, Udo; Karl, Florian; Biedermann, Wieland: DSM-based Evaluation of Assembly Manufacturing Resources. 13th International DSM Conference, Hanser, 201114.-15.09.2011, 291-300 mehr…
  • Zhang,Y.; Baier,H.: Optimal Parts Allocation for Structural Systems Via Improved Initial Solution Generation. VII. ALIO / EURO Workshop on Applied Combinatorial Optimization 2011, Porto, Portugal, 2011 mehr…
  • von Saucken, Constantin; Schröer, Bernd; Lindemann, Udo: Industrial Designers and Engineers in Product Development. Conflicts and Approaches for Improving Collaboration. 4th World Conference on Design Research, IASDR 2011, International Association of Societies of Design Research, 201131.10.-04.11.2011 mehr…

2010

  • Antonelli,V.; Marissen,R.: FE-Modelling of the rubber mould behaviour during press forming of thermoplastic composites. 13th ESAFORM 2010 conference on material forming 2010, Brescia, 2010 mehr…
  • Baier,H.; Datashvili,L.: Shape morphing and control of flexible surfaces for aerospace applications. Conf. European Aeronautic Science Network 2010, Paris, 2010 mehr…
  • Biedermann, Wieland; Diepold, Klaus J.; Lindemann, Udo: Modellabstufungen zur Betrachtung struktureller und dynamischer Komplexität. Tag des Systems Engineering, Hanser, 201010.-12.11.2010, 97-108 mehr…
  • Biedermann, Wieland; Strelkow, Ben; Karl, Florian; Lindemann, Udo; Zaeh, Michael F.: Reducing Data Acquisition Effort by Hierarchical System Modelling. 12th International DSM Conference, Hanser, 201022.-23.07.2010, 309-318 mehr…
  • Daniilidis, Charalampos; Eben, Katharina; Deubzer, Frank; Lindemann, Udo: Simultaneous modularization and platform identification of product family variants. 8th NordDesign Conference, Chalmers University of Technology, 201025.–27.08.2010 mehr…
  • Datashvili,L.; Baier,H.; Wehrle,E.; Kuhn,T.; Hoffmann,J.: Large Shell-Membrane Space Reflectors. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 12 - 15 April 2010 2010, Orlando, Florida, USA, 2010 mehr…
  • Datashvili,L.; Baier,H.; Wei,B.; Hoffmann,J.; Wehrle,E.; Schreider,L.; Mangenot,C.; Santiago-Prowald,J.; Scolamiero,L.; Angevain,J.-C.: "Mechanical Investigations of in-space-Reconfigurable Reflecting Surfaces ",. ESA Antenna Workshop 2010, Noordwijk, 2010 mehr…
  • Diepold, Klaus J.; Biedermann, Wieland; Eben, Katharina G. M.; Kortler, Sebastian; Lohmann, Boris; Lindemann, Udo: Combining Structural Complexity Management and Hybrid Dynamical System Modelling. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010, 1045-1054 mehr…
  • Eben, Katharina; Daniilidis, Charalampos; Lindemann, Udo: Interrelating and prioritising requirements on multiple hierarchy levels. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010, 1055 - 1064 mehr…
  • Eben, Katharina; Lindemann, Udo: Structural analysis of requirements - interpretation of structural criterions. 12th International DSM Conference, Hanser, 201022.-23.07.2010, 249-261 mehr…
  • Furtmeier, Fabian; Graebsch, Martin; Elezi, Fatos; Tommelein, Iris; Lindemann, Udo: MDM as a Process Mapping Tool in Lean Construction. 12th International DSM Conference, Hanser, 201022.-23.07.2010 mehr…
  • Gorbea, Carlos; Hellenbrand, David; Srivastava, T.; Biedermann, Wieland; Lindemann, Udo: Combatibility Matrix Methodology applied to the identification of vehicle architectures and design requirements. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Hellenbrand, David; Daniilidis, Charalampos; Lindemann, Udo: Integrierte funktionsorientierte Produkt- und Prozessmodellierung mechatronischer Produkte. 7. Paderborner Workshop - Entwurf mechatronischer Systeme, Heinz Nixdorf Institut, 201018.-19.03.2010, 39-52 mehr…
  • Hellenbrand, David; Helten, Katharina; Lindemann, Udo: Approach for development cost estimation in early design phases. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Helms, Bergen; Shea, Kristina: Object-oriented concepts for computational design synthesis. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Helms, Bergen; Shea, Kristina: booggie - an object-oriented graph-grammar implementation for engineering design synthesis. Fourth International Conference on Design Computing and Cognition DCC'10, Springer, 201012.-14.07.2010 mehr…
  • Hepperle, Clemens; Bradford, Nikolas; Costantino, Francesco; Orawski, Robert; Langer, Stefan; Lindemann, Udo: Calculating lifecycle interdependencies based on Eco-Design strategies. IEEE IEEM 2010 - Industrial Engineering and Engineering Management, 201007.-10.12.2010, 743 - 747 mehr…
  • Hepperle, Clemens; Langer, Stefan; Scherer, Anne; Schwetz, Philipp; Lindemann, Udo: Consideration of factors influencing the time of launching new products. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010, 1099-1108 mehr…
  • Herberg, Arne; Langer, Stefan; Lindemann, Udo: Characterizing triggers of reactive cycles within design processes based on process observation. IEEE IEEM 2010 - Industrial Engineering and Engineering Management, 201007.-10.12.2010, 478 - 482 mehr…
  • Höchtl,F.; Perterer,M.; Kiefmann,A.; Senner,V.; Baier,H.: Steinschläge und Co. – Impactproblematik von CFK-Strukturen im Fahrradbau. 1. Fahrradentwickler Conference: Leichtbau, Strukturen und Komponenten 2010, München, 2010 mehr…
  • Jowers, I.; Prats, M.; Eissa, H.; Lee, J.: A Study of Emergence in the Generation of Islamic Geometric Patterns. New Frontiers: Proceedings of the 15th International Conference on Computer-Aided Architectural Design Research in Asia, CAADRIA, 20107.-10.04.2010, 39–48 mehr…
  • Kain, Andreas; Kirschner, Rafael; Gorbea, Carlos; Kain, Tatiana; Gunkel, Jennifer; Klendauer, Ruth; Lindemann, Udo: An approach to discover innovation potential by means of delta applications. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Kirschner, Rafael; Kain, Andreas; Fischer, Jan; Gunkel, Jennifer; Klendauer, Ruth; Lang, Alexander; Lindemann, Udo: An approach to support the selection of customer integration methods in new product development. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Kohn, Andreas; Lindemann, Udo: Approach towards a more flexible handling of domains in complex systems. 12th International DSM Conference, Hanser, 201022.-23.07.2010, 249-261 mehr…
  • Kohn, Andreas; Peter, Gerhard; Lindemann, Udo: The Challenge of automatically annotating solution documents. KEOD 2010 - International Conference on Knowledge Engineering and Ontology Development, INSTICC Press, 201025.-28.10.2010 mehr…
  • Kortler, Sebastian; Diepold, Klaus Jürgen; Lindemann, Udo: Structural Complexity Management using domain-spanning structural criteria. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Kortler, Sebastian; Helms, Bergen; Berkovich, Marina; Lindemann, Udo; Shea, Kristina; Leimeister, Jan Marco; Krcmar, Helmut: Using MDM-Methods in order to improve managing of iterations in design processes. 12th International DSM Conference, Hanser, 201022.-23.07.2010, 125-138 mehr…
  • Kuhn,T.; Baier,H.: "Multidisciplinary modeling approaches for membrane structures in aerospace applications". 13th AIAA/ISSMO Multidisciplinary Analysis Optimization (MAO) Conference, 13-15 September 2010, Fort Worth, Texas, USA, 2010 mehr…
  • Langer, Stefan; Herberg, Arne; Körber, Klaus; Lindemann, Udo: Development of an Explanatory Model of Cycles within Development Processes by Integrating Process and Context Perspective. IEEE IEEM 2010 - Industrial Engineering and Engineering Management, 201007.-10.12.2010, 1796 - 1800 mehr…
  • Langer, Stefan; Knoblinger, Christoph; Lindemann, Udo: Analysis of dynamic changes and iterations in the development process of an electrically powered go-kart. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Lederer, Sebastian; Marle, Franck; Hepperle, Clemens; Lindemann, Udo: Analysis of decision-making processes in the development of complex solutions. 12th International DSM Conference, Hanser, 201022.-23.07.2010, 45-53 mehr…
  • Maurer, M.; Kesper, H.: Knowledge transfer applying the structural Complexity Management approach. International Conference on Information Retrieval & Knowledge Management (CAMP’10), 201017.- 8.03.2010 mehr…
  • Müller,U.C.; Both,J.; Roths,J.; Baier,H.: High-Precision Thermal Strain Measurements Using Sufface-Mounted Fiber Bragg Grating Sensors. SPIE Smart Structures/NDE 2010, San Diego, 2010 mehr…
  • Orawski, Robert; Hepperle, Clemens; Mörtl, Markus; Lindemann, Udo: A framework for a product-service-system portfolio: managing the early planning. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010, 371 - 380 mehr…
  • Orawski, Robert; Hepperle, Clemens; Mörtl, Markus; Lindemann, Udo: Matching product flexibility on the integrated portfolio of a product-service-system. 2nd CIRP Industrial Product-Service Systems Conference, Linköping University 2010, 201013.-17.04.2010, 269 - 274 mehr…
  • Parvan, M.; Maurer, M.; Lindemann, U.: Software wizard design for complexity management application. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010, 1-10 mehr…
  • Perterer,M.; Höchtl,F.; Kiefmann,A.; Baier,H.; Senner,V.: Ultrasonic And Thermographic Monitoring of Impact induced damage of CFRP Structures. SAMPE 2010 Spring Conference 2010, Seattle, 2010 mehr…
  • Perterer,M.; Kuhn,T.; Baier,H.: Konstruktions- und Prüfverfahren zur ganzheitlichen Entwicklung und Bewertung von Luftschiffstrukturen. DGLR Workshop XII - Luftfahrzeuge leichter als Luft 2010, Bremen, 2010 mehr…
  • Petermann, Markus; Meiwald, Thomas; Lindemann, Udo: Share it or not? – A framework for the transfer of product creation knowledge. 8th NordDesign Conference, Chalmers University of Technology, 201024.-27.8.2010 mehr…
  • Petermann, Markus; Meiwald, Thomas; Lindemann, Udo: Transferring knowledge of product creation - motivations and consequences. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Petersson,Ö.; Leitner,M.; Stroscher,F.: Structural optimization framework for aircraft subject to transient maneuver and gust loads. 13th AIAA / ISSMO Multidisciplinary Analysis and Optimization Conference 2010, Fort Worth TX, 2010 mehr…
  • Petersson,Ö.; Stroscher,F.; Baier,H.: Multidisciplinary Optimisation of Aircraft Wings including gust loads. 2nd RAeS Aircraft Structural Design Conference 2010, London , 2010 mehr…
  • Reinicke,G.; Yoo,E.; Baier,H.: Active Vibration Damping of large Satellite Solar Array Panels. 21st International Conference on Adaptive Structures and Technologies 2010, Pennsylvania, USA, 2010 mehr…
  • Roelofsen, Julia; Lindemann, Udo: A framework for situation specific planning of product development processes. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Rössler,C.; Schömann,J.; Baier,H.: Aerospace application of hydrogen and fuel cells. 18th World Hydrogen Conference 2010, Essen, 2010 mehr…
  • Schenkl, Sebastian; Kissel, Maximilian; Hepperle, Clemens; Lindemann, Udo: Communication paths in biomimetic design – supporting a model-based interdisciplinary information transfer. 8th NordDesign Conference, Chalmers University of Technology, 201025.-27.08.2010, 499-506 mehr…
  • Schreider,L.; Faro,I.; Depeyre,S.; Belloeil,V.; Datashvili,L.; Baier,H.; Hoffmann,J.; Wei,B.: Potential Membrane Technologies for in Orbit Reconfigurable Reflector. ESA Antenna Workshop 2010, Noordwijk, 2010 mehr…
  • Schröer, Bernd; Herberg, Arne; Daniilidis, Charalampos; Frackenpohl, Thorsten; Lindemann, Udo: Bringing together ID and ED education. 12th International Conference on Engineering and Product Design Education, The Design Society, 201002.-03.09.2010 mehr…
  • Schröer, Bernd; Kain, Andreas; Lindemann, Udo: Supporting creativity in conceptual design: Method 635-extended. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Schröer, Bernd; Lindemann, Udo: Industrial Design Engineering an der TU München. 4. Symposium Technisches Design Dresden, TUDpress, 201024.-25.09.2010, 291-309 mehr…
  • Steinhauer, Markus; Shea, Kristina: Efficient Design Space Exploration and Optimization of PHEV Architectures. Design for X, Beiträge zum 21. DfX-Symposium, TuTech Verlag, 2010, 247-258 mehr…
  • Stroscher,F.; Petersson,Ö.; Leitner,M.: "Aircraft Structural Optimization Subject to Flight Loads: Application to a Wide Body Commercial Aircraft Configuration". 1. EASN Workshop on Aerostructures 2010, Paris, 2010 mehr…
  • Wildschek,A.; Stroscher,F.; Klimmek,T.: Gust load alleviation on a large blended wing body airliner. 27th International Congress of the Aeronautical Sciences 2010, , 2010 mehr…
  • Wittmann,J.; Hornung,M.; Baier,H.: Mission performance optimization via morphing wing tip devices. Proc. DGLR-Jahrestagung 2010, Hamburg, 2010 mehr…

2009

  • Antonelli,V.; Carbone,R.; Lindstedt,S.; Marissen,R.: Pressure distibution and surface quality during forming of thermoplastic composites with a collection of rubber particles as mould half. 17th International Conference on Composite Material ICCM 2009, Edinburgh, 2009 mehr…
  • Antonelli,V.; Decoster,D.; Carbone,R.; Marissen,R.: The Influence of Rubber Properties During Hylid Forming. SAMPE Europe Conference, 23.-25.3. 2009, Paris, 2009 mehr…
  • Baier,H.; Datashvili,L.; Hoffmann,J.; Kuhn,T.: Large Membrane Space Reflectors. International Conference on Textile Composites and Inflatable Structures (Structural Membranes 2009), 05 - 07. Oktober 2009, Stuttgart, 2009 mehr…
  • Baier,H.; Datashvili,L.; Rapp,S.: Enhancing space satellite performance by integrating smart sensors and actuators for sensing and shape morphing. 2nd International Conference on Smart Materials and Nanotechnology in Engineering (8.-11.7.) 2009, Weihai, China, 2009 mehr…
  • Baier,H.; Datashvili,L.; Rapp,S.; Hoffmann,J.: "Shape Morphing and Contol of Flexible Surfaces for Aerospace Applications". International Scientific Conference on Advanced Lightweight Structures and Reflector Antennas, 14 - 16 Oktober 2009, Tbilisi, Georgien, 2009 mehr…
  • Biedermann, Wieland; Kreimeyer, Matthias; Lindemann, Udo: Measurement System to Improve Data Acquisition Workshops. 11th International DSM Conference, Hanser, 200912.-13.10.2009, 119-130 mehr…
  • Both,J.; Wedekind,M.; Baier,H.: Computational and Experimentel Characterization of Laminated and Extruded Metal-CFRP Composite Materials and Components. EUCOMAS 2009, Augsburg, 2009 mehr…
  • Braun, Stefanie C.; Lindemann, Udo: Der Zusammenhang zwischen Komplexität und Kosten als Basis von Handlungsanweisungen zur kostenoptimierten Gestaltung mechatronischer Produkte. 6. Paderborner Workshop - Entwurf mechatronischer Systeme, Heinz Nixdorf Institut, 200902.-03.04.2009, 351-366 mehr…
  • Carbone, R.; Antonelli, V.; Langella, A.; Marissen, R.: Numerical Study for Rubber Particles Collection Involvend in New Thermoforming Composite Process Using Comsol Multiphysics. Comsol User Conference, 2009 mehr…
  • Carbone,R.; Antonelli,V.; Langella,A.; Marissen,R.: Numerical Study for Rubber Particles Collection Involved in New Thermoforming Composite Process Using Comsol Multiphysics. Comsol User Conference (14.-15.10.) 2009, Milan, 2009 mehr…
  • Daniilidis, Charalampos; Eben, Katharina; Lindemann, Udo: A functional analysis approach for product reengineering. TRIZfuture Conference 2009, Editura Politehnica, 2009 mehr…
  • Datashvili,L.: Review and Evaluation of the Existing Designs / Technologies for Space Large Deployable Apertures. International Scientific Conference on Advanced Lightweight Structures and Reflector Antennas, 14 - 16 Oktober 2009, Tbilisi, Georgien, 2009 mehr…
  • Datashvili,L.; Baier,H.: Space Applicable Antenna Reflectors with Flexible Shell-membrane Reflecting Surface. International Scientific Conference on Advanced Lightweight Structures and Reflector Antennas, 14 - 16 Oktober 2009, Tbilisi, Georgien, 2009 mehr…
  • Datashvili,L; Baier,H.: Large Membrane Reflectors. 3rd European Conference on Antennas and Propagation - EuCAP (23.-27.3.) 2009, Berlin, 2009 mehr…
  • Diepold, Klaus Jürgen; Winkler, Franz; Lohmann, Boris; Kortler, Sebastian: A Framework for DSM-Based Pre-Modelling Analysis of Complex Systems. 11th International DSM Conference, Hanser, 200912.-13.10.2009, 27 - 39 mehr…
  • Eben, Katharina; Daniilidis, Charalampos; Lindemann, Udo: Problem solving for multiple product variants. TRIZfuture Conference 2009, Editura Politehnica, 2009, 54-61 mehr…
  • Ertelt, Christoph; Gmeiner, Thomas; Shea, Kristina: A Flexible Fixture and Reconfiguration Process for the Cognitive Machine Shop. 3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2009), 200905.-07.10.2009 mehr…
  • Ertelt, Christoph; Rühr, Thomas; Pangercic, Dejan; Shea, Kristina; Beetz, Michael: Integration of Perception, Global Planning and Local Planning in the Manufacturing Domain. 14th IEEE International Conference on Emerging Technologies and Factory Automation, 200922.-26.09.2009 mehr…
  • Franke, S.; Kirschner, R.; Kain, A.; Becker, I.; Lindemann, U.: Managing early phases of innovation processes and the use of methods within - empirical results from an industry survey. 17th International Conference on Engineering Design, 200924.-27.08.2009 mehr…
  • Gaag, Andreas; Kohn, Andreas; Lindemann, Udo: Function-based Solution Retrieval and Semantic Search in Mechanical Engineering. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009 mehr…
  • Gogava,Z.; Medzmariashvili,E.; Baier,H.; Tan,H.; Griebel,H.;: Space Deployable Parabolic Antenna-Solar Concentrator. International Scientific Conference on Advanced Lightweight Structures and Reflector Antennas, 14 - 16 Oktober 2009, Tbilisi, Georgien, 2009 mehr…
  • Gorbea, C.; Fricke, E.; Lindemann, U.: Life Cycle Cost Modeling of Hybrid Vehicles During Early Product Architecture Development. ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, ASME, 200930.08.-02.09.2009 mehr…
  • Gorbea, C.; Lindemann, U.; Fricke, E.: Innovation and Vehicle Architecture Development in A New Age of Architectural Competition. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009 mehr…
  • Graebsch, Martin; Deubzer; Frank; Lindemann, Udo: Graph Representation of Physical Effects Networks in Conceptual Design. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009, Seitenzahlen von - bis mehr…
  • Gürtler, Matthias; Kreimeyer, Matthias; Lindemann, Udo: Extending the Active / Passive Sum Measure to Include Boolean Operators: A Case Study. 11th International DSM Conference, Hanser, 200912.-13.10.2009, 79-92 mehr…
  • Helms, Bergen; Eben, Katharina; Shea, Kristina; Lindemann, Udo: Graph Grammars - A Formal Method for Dynamic Structure Transformation. 11th International DSM Conference, Hanser, 200912.-13.10.2009, 93-103 mehr…
  • Helms, Bergen; Shea, Kristina; Hoisl, Frank: A Framework for Computational Design Synthesis Based on Graph-Grammars and Function-Behavior-Structure. ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 200930.08.-02.09.2009 mehr…
  • Helten, Katharina; Hellenbrand, David; Lindemann, Udo: Robust Product Concepts - An Approach to Assess Concept Suitability for Production in Early Design Phases. 3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2009), 200905.-27.10.2009, 498-507 mehr…
  • Hepperle, Clemens; Eben, Katharina; Lindemann, Udo: Elements and ways of integrated product development education - current and future challenges. 11th International Conference on Engineering and Product Design Education (EPDE), 200910.-11.11.2009 mehr…
  • Hepperle, Clemens; Thanner, Stefan; Mörtl, Markus; Lindemann, Udo: An integrated product lifecycle model and interrelations in-between the lifecycle phases. 6th International Conference on Product Lifecycle Management, Inderscience Enterprises Ltd., 200906.-08.07.2009 mehr…
  • Hoisl, Frank: Integrating Computer Aided Design and Shape Grammars for Computational Design Synthesis. forum 3D 2009 3D-Technologien an der Technischen Universität München, Shaker Verlag, 200902.04.2009, 93 - 104 mehr…
  • Hoisl, Frank; Shea, Kristina: Exploring the Integration of Spatial Grammars and Open-Source CAD Systems. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009, 6-427 - 6-438 mehr…
  • Huber,M.; Wehrle,E.; Baier,H.: Entwurfsoptimierung. Fortschrittsberichte VDI Reihe 2, Nr. 668, S. 257-274 2009, Düsseldorf, 2009, mehr…
  • Ihle,A.; Ernst,T.; Baier,H.; Datashvili,L.; Hoffmann,J.; Göransson,P.; Fasold,D.; Portela,P.; Santos,M.; Santiago-Prowald,J.: Large Porous Antenna and Spacecraft Structures: Themo-Elastic and Vibro-Acoustic Modelling and Verification Via Tests. 11th European Spacecraft Structures, Materials and Mechanical Testing Conference (ESSMMT), 15.-17.09. 2009, Toulouse, 2009 mehr…
  • Kain, A.; Gaag, A.; Lindemann, U.; Roesch, O.; Bonin, T.; Zaeh, F. M.: Matrix-based product representation to support flexible multibody simulation. ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference(IDETC/CIE 2009), 200930.08.-02.09.2009 mehr…
  • Kain, A.; Kirschner, R.; Lindemann, U.; Gunkel, J.; Klendauer, R.; Schneider, M.; Wastian, M.: Innovation networks – approaches to derive participants and relations systematically. 17th International Conference on Engineering Design, 200924.-27.08.2009 mehr…
  • Kain, Andreas; Kirschner, Rafael; Goldt, Mathias; Lindemann, Udo; Gunkel, Jennifer; Klendauer, Ruth; Schneider, Michael; Wastian, Monika: A method to identify relevant stakeholders to be integrated in New Product Development processes. Research into Design, supporting multiple facets of product development, Research Publishing Service, 200907.-09.01.2009 mehr…
  • Kirschner, Rafael; Kain, Andreas; Lindemann, Udo; Gunkel, Jennifer; Klendauer, Ruth; Schneider, Michael; Wastian, Monika: An approach to identify optimal phases of NPD processes to integrate stakeholders. Research into Design, supporting multiple facets of product development, Research Publishing Service, 200907.-09.01.2009 mehr…
  • Kohn, Andreas; Lindemann, Udo: Combination of algorithms and visualization techniques considering user requirements - a case study. 11th International DSM Conference, Hanser, 200912.-13.10.2009, 207-220 mehr…
  • Krehmer, Hartmut; Eckstein, Raiko; Lauer, Wolfgang; Roelofsen, Julia; Stöber, Christina; Troll, Alexander; Weber, Nadine; Zapf, Jochen: Coping With Multidisciplinary Product Development - A Process Model Approach. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009, 1-241 - 1-252 mehr…
  • Kreimeyer, Matthias: The New Community Portal DSMweb.org. 11th International DSM Conference, Hanser, 200912.-13.10.2009, 9-12 mehr…
  • Kreimeyer, Matthias; Braun, Stefanie; Gürtler, Matthias; Lindemann, Udo: Extending Multiple Domain Matrices to Allow for the Modeling of Boolean Operators in Process Models. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009, 1-12 mehr…
  • Kuhn,T.; Baier,H.; Datashvili,L.: Charcterization of Membranes for Multidisciplinary Modeling Approaches. International Scientific Conference on Advanced Lightweight Structures and Reflector Antennas, 14 - 16 Oktober 2009, Tbilisi, Georgien, 2009 mehr…
  • Lauer, Wolfgang; Lindemann, Udo: Dynamic Linking And Retrieval Of Product Models To Product Development Processes. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009, 8-31 - 8-42 mehr…
  • Maurer, M.; Biedermann, W.; Cole, M.; D’Avanzo, J.; Dickmanns, D.: Airport security: From single threat aspects to valid scenarios and risk assessment. 1st Annual Global Conference on Systems and Enterprises (GCSE), 200903.-04.12.2009 mehr…
  • Maurer, M.; Klinger, H.; Benz, A.: Applying the Structural Complexity Management to knowledge transfer in small and medium-sized companies. First International Conference on Innovation through Knowledge Transfer, Research with Impact, InnovationKT’09, 200902.12.2009 mehr…
  • Maurer, Maik; Biedermann, Wieland; Kuhlmann, Andreas; Braun, Thomas: The 2-tupel-constraint and how to overcome it. 11th International DSM Conference, Hanser, 200912.-13.10.2009 mehr…
  • Maurer, Maik; Braun, Thomas; Lindemann, Udo: Information visualization for the Structural Complexity Management Approach. 19th Annual International Symposium of INCOSE, INCOSE, 200920.-23.07.2009 mehr…
  • Perterer,M.; Höchtl,F.; Blümel,M.; Kiefmann,A.; Baier,H.; Senner,V.;: Einsatzmöglichkeiten von kosteneffizienten Zerstörungsfreien Prüfmethoden (ZfP) am Beispiel CFK-Fahrradrahmen. DVM Workshop - Prüfverfahren und Qualitätssicherungsmethoden unter Berücksichtigung von CFK-Werkstoffen 2009, Berlin, 2009 mehr…
  • Perterer,M.; Kuhn,T.; Baier,H.: Aktive Thermographie zur Fehleridentifikation an Luftschiffstrukturen. DGLR Workshop XI - Luftfahrzeuge leichter als Luft 2009, Friedrichshafen, 2009 mehr…
  • Petermann, Markus; Meiwald, Thomas; Lindemann, Udo: Decision Support for the Selection of Anti-Counterfeiting Measures Based on Modeling Damage Functions. 17th International Conference on Engineering Design, 200924.-27.08.2009 mehr…
  • Petersson,Ö.: Optimization of aircraft wings including dynamic aeroelasticity and manufacturing aspects. 5th AIAA Multidisciplinary Design Optimization Specialist Conference (4.-7.5.) 2009, Palm Springs CA, 2009 mehr…
  • Rapp,S.; Baier,H.: "Reconstruction of Temperature and Displacement Fields in Satellite Sandwich Panels based on Integrated Fiber Optic Sensors". Smart Structures and Materials 2009, San Diego, 2009 mehr…
  • Rapp,S.; Baier,H.; Zuknik,K.-H.; Reutlinger,A.: "Temperature Monitoring in Satellite Sandwich Panels using Integrated Fiber Optic Sensors. ESA workshop on Fiber Optic Sensors for Space Application, Poster Presentation, 17.-19.07. 2009, Noordwijk, NL, 2009 mehr…
  • Roose,S.; Stockman,Y.; Rochus,P.; Kuhn,T.; Lang,M.; Baier,H.; Langlois,S.; Casarosa,G.: Optical methods for non contact measurements of membranes. Acta Astronautica, Vol. 65, Num 9-10, Nov. - Dez. 2009 , PP 1317-1329 (online: 10.1016/j.actaastro.2009.03.061), Elsevier 2009,, 2009 mehr…
  • Scharfenberger, C.; Daniilidis, C.; Fischer, M.; Hellenbrand, D.; Kuhl, P.; Richter, C.; Sabbah, O.; Strolz, M.; Färber, G.: Multidisziplinäre Entwicklung von neuen Türkonzepten als ein Teil einer ergonomisch optimierten Ein-/Ausstiegsunterstützung. OEM Forum Fahrzeugtüren und -klappen 2009, VDI-Verlag, 200913.-14.05.2009, 65 - 80 mehr…
  • Schröer, Bernd; Lindemann, Udo: Efficient Sport Product Development for Small Markets. 4th Asia Pacific Congress on Sports Technology, APCST 2009, RMIT University, Melbourne, Victoria 3000, Australia, 200921.09. - 23.09.2009, 441-446 mehr…
  • Stankovic, Tino; Shea, Kristina; Storga, Mario; Marjanovic, Dorian: Grammatical Evolution of Technical Processes. ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, 200930.08.-02.11.2009 mehr…
  • Stowe, Harold; Browning, Tyson; Maurer, Maik: The Real World does not like Complexity, but... 11th International DSM Conference, Hanser, 200912.-13.10.2009 mehr…
  • Stroscher, F.; Petersson, Ö.; Leitner, M.: Aeroelastische und ordnungsreduzierte Simulationsmodelle für Strukturoptimierung und Reglersimulation flexibler Flugzeug. Deutscher Luft- und Raumfahrtkongress, 2009 mehr…
  • Van't Klooster,K.; Medzmariashvili,E.; Tserodze,S.; Datashvili,L.; Tsignadze,N.: Large Deployable Reflector Configuration for Spacebased Applications in Telecommunications, Science, and Remote Sensing. International Scientific Conference on Advanced Lightweight Structures and Reflector Antennas, 14 - 16 Oktober 2009, Tbilisi, Georgien, 2009 mehr…
  • Watty, Robert; Kreimeyer, Matthias: Assessment of Theses - A Comparison of Current Approaches Practiced in Engineering Education. International Conference on Engineering and Product Design Education, The Design Society, 200910.-11.11.2009 mehr…
  • Wedekind,M.; Baier,H.: Modellierung und Identifikation von Steifigkeit und Festigkeit orthotroper Verbundprofile. VDI, 2009, mehr…
  • Wölkl, Stefan; Shea, Kristina: A Computational Product Model for Conceptual Design Using SysML. ASME 2009 International Design Engineering Technical Conferences, Verlagsname, 200930.08.-02.09.2009, Seitenzahlen von - bis mehr…

2008

  • Abuosba, M.; Gaag, A.; Franz, J.: Semantic Knowledge Management – Erschließung von Lösungswissen in der Automatisierungsindustrie. KnowTech 2008: Erhöhen Sie Ihren BQ*, CMP-WEKA, 200808-09. Oktober 2008 mehr…
  • Baier,H.; Datashvili,L.; Schimitschek,J.: Massive shape adaptivitiy in shell-membranes. Proc. Int. Conf. on Comput. and Exp. Science, 2008 mehr…
  • Baier,H.; Mueller,U.; Rapp,S.: Fibre optic sensor networks for monitoring displacement and temperature fields in smart structures. Proc. SPIE Conf. on Smart Structures and Materials, 2008 mehr…
  • Baier,H.; Datashvili,L.: Scalable and stowable precision antenna reflectors. Proc. ESA Conf. on Antennas, 2008 mehr…
  • Biedermann, W.; Lindemann, U: Cycles in the multiple-domain matrix - Interpretation and applications. 10th International DSM Conference, 2008 mehr…
  • Braun, Stefanie C.; Lindemann, Udo: Anforderungen und Unterstützung eines Multidisziplinären Kostenmanagements. 19. Symposioum Design for X, 20089.-10.10.2008, 45-56 mehr…
  • Braun, Stefanie C.; Lindemann, Udo: The Influence of Structural Complexity on Product Costs. IEEE International Conference on Industrial Engineering and Engineering Management, 200808.-11.12.2008, Seitenzahlen von - bis mehr…
  • Braun, Stefanie; Biedermann, Wieland; Lindemann, Udo: Design to Cost: New Impulses for Target Costing. 10th International Design Conference DESIGN 2008, The Design Society, 200819 - 22.08 2008 mehr…
  • Datashvili,L.; Baier,H.: Shell-Membrane Reflecting Surface Material for Deployable and Transformable Space Reflectors. Proc. ESA Conf. on Antennas, 2008 mehr…
  • Datashvili,L.; Baier,H.: Precision Deployable Shell-Membrane Antenna Reflector for Space Applications. Proceedings of the 59th International Astronautical Congress 2008, 2008 mehr…
  • Decoster, D.; Antonelli, V.; Marissen, R.; Beukers, A.: Hylid forming an innovation in the rubber press forming of thermoplastic composites. SAMPE Europe 29th International Conference, 2008 mehr…
  • Diehl, Holger; Hellenbrand, David; Lindemann, Udo: Transparent 3D Visualization of machatronic systemstructures. 10th International Design Conference DESIGN 2008, The Design Society, 200819 - 22.05 2008 mehr…
  • Engelhard, Marco; Shea, Kristina: Semantic Web Services for the Cognitive Machine Shop. 1st International Workshop on Cognition for Technical Systems, 200806.-07.10.2008 mehr…
  • Ertelt, Christoph; Shea, Kristina: Generative design and CNC fabrication using shape grammars. ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, 2008August 3-6 mehr…
  • Gaag, A.; Kohn, A.; Franz, J.: Semantic Enterprise - Unleashing Solution Knowledge in the Area of Mechanical Engineering. 2nd European Semantic Technology Conference (ESTC 2008), 200824-26 September 2008 mehr…
  • Gorbea, C.; Fricke, E.; Lindemann, U.: The Design of Future Cars in a New Age of Architectural Competition. 20th International Conference on Design Theory and Methodology (DTM), 20083-6 August 2008 mehr…
  • Gorbea, C.; Spielmannleitner, T.; Lindemann, U.; Fricke, E.: Analysis of Hybrid Vehicle Architectures Using Multiple Domain Matrices. DSM 09, 200811. - 12. November mehr…
  • Graebsch, Martin; Roelofsen, Julia; Lindemann, Udo: Lean Development in the Automotive Industry: The Snap-Shot Approach. The FISITA World Automotive Congress, 200814..19.09.2008 mehr…
  • Hellenbrand, David; Lindemann, Udo: Using the DSM to Support the Selection of Product Concepts. 10th International DSM Conference, Hanser, 200811. - 12.11.2008, 363-374 mehr…
  • Hornung,C.; Pflanz,G.; Baier,H.: Adaptive feedforward control for active vibration reduction of convertible vehicles. Adaptronic Conf., 2008 mehr…
  • Huber,M.; Petersson,Ö.: Knowledge-based Modeling of Manufacturing Aspects in Structural Optimization Problems. Proceedings of EngOpt 2008 - International Conference on Engineering Optimization, 2008 mehr…
  • Ilie, D.; Fischer, F.; Lindemann, U.: Analysis of the information environment in the context of target and requirements management in the automotive industry. ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, 20083-6 August 2008 mehr…
  • Jowers, I.; Prats, M.; Lim, S.; McKay, A.; Garner, S.; Chase, S.: Supporting reinterpretation in computer-aided conceptual design. Sketch Based Interfaces and Modeling, Eurographics Association, 200811.-13.06.2008, 151-158 mehr…
  • Kain, A.; Kirschner, R.; Lindemann, U.; Wastian, M.; Schneider, M.; Klendauer, R.; Gunkel, J.: An approach to model time dependent process-stakeholder networks. 10th International DSM Conference, 2008November 11 - 12, 2008 mehr…
  • Kain, Andreas; Hoisl, Frank; Shea, Kristina: A method and software prototype to support on-line planning on CNC machines. ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, ASME, 200803.08-06.08.2008 mehr…
  • Kreimeyer, Matthias; Braun, Stefanie; Gürtler, Matthias; Lindemann, Udo: Relating two Domains via a Third – An Approach to Overcome Ambiguous Attributions using Multiple Domain Matrices. ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, ASME, 200803. - 06.08.2008t mehr…
  • Kreimeyer, Matthias; Daniilidis, Charampos; Lindemann, Udo: A Procedural Model for Process Improvement Projects. Ediprod, Zielona Gora, 200810. - 12.09.2008, 275-282 mehr…
  • Kreimeyer, Matthias; Deubzer, Frank; Herfeld, U.; Lindemann, Udo: Strategies Towards Maturity Of Product Information Objects To Manage Concurrent Engineering Processes. Tools and Methods of Competitive Engineering, Delft University of Technology, 200821.-25.04.2008 mehr…
  • Kreimeyer, Matthias; Gürtler, Matthias; Lindemann, Udo: Structural metrics for decision points within Multiple-Domain Matrices representing design processes. 2008 IEEE International Conference on Industrial Engineering and Engineering Management, IEEE, 200808-11.12. 2008 mehr…
  • Kreimeyer, Matthias; König, Carsten; Braun, Thomas: Structural Metrics To Assess Processes. 10th International DSM Conference, Hanser, 200811 - 12.11.2008, 245-259 mehr…
  • König, Carsten; Kreimeyer, Matthias; Braun, Thomas: Multiple-Domain Matrix As A Framework For Systematic Process Analysis. 10th International DSM Conference, Hanser, 200811 - 12.11.2008, 231-244 mehr…
  • Langer, Stefan; Kreimeyer, Matthias; Müller, P.; Lindemann, Udo; Blessing, L.: Entwicklungsprozesse hybrider Leistungsbündel – Evaluierung von Modellierungsmethoden unter Berücksichtigung zyklischer Einflussfaktoren. Dienstleistungsmodellierung - Methoden, Werkzeuge und Branchenlösungen, Physica, 200814.03.2008 mehr…
  • Lauer, Wolfgang; Faerber, M.; Roelofsen, Julia; Jochaud, F.; Jablonski, S.; Lindemann, Udo: Process Management System for the Integration of Situation Dependent Process Planning. 2008 IEEE International Conference on Industrial Engineering and Engineering Management, 200808-11.12. 2008 mehr…
  • Lauer, Wolfgang; Felgen, Luc; Ponn, Joseph; Hübner, Wolfgang; Lindemann, Udo: Support of the Product Development Process by a New Approach using Multiple Views on Physical Effects. The FISITA World Automotive Congress, FISITA (UK) Limited, 30 Percy St, London W1T 2DB, United Kongdom, 200814.-19.09. 2008 mehr…
  • Lauer, Wolfgang; Lindemann, Udo: Initial Steps of Developing a Process Integrative Structuring of Documents Containing Product Information. 10th International Design Conference DESIGN 2008, The Design Society, 200819. - 22.05. 2008 mehr…
  • Maurer, Maik; Braun, Thomas: The Why-Matrix. 10th International DSM Conference, Hanser, 200811-12.11.2008 mehr…
  • Perterer,M.; Müller,U.; Baier,H.: Advanced inspection techniques for life-cycle monitoring of aerospace structures. Proceedings International Symposium on NDT in Aerospace 2008,, 2008 mehr…
  • Rapp,S.; Lang,M.; Letschnik,J.; Nathrath,N.; Trümper,M.; Fasold,D.; Walter,U.; Baier,H.; Krämer,L.: CFK Struktur einer leichten Intersatelliten Antenne (LISA). Proc. der DGLR Tagung, 2008 mehr…
  • Rapp,S.; Reutlinger,A.; Zuknik,K.H.; Baier,H.;: An integrated temperature sensor network for satellite sandwich panels. Proceedings of the IAC Congress 2008, 2008 mehr…
  • Rapp,S.; Zuknik,K.; Reutlinger,A.; Baier,H.: A demonstrator for an integrated temperature sensor network for satellite panels. 4th European Workshop on Structural health Monitoring, 2008 mehr…
  • Shea, K.; Engelhard, M.; Helms, B; Merz, M.: Teaching An Integrated New Product Development Seminar On Cognitive Products. 10th International Design Conference DESIGN 2008, The Design Society, 2008May 19 - 22, 2009 mehr…
  • Shea, Kristina; Engelhard, Marco; Ertelt, Christoph; Hoisl, Frank: A Framework for a Cognitive Design-to-Fabrication System. 7th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2008), 200821. – 25. April 2008, 1185-1200 mehr…
  • Stowe, Harold; Browning, Tyson; Maurer, Maik: Integrated Dynamic Planning (IDP). 10th International DSM Conference, Hanser, 200811-12.11.2008 mehr…
  • Treiber,J.; Mueller,U.; Han,J.-H.; Baier,H.: Filtering techniques in the dynamic deformation estimation using multiple strains measured by FBGs. International Symposium Smart Structures/NDE, 2008Vol. 6932 of Proc. of SPIE, pages 69322A1-69322A9 mehr…
  • Wagner, C.; Graebsch, Martin; Seering, W.; Lindemann, Udo: Specification Risk Analysis: Introducing a Risk Management Method for Product Architectures. 10th International Design Conference DESIGN 2008, 200819.-22.05.2008 mehr…
  • Zaeh, M. F.; Beetz, M.; Shea, Kristina; Reinhart, G.; Stursberg, O.; Ostgathe, M.; Lau, C.; Ertelt, C.; Pangercic, D.; Ruehr, T.; Ding, H.; Paschedag, T.: An Integrated Approach to Realize the Cognitive Machine Shop. 1st International Workshop on Cognition for Technical Systems, 200806.-07.10.2008 mehr…

2007

  • Antonelli, V.; Terzi, A.; Labordus, M.: Structural design of the superbus. XVI. International Conference on Composite Materials, 2007 mehr…
  • Antonelli, V.; Terzi, A.; Ockels, WJ; Beukers, A.: Preliminary design of the superbus. SAMPE Europe 28th International Conference, 2007 mehr…
  • Baier,H.; Datashvili,L.; Rapp,S.: Functional membranes - a basis for satellite architectures of the future. European Conference on Aerospace Science (CEAS), 2007 mehr…
  • Baier,H.; Datashvili,L.; Rapp,S.: Smart membranes for aerospace applications. Int. Conf. on Smart Materials and Nanotechnology in Engineering (SMN07), 2007 mehr…
  • Baier,H.; Rapp,S.: In-orbit monitoring and readjustment of satellite structures. European Conference on Aerospace Science (CEAS), 2007 mehr…
  • Bolognini, F.; Seshia, A.A.; Shea, K.: A computational design method for MEMS using COMSOL. European COMSOL Conference 2007, 200723.-24.10.2007 mehr…
  • Bolognini, F.; Seshia, Ashwin A.; Shea, Kristina: Exploring the Use Of Multi-Domain Computational Synthesis in MEMS Design: An Algorithmic Simulation-Based Method. 16th International Conference on Engineering Design ICED'07, 200728.-30.08.2007 mehr…
  • Braun, Stefanie C.; Lindemann, Udo: A Multilayer Approach for Early Cost Estimation of Mechatronical Products. 16th International Conference on Engineering Design ICED'07, 200728.-30.08.2007 mehr…
  • Braun, Stefanie C.; Lindemann, Udo: Multiplanare Vernetzungen – Abhängigkeiten zwischen Produktkonzept, Produkterstellungsprozess und Ressourcenverbrauch in der Mechatronik. 5. Paderborner Workshop - Entwurf mechatronischer Systeme, 200722-23.03.2007 mehr…
  • Braun, Stefanie; Lindemann, Udo: Kostenfrüherkennung mechatronischer Produkte mittels Analyse multiplanarer Vernetzungen. VDI Mechatronik 2007 - Innovative Produktentwicklung, 200723.-24.05.2007 mehr…
  • C. Zauner, H. Baier, M. Reindl,: Shock and elastic waves in space structures: simulation, attenuation and usage for monitoring. European Conference on Aerospace Science (CEAS), 2007 mehr…
  • Deubzer, F.; Kreimeyer, Matthias; Herfeld, U.; Lindemann, Udo.: A Strategy for Efficient Collaboration in Virtual Product Development Environments. 16th International Conference on Engineering Design ICED'07, 200728.-30.08.2007 mehr…
  • Diehl, Holger; Lindemann, Udo: 3D-Skizzieren mit Hilfe von Augmented Reality. Forum 3D, 3D-Technologien an der Technischen Universität München, 2007 mehr…
  • Diehl, Holger; Lindemann, Udo: Integration eines 3D-Skizziertools in den Produktentwicklungsprozess. 6. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung, 2007 mehr…
  • Eckert, C. M.; Jowers, I.; Clarkson, P. J.: Knowledge requirements over long product lifecycles. 16th International Conference on Engineering Design, 200728.-31.08.2011 mehr…
  • Frank, Tobias; Herfeld, Ulrich; Kreimeyer, Matthias; Lindemann, Udo: Parametrische Optimierung im CAD-CAE-Prozess der Karosserieentwicklung. ANSYS Conference & 25th CADFEM Users’ Meeting 2007, CADFEM, 200721.-23.11.2007 mehr…
  • Gorbea, Carlos; Fricke, Ernst; Lindemann, Udo: Pre-Selection of Hybrid Electric Vehicle Architectures During the Initial Design Phases. 9th International DSM Conference, 200716.-18.10.2007 mehr…
  • Grieb, Jöran; Kreimeyer, Matthias; Lindemann, Udo: Methodical Support of Multidisciplinary Globally Distributed Design Projects. ProSTEP iViP Science Days 2007, 200725.-26.09.2007 mehr…
  • Hepperle, Clemens; Maier, Anja M.; Kreimeyer, Matthias; Lindemann, Udo; Clarkson, John P.: Analyzing Communication Dependencies in Product Development Using the Design Structure Matrix. 9th International DSM Conference, 200716.-18.10.2007 mehr…
  • Hepperle, Clemens; Mörtl, Markus; Lindemann, Udo: BIONIK - Mit Methode zu technischen Lösungen durch Inspiration aus der Natur. Innovationsquelle Natur - Innovationsquelle Bionik, 200718.10.2007 mehr…
  • Hornung,C.; Pflanz,G.; Baier,H.: Active vibration control study for convertible vehicles based on disturbance analysis. Proc. Adaptronic Congress, 2007 mehr…
  • Hornung,C.; Pflanz,G.; Baier,H.: Störgrößenuntersuchung am Cabrioletfahrzeug für die gezielte Auslegung von Regelungsstrategien zur aktiven Schwingungsreduzierung. Proceedings Adaptronic Congress, 2007 mehr…
  • Huber,M.; Petersson,Ö.; Baier,H.: Completeness of Problem Formulation via Knowledge-based Models. EUROMECH Colloquium 482 - Efficient Method for Robust Design and Optimization, 2007 mehr…
  • Koussios, S.; Beukers, A.; Bergsma, OK; Bersee, Hen; Antonelli, V.: Continuous fibre reinforced composites: Integral design for filament winding. Aachen-Dresden International Textile Conference, 2007 mehr…
  • Kreimeyer, Matthias; Deubzer, F.; Danilovic, M.; Fuchs, S. D.; Herfeld, U.; Lindemann, Udo: Team composition to enhance collaboration between embodiment design and simulation departments. 16th International Conference on Engineering Design ICED'07, 200728.-30.08.2007 mehr…
  • Kreimeyer, Matthias; Eichinger, Markus; Lindemann, Udo: Aligning multiple domains of design processes. 16th International Conference on Engineering Design ICED'07, 200728.-30.08.2007 mehr…
  • Kreimeyer, Matthias; Eichinger, Markus; Lindemann, Udo: Assessment of Process Networks using Graph and Network Theory Based Key Figures. 4th Future Business Technology Conference, Eurosis-ETI, 200725.-27.04.2007 mehr…
  • Kuhn,T.; Rößler,C.; Baier,H.: Multidisciplinary Design Methods for the Hybrid Universal Ground Observing (HUGO) Airship. 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO), 2nd Centre of Excellence for Integrated Aircraft Technologies (CEIAT), International Conference on Innovation and Integration in Aerospace Sciences and 17th Lighter-Than-Air Systems Technology Conference (LTA), 2007 mehr…
  • Lauer, Wolfgang; Nißl, Alexandra; Braedt, Henrik; Lindemann, Udo: Tug Together - Supportive Tool for Distributed Design Teams. 16th International Conference on Engineering Design ICED'07, 200728.-31.08.2007 mehr…
  • Lauer, Wolfgang; Ponn, Josef; Lindemann, Udo: Purposeful Integration of Product Models into the Product Development Process. 16th International Conference on Engineering Design ICED'07, 200728.-31.08.2007 mehr…
  • Lindemann, Udo; Maurer, Maik: Facing Multi-Domain Complexity in Product Development. The Future of Product Development – Proceedings of the 17th CIRP Design Conference, Springer, 2007 mehr…
  • Maier, Anja; Hepperle, Clemens; Kreimeyer, Matthias; Eckert, Claudia; Lindemann, Udo; Clarkson, John: Associations Between Factors Influencing Engineering Design Communication. 16th International Conference on Engineering Design ICED'07, 200728.-31.08.2007 mehr…
  • Malherbe, Laurent; Herfeld, Ulrich; Kreimeyer, Matthias; Deubzer, Frank; Deneux, Dominique: De la mise en relation des structures produit et fonctionnelle dans le développement automobile pour gerer les flux informationelles. 10eme Colloge National AIP-PRIMECA: Les Innovations en Conception des Produits et des Systèmes de Production, AIP-Primeca, 200718.-20.04.2007 mehr…
  • Maurer, Maik; Kesper, Heiner; Lindemann, Udo: Optimization of a system’s overall structural criticality using evolutionary algorithms. International Conference on Industrial Engineering and Systems Mangement (IESM 2007), Tsinghua University Press, 200730.05.-02.06.2007 mehr…
  • Mörtl, M.: Heute schon kreativ gewesen? Einfache Methoden für neue Ideen und Übungsbeispiele. Innovationsmanagement - Von der Idee zur praktischen Umsetzung., Haus der Technik e.V., 2007Ismaning, 27.03.2007-28.03.2007 mehr…
  • Pecquet, N.; Kirschner, R.; Lindemann, Udo: Wirkung und Bedeutung von Kommunikation im Innovationsprozess. Design for X, Beiträge zum 18. Symposium, Lehrstuhl für Konstruktionstechnik, 200711.-12.10.2007 mehr…
  • Petermann, Markus; Trevelyan, James; Felgen, Luc; Lindemann, Udo: Cross Cultural Collaboration in Design Engineering – Influence Factors and their impact on work performance. 16th International Conference on Engineering Design, 200728.-30.08.2007 mehr…
  • Ponn, Josef; Kreimeyer, Matthias; Lindemann, Udo: Methodical Evaluation of Single and Group Projects. 9th International Conference on Engineering and Product Design Education (E&PDE), Hadleys, 200713.-14.09.2007 mehr…
  • Rapp,S.: Deformation field estimation using fiber bragg gratings. European Conference on Aerospace Science (CEAS), 2007 mehr…
  • Rapp,S.; Kang,L.; Mueller,U.; Han,J.; Baier,H.: Dynamic shape estimation by modal approach using fiber Bragg grating strain sensors. Smart Structures and Materials 2007 - Sensors and Smart Structures Technologies, 2007 mehr…
  • Roelofsen, Julia; Baumberger, Christoph; Lindemann, Udo: An approach towards situation-specific planning of design processes. 16th International Conference on Engineering Design ICED'07, Dr. Hut, 200728.-30.08.2007 mehr…
  • Roelofsen, Julia; Lauer, Wolfgang; Lindemann, Udo: Product Model Driven Development. 14th European Concurrent Engineering Conference, 200725.-27.04.07 mehr…
  • Roose,S.; Stockman,Y.; Rochus,P.; Kuhn,T.; Baier,H.; Casarosa,G.; Langlois,S.: Optical methods for non-contact measurements of membrane space structures. Proc. 10th European Conference on Spacecraft Structures, Materials & Mechanical Testing and 1st CEAS European Air and Space Conference, 2007 mehr…
  • Roose,S.; Stockmann,Y.; Rochus,P.; Kuhn,T.; Baier,H.; Casarosa,G.; Langlois,S.: Optical methods for non contact measurements of membranes. International Astronautical Congress (IAC-07-C2.2.1), 2007 mehr…
  • Schimitschek,J.; Datashvili,L.; Kuhn,T.; Baier,H.: Charakterisierung, Modellierung und Funktionalisierung von Membranstrukturen. DGLR Workshop X, Luftfahrzeuge leichter als Luft, Leichtbau im Rahmen der leichter-als-Luft-Technologie, 2007 mehr…
  • Schuster, Ilona; Dick, Birgit; Schaub, Petra-Badke; Lindemann, Udo: Evaluation of a methodological training in design education. 16th International Conference on Engineering Design ICED'07, 200728.-30.08.2007 mehr…
  • Shea, Kristina: Design Automation Tools for Early Phase Engineering. ProSTEP iViP Science Days 2007, 200725.-26.09.2007 mehr…
  • T. Kuhn, C. Rößler, H. Baier,: Multidisziplinäre Optimierung am 'Hybrid Universal Ground Observing Airship' (HUGO). DGLR Workshop X, Luftfahrzeuge leichter als Luft, Leichtbau im Rahmen der leichter-als-Luft-Technologie, 2007 mehr…
  • Wildschek,A.; Maier,R.; Baier,H.: Argumentation of active wing-bending control with a supplementary adaptive feed-forward control algorithm. Proceedings of 2nd Europ. Conference of Aerospace Science (EUCASS), 2007 mehr…

2006

  • Antonelli, V.; Marissen, R.; Bersee, Hen; Beukers, A.: The effect of the thermal expansion of the rubber mould on the pressure forming of thermoplastis. SAMPE Europe International Conference, 2006 mehr…
  • Baier,H.; Datashvili,L.; Natrath,N.: The deployable precision shell-membrane reflector SMART. Proc. Euro. Conf. on Antennas and Propagation, Eucap 2006, 2006 mehr…
  • Baier,H.; Datashvili,L.; Schimitschek,J.: Faserverbundbauteile mit weichen Matrixwerkstoffen. Workshop Composite Materials, 2006 mehr…
  • Baumberger, C.; Lindemann, U.: Requirement oriented process planning and configuration. NordDesign 2006, Faculty of Engineering, University of Iceland, 200616.-18.08.2006, 244-254 mehr…
  • Braun, S.; Gero, J.: Self-training System that learns through Experimentation. 9th International Design Conference DESIGN 2006, Institution of Engineering Designers, 200615.-18.05.2006, 193-198 mehr…
  • Datashvili,L.; Baier,H.: Membranes and Thin Shells for Space Reflectors. 10th ASCE Aerospace Division International Conference on Engineering, Construction and Operations in Challenging Environments, 2006 mehr…
  • Deubzer, F.; Kreimeyer, M.; Danilovic, M.: Design of Integrated Teams in Automotive Industry – A DMM Application. 8th International Design Structure Matrix Conference, The Boeing Company, 2006 mehr…
  • Deubzer, F.; Kreimeyer, M.; Petermann, M.; Lindemann, U.: Analyse und Modellierung komplexer Systeme und Prozesse unter kognitiven Randbedingungen. Cognitive Systems Engineering in der Fahrzeug- und Prozessführung, DGLR, 200624.-25.10.2006, 257-266 mehr…
  • Deubzer, Frank; Kreimeyer, Matthias; Lindemann, Udo: Exploring Strategies in Change Management - Current Status and Activity Benchmark. 9th International Design Conference DESIGN 2006, Institution of Engineering Designers, 200615.-18.05.2006, 815-822 mehr…
  • Dick, B.; Lindemann, U.: Adaptation of Methods to Crises Situations in Product Development. Norddesign, Faculty of Engineering, University of Iceland, 200616.-18.08.2006, 56-83 mehr…
  • Eichinger, M.; Maurer, M.; Lindemann, U.: Using Multiple Design Structure Matrices. 9th International Design Conference DESIGN 2006, Institution of Engineering Designers, 200615.-18.05.2006, 229-236 mehr…
  • Felgen, L.: Energiemanagement im Kraftfahrzeug - Systemdenken als Basis für Effizienz? , Dr. Hut, 200624.11.2006 mehr…
  • Grieb, J.; Lindemann, U.:: Communication Media in Distributed Collaboration – Analysis in Design Experiments. 9th International Design Conference DESIGN 2006, The Design Society, 200615.-18.05.2006, 541-548 mehr…
  • Grohmann,B.; Baier,H.: Design, Modelling and Testing of Adaptive structures for active trailing edges of helicopter rotors. Proc. De MEASS Conf 2006, 2006 mehr…
  • Grohmann,B.; Maucher,C.; Baier,H.: Multidisciplinary design and optimization of active trailing edge for smart helicopter rotor blade. Proc. Int. Symp. on Design, Modelling and Exp. of Adaptive Structures, 2006 mehr…
  • Hegemann,J.; Baier,H.: Simulation of propagating ultrasonic waves in composites. Proc. Europ. NDT Conference (ECNDT), 2006 mehr…
  • Hegemann,J.; Baier,H.; Pfeiffer,A.: Modelling and simulation of ultrasonic wave propagation in complex composite materials. Proc. Conf. on Damage in Composite Materials (CDCM), 2006 mehr…
  • Keijzer, W.; Kreimeyer, Matthias; Schack, R.; Lindemann, Udo; Zäh, R.: Isolierung versus Vernetzung - wie arbeitet die Branche zusammen? 3rd Internationaler Fachkongress Digitale Fabrik in der Automobilindustrie, mic-management information center GmbH, 200623.-24.05.2006 mehr…
  • Kiefmann, Andreas; Krinninger, Maximilian; Lindemann, Udo; Senner, Veit; Spitzenpfeil, Peter: A new Six Component Dynamometer for Measuring Ground Reaction Forces in Alpine Skiing. ISEA 2006, Springer, 200611.-14.07.2006, 87-92 mehr…
  • Kreimeyer, M.; Eichinger, M.; Maurer, M.; Deubzer, F.: Misalignment between implicit and real process structures. 8th International Design Structure Matrix Conference, The Boeing Company, 2006 mehr…
  • Kreimeyer, Matthias; Braun, Stefanie; Baumberger, C.; Meiwald, Thomas; Petrovic, K.; Bernitz, M.; Stüber, N.: Product Development Seminars - Key Factors for Successful Product Development in Student Teams. 4th Engineering & Product Design Education International Conference - Educating Designers for a Global Context, Institution of Engineering Designers, 20067.-8.9.2006, 335-340 mehr…
  • Kreimeyer, Matthias; Herfeld, U.; Deubzer, Frank; Dequidt, C.; Lindemann, Udo: Function-driven product design in virtual teams through methodical structuring of requirements and components. 8th Biennial ASME Conference on Engineering Systems Design and Analysis ESDA2006, ASME, 20064.-7.7.2006 mehr…
  • Lang,M.; Baier,H.; Ernst,T.: Surface accuracy prediction and optimization of a high precision Q/V-Band reflector. 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2006 mehr…
  • Lindemann, U.; Gaag, A.; Schneider, S.; Wach, J.-J.; Herden, M.-O.; Rasel, T.; Anton, T.: Simulation pneumatischer Systeme als Hilfsmittel der Projektierung von Bremssteuerungen für Schienenfahrzeuge. 8. Internationale Schienenfahrzeugtagung, Eurailpress Tetzlaff-Hestra, 20064.-8. 10. 2006, 94-96 mehr…
  • Lindemann, U.; Maurer, M.; Pulm, U.; Ballestrem, F.; Clarkson, J.: The Subjective Aspects of Design Structure Matrices – Analysis of Comprehension and Application and Means to Overcome Differences. 8th Biennial Conference on Engineering Systems Design and Analysis (ASME-ESDA06), ASME-Books, 20064.-7.7.2006 mehr…
  • Lindemann, U.; Schneider, S.; Wach, J.-J.; Herden, M.-O.; Anton, T.: Optimisation of brake systems by the implementation of pneumatic simulation. 5th International Fluid Power Conference Aachen, Shaker Verlag, 200620.-22.03.2006, 161-170 mehr…
  • Maier, A.; Kreimeyer, Matthias; Herfeld, U.; Deubzer, Frank; Lindemann, Udo; Clarkson, P. J.: Reflecting Communication: A Key Factor for Successful Collaboration between Embodiment Design and Simulation. 9th International Design Conference DESIGN 2006, Institution of Engineering Designers, 200615.-18.05.2006, 1483-1490 mehr…
  • Meiwald, T.; Unser, R.; Rackensperger, D.; Clausen, T.; Labermeyer, M.; Lindmeann: Crossover Design: Lessons Learned From An Interdisciplinary Team Contest. International Design Research Symposium., The Korean Society of Mechanical Engineers, 200610.-11.11.2007, 130-136 mehr…
  • Neff,T.; Dietrach,B.; Baier,H.; Datashvili,L.: The MAPSAR mission: objective and status, Proc. of Conf. on Emerging and Future Technologies for Space-Based Operations Support. Nato Research and Tech. Organisation, 2006 mehr…
  • Oehmen, J.; Dick, B.; Lindemann, U.; Seering, W.:: Risk Management in Product Development - Current Methods. 9th International Design Conference DESIGN 2006, Institution of Engineering Designers, 200615.-18.05.2006, 1551-1558 mehr…
  • Ponn, J.; Deubzer, F.; Lindemann, U.: Intelligent Search for Product Development Information - an Ontology-based Approach. 9th International Design Conference DESIGN 2006, The Design Society, 200615.-18.05.2006, 1203-1210 mehr…
  • Ponn, J.; Lindemann, U.: Method Knowledge Transfer in Product Development via Stories from Student Design Projects. International Design Research Symposium., The Korean Society of Mechanical Engineers, 200610.-11.11.2006, 222-232 mehr…
  • Ponn, J.; Lindemann, U.: How can we extract Experience from Student Design Projects and transfer it to new Projects? 4th Engineering & Product Design Education International Conference - Educating Designers for a Global Context, Institution of Engineering Designers, 200607.-08.09.2006, 409-414 mehr…
  • Ponn, J.; Lindemann, U.: CiDaD - A Method Portal for Product Development. 9th International Design Conference DESIGN 2006, The Design Society, 200615.-18.05.2006, 1221-1228 mehr…
  • Ponn, J.; Lindemann, U.: An Approach towards Situational Design Process Planning and Target-Oriented Application of Design Methods. International Design Research Symposium., The Korean Society of Mechanical Engineers, 200610.-11.11.2006, 90-99 mehr…
  • Ponn, J.; Lindemann, U.: What Information can we extract from the Documentation of Student Design Projects? 9th International Design Conference DESIGN 2006, The Design Society, 200615.-18.05.2006, 1211-1220 mehr…
  • Ponn, J.; Lindemann, U.: Systematisches Vorgehen und gezielter Methodeneinsatz unter Berücksichtigung der Entwicklungssituation. 17. Symposium Design for X, Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik, 200612.-13.10.2006, 69-80 mehr…
  • Pühlhofer,T.; Baier,H.; Krämer,L.; Unruh,T.: Design, Manufacturing and testing of high speed rotating CFRP chopper discs. SAMPE EUROPE International Conference 2006, 2006 mehr…
  • Schneider, S.: Methodenanwendung im Produktentwicklungsalltag. German Chapter of the IEEE Engineering Management Society, Workshop on Innovation Challenge, 200617.11.2006 mehr…
  • Schneider, Sebastian; Anton, T.: Simulating pneumatic brake systems with AMESIM. European AMESIM User Conference, ASME-Books, 200629.-31.03.2006 mehr…
  • Schneider, Sebastian; Erdell, Elmar; Lindemann, Udo: Enhancing buildings with engineering design methods. Norddesign, Faculty of Engineering, University of Iceland,, 200616.-18.08.2006, 343-353 mehr…
  • Schneider, Sebastian; Meissner, Moritz; Lindemann, Udo: A Survey about the Use of Methods in German Industry. Norddesign, Faculty of Engineering, University of Iceland,, 200616.-18.08.2006, 400-407 mehr…
  • Wildschek,A.; Maier,R.; Jeanneau,M.; Baier,H.: Active wing load alleviation with an adaptive feed-forward control algorithm. Proc. AIAA Conf. on Guidance, Naviagation and Control. Conf. 2006, 2006 mehr…

2005

  • Antonelli, V.: The Behaviour of Rubber During Pressure Forming of Thermoplastic Composites. SAMPE Europe Conference, 2005 mehr…
  • Antonelli, V.; Kuilen, J.-W.G van de; Pauw, I.: The Design of a Timber Guardrail for Highways. IWGC3, 2005 mehr…
  • Baier,H.; Datashvili,L.; Helwig,G.: Advancing material composites for new types of antennas. Proc. ESA Antenna Workshop, 2005 mehr…
  • Baier,H.; Datashvili,L.; Müller,U.: Optimisation and experimental characterisation of hybrid material space structures. ESA Conf. on space structures, materials and testing, 2005 mehr…
  • Baier,H.; Huber,M.: Integration von qualitativem Wissen in die Strukturoptimierung am Beispiel komplexer Fertigungsanforderungen. 23. CADFEM User´s Meeting, 2005 mehr…
  • Baier,H.; Huber,M.: Integration of Qualitative Knowledge and Fuzzy Constraints in MDO Problems. EUROGEN 2005, 2005 mehr…
  • Baier,H.; Huber,M.; Raffaelli,L.: Modellbasierte Optimierung und experimentelle Charakterisierung der Thermo- und Kryo-Mechanik werkstoffhybrider Bauteile. 2. Landshuter Leichtbaucolloquium, 2005 mehr…
  • Baier,H.; Huber,M.; Raffaelli,L.: Thermo-Mechanik werkstoffhybrider Bauteile bei tiefen Temperaturen. Landshuter Leichtbaukolloquium, 2005 mehr…
  • Baier,H.; Müller,M.; Zauner,C.: Structure-Control-Optics Interaction in High Precision Telescopes. Structure-Control-Optics Interaction in High Precision Telescopes, 2005 mehr…
  • Baier,H.; Zauner,C.: Structure-Control-Optics Interaction in high precision telescopes. IUTAM Congress on Control of Nonlinear Mechanical Systems, 2005 mehr…
  • Baldock, R.; Shea, K.; Eley, D.: Evolving optimized braced steel frameworks for tall buildings using modified pattern search. International Conference on Computing in Civil Engineering, ASCE 2005, 2005 mehr…
  • Baumberger, C.: Methods of requirement specification in the context of product individualization and mass customization. 3rd World Congress on Mass Customization and Personalization 2005, HKUST, 200518.-21.09.2005 mehr…
  • Berger,U.; Baier,H: Ultraschallbasierende Überwachung von Leichtbaustrukturen. GESA-Symposium 2005, 2005 mehr…
  • Berger,U.; Kuhn,T.; Baier,H.: Alternative Strukturbauweisen und deren Zustandsüberwachung bei Luftschiffen. Deutscher Luft- und Raumfahrtkongress 2005, 2005 mehr…
  • Datashvili,L.; Lang,M.; Baier,H.; Sixt,T.: Membranes for large and Precision deployable Reflectors. Proc. of European Conference on Spacecraft Structures, Materials & Mechanical Testing 2005, 2005 mehr…
  • Datashvili,L.; Nathrath,N.; Lang,M.; Baier,H.; Fasold,D.; Pellegrino,S.; Soykasap,O.; Tan,L.; Kueh,A.; Mangenot,C.; Santiago-Prowald,J.: New Concepts and Reflecting Materials for Space Borne Large Deployable Reflector Antennas. Proc. of 28th ESA Antenna Workshop on Space Antenna Systems and Technologies, 2005 mehr…
  • Deubzer, F.; Herfeld, U.; Kreimeyer, M.; Lindemann, U.: A structured holistic approach for the integration of CAD and CAE environments. ProSTEP iViP Science Days 2005 - Cross Domain Engineering, ProSTEP iViP Association, 200528.-29.09.2005 mehr…
  • Dick, B.; Jokele, B.; Lindemann, U.: Best Practice Principles for the Prevention of Crisis in Product Development. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005, 355-356 mehr…
  • Diehl, H.; Abicht, F.; Lindemann, U.: Realisation of a low cost VR-CAD-System using Open Source Software. Virtual Concept 2005 Biarriz, Springer, 200508.-10.11.2005 mehr…
  • Erdell, E.; Lindemann, U.; Schneider, S.: Ecologic Optimisation of a Buliding with Methods. 12th CIRP Seminar on Life Cycle Engineering, Laboratoire, 200503.-05.04.2005 mehr…
  • Felgen, L.; Deubzer, F.; Lindemann, U.: Complexity management during the analysis of mechatronic systems. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005, 409-411 mehr…
  • Gahr, A.; Lindemann, U.: Individual Pathways - a cost management approach for product development in mass customization. 3rd Interdisciplinary World Congress on Mass Customization and Personalization (MCPC 2005), HKUST, 200518.-21.09.2005 mehr…
  • Grieb, J.; Felgen, L.: Verteilte Entwicklung in interkulturellen Teams. Kolloquium zum 40jährigen Bestehen des Lehrstuhls für Produktentwicklung, 200507.10.2005, 21-30 mehr…
  • Grieb, J.; Lindemann, U.: Providing Commmunication Media for Distributed Design. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005, 97-98 mehr…
  • Grieb, J.; Lindemann, U.: Design Communication in Industry: A Survey Analysis. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005, 586-587 mehr…
  • Jung, Chr.; Voss, B.; Krane, M.; Schad, H.; Heimisch, W.; Lange, R.; Bauernschmitt, R.: Effect of “physiological” pulsatile perfusion on renal blood flow during cardiopulmonary bypass. 34.Jahrestagung der Deutschen Gesellschaft für Thorax-, Herz- und Gefäßchirurgie, 200513.-16.02.2005 mehr…
  • Kreimeyer, M.; Deubzer, F..; Herfeld, U.; Lindemann, U: Holistic Integration of CAD and CAE: Analysis and Combination of Diverse Current Approaches. 9th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, 200526.-30.09.2005, 1081-1084 mehr…
  • Kreimeyer, M.; Deubzer, F.; Herfeld, U..; Lindemann, U.: A Survey on Efficient Collaboration of Design and Simulation in Product Development. 23rd CADFEM Users' Meeting - International Congress on FEM Technology, CADFEM, 200509.-11.11.2005 mehr…
  • Kreimeyer, M.; Ponn, J.; Lindemann, U.: Analysis and Benchmark of Methods for Process Modeling. 9th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, 200526.-30.09.2005, 449-452 mehr…
  • Kuhn,T.; Berger,U.; Lang,M.; Baier,H.: Advanced tailplane designs and repair mechanisms for the semirigid airship Zeppelin NT. 5th AIAA Aviation, Technology, Integration, and Operations Conference (ATIO) and 16th AIAA Lighter-than-Air and Balloon Systems Conference (LTA), 2005 mehr…
  • Lang,M.; Baier,H.; Ernst,T.: High precision thin shell reflectors - design concepts, structural Optimization and shape adjustment techniques. Proc. of European Conference on Spacecraft Structures, Materials & Mechanical Testing 2005, 2005 mehr…
  • Lindemann, U.; Chakrabarti, A.; Grieb, J.; Felgen, L.: Examining Influence Factors in Cross-Cultural Distributed Design. 2nd German-Israeli Symposium for Design and Manufacture, Fraunhofer IRB, 200507.-08.07.2005, 23-33 mehr…
  • Maurer, M.; Biedermann, W.: Specification of Individualized Products by Neural Networks. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005 mehr…
  • Maurer, M.; Boesch, N-O.; Sheng, G.; Tzonev, B.: A Tool for Modelling Flexible Product Structures - MOFLEPS. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005 mehr…
  • Maurer, M.; Lindemann, U.: Sensitivity as an Assessment Criterion for Product Spectra. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005 mehr…
  • Maurer, M.; Lindemann, U.: Individualized Product Design by Evolutionary Algorithms. Knowledge-Based Intelligent Informations and Engineering Systems, 9th International Conference, Springer, 200514.-16.09.2005, 1359-1365 mehr…
  • Maurer, M.; Rupp, T.; Lindemann, U.: Efficient Product Customization by Structure Synthesis. 3rd Interdisciplinary World Congress on Mass Customization and Personalization (MCPC 2005), HKUST, 200518.-21.09.2005 mehr…
  • Mörtl, M.: FlexMaUS: A methodology to fulfil the demands of sustainable production systems and less life-cycle costs during ramp-up. AEIPRO & Dpt. de Expresión Gráfica, Diseno y Proyectos de la Universidad de Málaga.: IX Congreso Internacional de Ingeniería de Proyectos: Proyectemos un Futuro Sostenible, 200522.-24.06.2005 mehr…
  • Müller,U.; Baier,H.: Strain and Temperature Measurement with Fiber Optic Sensors in Composite Structures. Applications for Control and Health Monitoring, submittet to the GESA-Symposium, 2005 mehr…
  • Nißl, A.; Lindemann, U.: Integration of sourcing aspects into target costing. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005, 202-203 mehr…
  • Nißl, A.; Ponn, J.; Lindemann, U.: The Tutorensystem Garching: Education on social Competencies for Engineering Students. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005, 599-600 mehr…
  • Pfeiffer,E.; Kaiser,C.; Schoeppinger,C.; Reutlinger,A.; Wierach,P.; Müller,M.; Müller,U.; Sciacovelli,D.: Design and Construction of an Active Piezo Actuated Tripod Allowing for Compensation of Focal Plane Distortions. European Conference on Spacecraft Structures, Materials and Mechanical Testing, 2005 mehr…
  • Ponn, J.; Braun, T.; Pecquet, N.; Lindemann, U.: CiDaD - Individual and Situational Assistance in Methodical Product Development. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005 mehr…
  • Ponn, J.; Lindemann, U.: Navigation durch die Produktkonkretisierung. 16. Symposium Design for X, Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik, 200513.-14.10.2005, 87-97 mehr…
  • Ponn, J.; Lindemann, U.: Characterization of Design Situations and Processes and a Process Module Set for Product Development. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005 mehr…
  • Reger,J.; Schneider,T.; Baier,H.: Multilevel Optimization with Parameterisation of Geometry for Components under Creep Loads in High Temperature Environments. EUROGEN 2005, 2005 mehr…
  • Sass, l.; Shea, K.; Powell, M.: Design production: constructing freeform designs with rapid prototyping. ECAADE 2005 Digital Design: the quest for new paradigms, Technical University of Lisbon, 2005, 261-268 mehr…
  • Schneider, S.; Lindemann, U.: Usage of methods in student projects. Studying Designers ´05 Aix-En-Provence, University of Provence, 200517.-18.10.2005, 267-276 mehr…
  • Schneider, S.; Lindemann, U.: Anforderungen an ein Bewertungssystem für Methoden. 16. Symposium Design for X, Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik, 200513.-14.10.2005, 11-16. mehr…
  • Schneider, S.; Lindemann, U.: On the interaction of processes, tasks and methods. 15th International CIRP Design Seminar 2005, 200522.-26.05.2005, 104-107. mehr…
  • Starling, A.C.; Shea, K.: Virtual synthesisers for mechanical gear systems. 15th International Conference on Engineering Design ICED'05, Institution of Engineers, 200515.-18.08.2005, S. 120-121 mehr…
  • Starling, A.C.; Shea, K.: A parallel grammar for simulation-driven mechanical Computational Design. ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 2005 mehr…

2004

  • Antonelli, V.; Labordus, M.; Nederveen, P.J.: Composite End-Closures for an Authonomous Underwater Vehicle, Design and Manufacturing. International Conference on Flow Processes in Composite Materials, 2004 mehr…
  • Baier,H.; Langer,H.: Integrated Design Optimization of Structural and Actuator Parameters in Reflector Shape Control. Proceedings SPIE - Astronomical Telescopes and Instrumentation, 2004 mehr…
  • Baier,H.; Pühlhofer,T.; Huber,M.; Langer,H.: Configuration Design Optimization with Geometrical and Physical Constraints by Combining CAD-, FEM- and Optimization -Tools. 22. CADFEM User´s Meeting, 2004 mehr…
  • Baier,H.; Tan,H.; Datashvili,L.: Deployment dynamics of inflatable fabric prepreg tubes with application concepts for stowable reflectors. Proceedings 2nd European Workshop on Inflatable Space Structures, 2004 mehr…
  • Baumberger, C.: Industriekolloquium des Sonderforschungsbereichs 582 in München. , 200429.04.2004, 5-6 mehr…
  • Baumberger, C.; Stegmann, R.; Stotko, C.: Szenario 2015 - Eine Vision der marktnahen Produktion individualisierter Produkte. Industriekolloquium Sonderforschungsbereich 582, 200429.04.2004, 2.1-2.20. mehr…
  • Berger,U.; Baier,H.: Experimental and Analytical Investigations in Structural Health Monitoring with LAMB-Waves. Proceedings vom 2nd European Workshop on Structural Health Monitoring, 2004 mehr…
  • Berger,U.; Müller,U.; Baier,H.: Strukturüberwachung mit integrierter faseroptischer Sensorik und Lamb-Wellentechnik. Deutscher Luft- und Raumfahrtkongress 2004, 2004 mehr…
  • Braun, T.; Gausemeier, J.; Lindemann, U.; Orlik, L.; Vienenkötter, A.: Design Support by Improving Method Transfer - A Procedural Model and Guidelines for Strategic Product Planning in Small and Medium-sized Enterprises. 8th International Design Conference DESIGN 2004, 200418.-21.05.2004, 143-148 mehr…
  • Braun, T.; Lindemann, U.: Method adaptation - A way to improve methodical product development. 8th International Design Conference DESIGN 2004, 200418.-21.05.2004, 977-982 mehr…
  • Datashvili,L.; Lang,M.; Baier,H.: Advanced reflector concepts. Deutscher Luft- und Raumfahrtkongress 2004, 2004 mehr…
  • Diehl, H.; Lindemann, U.; Müller, F.; Schneider, S.: A new approach for gesture-based sketching. 8th International Design Conference DESIGN 2004, 200418.-21.05.2004, 735-740 mehr…
  • Diehl, H.; Müller, F.; Lindemann, U.: From raw 3D-Sketches to exact CAD product models - Concept for an assistant-system. Workshop on Sketch-Based Interfaces and Modeling 2004, 200430.-31.08.2004 mehr…
  • Diehl, H.; Müller, F.; Lindemann, U.: Konzept zur Konkretisierung von 3D-Skizzen in einer Virtual-Reality-Umgebung. Augmented & Virtual Reality in der Produktentstehung, Heinz Nixdorf Institut, 200417.-18.06.2004, 73-82 mehr…
  • Encinar,J.; Zornoza,J.; Arrebola,M.; Datashvili,L.; Baier,H.; Legay,H.; Toso,G.: Design of a Three-Layer Printed Reflectarray for Dual Polarisation and Dual Coverage. 27th ESA Antenna Technology Workshop on Innovative Periodic Antennas, 2004 mehr…
  • Gahr, A.; Lindemann, U.: Ein methodischer Ansatz zur induzierten Kostenkalkulation individualisierter Produkte. 15. Symposium Design for X, Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik 2004,, 200414.-15.10.2004, 159-168 mehr…
  • Gahr, A.; Lindemann, U.; Saltykov, A.: Implementation of target costs in mass customization design process. 8th International Design Conference DESIGN 2004, 200418.-21.05.2004, 1027-1032 mehr…
  • Gan, MD.; Verheus, AS; Antonelli, V.: Tilting bird - Design of a composite safety fence. 7th World Pultrusion Conference, 2004 mehr…
  • Gourtovaia, M.; Shea, K.; Bracewell, R.: Developing Intuitive and Interactive Software Demonstrators for Computational Design Methods. Next Generation - Intelligent Systems in Engineering, the 11th International Workshop of the European Group for Intelligent Computing in Engineering (EG-ICE), 2004, 1-10 mehr…
  • Hu, X. Y.; Khoo, B. C., Zhang, D.L.; Jiang, Z.L.: The cellular structure of a two-dimensional H 2/O 2/Ar detonation wave. Combustion Theory and Modelling (8), 2004, pp.- 1-21 mehr…
  • Hu, X. Y.; Khoo, B.C.: An interface interaction method for compressible multifluids. Journal of Computational Physics (198), 2004, pp. 35-64 mehr…
  • Hutterer, P.; Eris, O.; Jung, M.; Leifer, L.; Lindemann, U.; Mabogunje, A.: What do Designers really need? - An Explorative Experiment before Developing Teaching Tools and Methods. Cognition and Exploratory Learning in Digital Age CELDA 2004, 200415.-17.12.2004, 419-422 mehr…
  • Hutterer, P.; Stößer, R.; Diehl, H.; Forzi, T.; Peters, M.; Winkelmann, K.: Angewandtes Wissensmanagment ist immer ein individueller Weg - Praxiserfahrungen und kritische Erfolgsfaktoren am Beispiel der W.E.T. Automotive Systems AG. KnowTech 2004, 200418.-19.10.2004, 67-76 mehr…
  • Jowers, I.; Prats, M.; Earl, C.; Garner, S.: On curves and computation with shapes. International Symposium on Generative CAD Systems, School of Architecture, Carnegie Mellon University, 200412.-14.07.2004, 439-457 mehr…
  • Langer,H.; Pühlhofer,T.; Baier,H.: A Multiobjective Evolutionary Algorithm with Integrated Response Surface Functionaltities for Configuration Optimization with Discrete Variables. Proceedings 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference 2004, 2004 mehr…
  • Lindemann, U.: Action orientation of methods to support engineering design. Management of Design Complexity, 200407.-09.10.2004, 45-50 mehr…
  • Lindemann, U.; Baumberger, C.; Pulm, U.: Koordination und Controlling verteilter Produktentwicklungsprozesse. TFB 29. Montageautomatisierung durch Integration von Konstruktion und Planung. Arbeits- und Ergebnisbericht, TU München, 2004, 47-76 mehr…
  • Lindemann, U.; Hutterer, P.: Environmental Problems: Motivation for SMEs towards green thinking? TMCE 2004, Millpress, 200413.-17.04.2004, 1161 mehr…
  • Lindemann, U.; Ponn, J.: Produktindividualisierung - wirtschaftliche Planung und Gestaltung. Industriekolloquium Sonderforschungsbereich 582 - Marktnahe Produktion individualisierter Produkte, Herbert Utz, 200429.04.2004 mehr…
  • Mateika, M.; Hesselbach, J.; Heßling, T.; Lindemann, U.; Schneider, S.: Environmental oriented product planning: Sucess factors and obstacles. TMCE 2004, 200412.-16.04.2004, 1157-1158 mehr…
  • Maurer, M.: Rechnerwerkzeuge für die Planung von individuellen Produkten. Industriekolloquium Sonderforschungsbereich 582, 200429.04.2004 mehr…
  • Maurer, M.; Pulm, U.; Lindemann, U.: Utilization of graph constellations for the development of customizable product spectra. ICSC Interdisciplinary Research, 200429.02.-02.03.2004 mehr…
  • Müller, F.; Lex, S.; Briegel, C.; Lindemann, U.: An innovative user interface for intuitive 3D-sketching in an augmented reality environment. 8th International Design Conference DESIGN 2004, 200418.-21.05.2004, 793-798 mehr…
  • Müller,U.; Raffaelli,L.; Reutliner,A.; Latka,I.; Ecke,W.; Tumino,G.; Baier,H.: Integration and Operation of Fiber Optic Sensors in Cryogenic Composite Tank Structures. Proceedings 2nd European Workshop on Structural Health Monitoring, 2004 mehr…
  • Nißl, A.; Lindemann, U: Zielkostenerreichung im Rahmen globaler Beschaffungsmöglichkeiten. 15. Symposium Design for X, 200414.-15.10.2004, 153 - 158 mehr…
  • Nißl, A.; Lindemann, U.: Reaching the Cost Target - Current Status in SMEs. 8th International Design Conference DESIGN 2004, 200418.-21.05.2004, 883-888 mehr…
  • Pfeiffer,E.; Kaiser,C.; Ernst,T.; Schöppinger,C.; Reutlinger,A.; Wierach,P.; Müller,M.: Aktive Deformationskontrolle anhand einer Dreibeinstruktur eines Raumfahrtteleskops. Proceedings Adaptronic Congress, 2004 mehr…
  • Ponn, J.; Baumberger, C.; Lindemann, U.: Guidelines for the Development of individualized products. 8th International Design Conference DESIGN 2004, Sveucilisna tiskara, 200418.-21.05.2004, 465-470 mehr…
  • Ponn, J.; Braun, T.; Lindemann, U.: Zielgerichtete Produktentwicklung durch modulare Prozessstrukturen und situationsgerechte Methodenauswahl. 15. Symposium Design for X, 200414.-15.10.2004, 113-122 mehr…
  • Ponn, J.; Lindemann, U.; Diehl, H.; Müller, F.: Sketching in early conceptual phases of product design: guidelines and tools. EUROGRAPHICS Workshop on Sketch-Based Interfaces and Modeling, Eurographics Association, 200430.-31. 8.2004, 27-32 mehr…
  • Prats, M.; Jowers, I.; Earl, C.; Garner, S.: Improving product design via a shape grammar tool. 8th International Design Conference, The Design Society, 200418.-21.05.2004, 477-482 mehr…
  • Pühlhofer,T.; Langer,H.; Baier,H.; Huber,M.: Multicriteria and Discrete Configuration and Design Optimization with Applications for Satellites. Proceedings 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference 2004, 2004 mehr…
  • Schneider, S.: TRIZ-Implementierung in KMU. TRIZ-Implementierung in KMU, 200423.-24.06.2004, 26 mehr…
  • Schneider, S.; Erdell, E.; Lindemann, U: Approach for method transfer to civil engineering. Nord Design 2004 - Product Design in Changing Environment, 200418.-20.08.2004 mehr…
  • Schneider, S.; Lindemann, U.: Implementation of modern aspects on design education. International engineering and product design education conference, 200402.-03.09.2004, 354 mehr…
  • Shea, K.: Explorations in using an aperiodic spatial tiling as a design generator. DCC'04, 1st International Conference on Design Computing and Cognition 2004, 2004, 137-258 mehr…
  • Shea, K.; Zhao, X.: A novel noon Mark Cantilever support: from design generation to realization. IASS 2004: Shell and Spatial Sturctures from Models to Realization, 2004 mehr…
  • Tan,H.; Baier,H.;: Inflation and deployment simulation for folded tubes made of rigidizable fabric prepreg. Proceedings 6th World Congress on Computational Mechanics, 2004 mehr…
  • Zauner,C.; Baier,H.: Formkontrolle und Schockreduktion bei Satelliten und hochpräzisen Systemen. Proceedings Adaptronic Congress 2004, 2004 mehr…
  • Zhao, C.; Shea, K.: Performance-based structural synthesis of spatial truss systems. 2nd International Conference of Steel and Composite Structures, ICSCS'04, 2004 mehr…
  • Zhao, X.; Shea, K.: Computational Synthesis of Three-dimensional Discrete Structures. 8th International Symposium on Structural Engineering for Young Experts, 2004, 42-49 mehr…

2003

  • Baier,H.; Müller,M.: Active Precision Structures and Components in Precision Payloads. 54th International Astronautical Congress (IAC), 2003 mehr…
  • Baier,H.; Reindl,M.: Adaptive structures and mechatronic components for vibration and shape control of satellite precision payloads. European Space Mechanisms and Tribology Symposium (ESMATS), 2003 mehr…
  • Baumberger, Chr.; Lindemann, U.; Pulm, U.: The Strategic Process For Developing A Building Set For Complex Products. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2004 mehr…
  • Baumberger, Chr.; Pulm, U.; Lindemann, U.: Coordination And Controlling Of Distributed Product Development Processes. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2003 mehr…
  • Braun, T.; Lindemann, U.: Supporting the Selection, Adaptation and Application of Methods in Product Development. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2003 mehr…
  • Eckert, C.; Pulm, U.; Jarratt, T.: Mass Customisation, Change and Inspiration - Changing Designs to Meet New Needs. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2003 mehr…
  • Fuchs, D. K.; Jokele, B.: Classification Of Product Information In General Context-Individual Dynamic Modelling To Support Quick Understanding. 3rd International Conference Advanced Engineering Design 2003 (AED2003), Czech Technical University in Prague, 200301.-04.06.2003 mehr…
  • Hol, J.; Antonelli, V.: Progressive Damage Modelling of FML´s. Implementation in a UMAT subroutine. ABAQUS User Conference, 2003 mehr…
  • Huber,M.; Baier,H.: Entwurf eines hochgenauen entfaltbaren Membranreflektors für Satelliten. Proc. DGLR Jahrestagung, 2003 mehr…
  • Janitza, D.; Lacher, M.; Maurer, M.; Pulm, U.; Rudolf, H.: A product model for Mass-Customisation products. 7th International Conference, KES 2003 (Part 2), Springer, 2003Sep 03, 1023-1029 mehr…
  • Jokele, B.; Fuchs, D. K.: Entwicklungstätigkeit in zeitkritischen Situationen. 14. Symposium Design for X, Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik, 200313.-14.10.2003 mehr…
  • Jokele, B.; Fuchs, D.K.: Reducing Time for Product Development Process by Evaluation in the Phase of Solution Searching. 3rd International Conference Advanced Engineering Design 2003 (AED2003), Czech Technical University in Prague, 200301.-04.06.2003 mehr…
  • Klammer,J.; Baier,H.: Vibroakustik und Wärmetransport doppelschaliger CFK-Rümpfe. Proc. DGLR Jahrestagung, 2003 mehr…
  • Lindemann, U.: Methods are networks of Methods. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2003 mehr…
  • Lindemann, U.: Produkte im Wettbewerb - Potenziale aus Konstruktion / Entwicklung. Chancen und Nutzen der Integrierten Produktpolitik (IPP) für die Wirtschaft, 200306.02.2003 mehr…
  • Lindemann, U.; Heßling, T.: Integrated Product Policy in Small and Middle-Sized Companies. Proceedings-Colloquium e-ecological Manufacturing, SFB 281, 200327.-28.03.2003, 129-134 mehr…
  • Lindemann, U.; Heßling, T.; Hutterer, P.: Introduction and Adaptation of Methods for Sustainable Product Development in Small and Middle-Sized Companies - Results and Experiences. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2003 mehr…
  • Mörtl, M.: "Design for Upgrading" of machines and production processes: A guideline based on actual demands of industry and sustainable design. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2003, 10 mehr…
  • Müller, F.; Pache, M.; Lindemann, U.: Digital Free Hand Sketching in 3D-A tool for early design phases. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2003 mehr…
  • Müller, F.; Pache, M.; Schneider, S.; Lindemann, U.: Free-Hand Sketching for creative work in early design phases. 1st International Conference on Advanced Research in Virtual and Rapid Prototyping, Escola Superior de Tecnologia e Gestão de Leiria, 200301.-04.10.2003 mehr…
  • Müller, F.; Schneider, S.; Diehl, H.; Pache, M.; Lindemann, U.: Optimierung des User-Interfaces beim VR-unterstützten 3D-Skizzieren. 2. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung, 2003 mehr…
  • Müller,J.; Zauner,C.: Low shock release unit - easy resettable and 100 % reusable. European Space Mechanisms and Tribology Symposium (ESMATS), 2003 mehr…
  • Pühlhofer,T.; Baier,H.: Approaches for further rationalisation in mechanical architecture and structural design of satellites. 54th International Astronautical Congress (IAC), 2003 mehr…
  • Pühlhofer,T.; Langer,H.; Baier,H.: Towards a Configuration Design Optimization Method. 5th World Congress on Structural and Multidisciplinary Optimization (ISSMO), 2003 mehr…
  • Shea, K.; Aish, R.; Gourtovaia, M.: Towards integrated performance-based generative design tools. eCAADe 03, 21st Conference on Education in Computer Aided Architectural Design in Europe, Graz University of Technology, 2003, 553-560 mehr…
  • Shea, K.; Starling, A.C.: From discrete structures to mechanical systems: A framework for creating performance-based parametric synthesis tools. AAAI'03 Spring Symposium 'Computational Synthesis', 2003, 210-217 mehr…
  • Tsouvalis, N.; Chauchot, P.; Livingstone, F.; Papazoglou, V.; Antonelli, V.; Williams, J.: Structural Design of Deep Water Composite Pressure Housings-Material Selection and Modeling Guidelines. IMDC, 2003 mehr…

2002

  • Antonelli, V.; Labordus, M.; Nederveen, P.: Composite End-Closures for an Authonomous Underwater Vehicle, Design and Manufacturing. SAMPE Europe, 2002 mehr…
  • Baier,H.; Datashvili,L.; Müller,M.: Concepts and technologies for precision unfurlable reflectors. 25th ESA Antenna Workshop on Satellite Antenna Technology, 2002 mehr…
  • Baier,H.; Datashvili,L.; Müller,M.: Towards high prescision unfurlables. European Conference on spacecraft structures materials and mechanical testing, 2002 mehr…
  • Baier,H.; Müller,M.: SMI - a structural dynamics toolbox for integrated modeling. TUM, 2002, mehr…
  • Fuchs, D.K.; Gramann, J.; Lindemann, U.: Generation of Product Concepts in collaborative Environment. Sixth Biennial World Conference on Integrated Design and Process Technology (IDPT-2002), Society for Design and Process Science (SDPS), 200223.-28.06.2002 mehr…
  • Fuchs, D.K.; Lindemann, U.; Jokele, B.; Anderl, R.; Kleiner, S.; Fadel, G.; Greenstein, J.: Sensitization to the Distributed Development Process. 4th Tools and Methods of Competitive Engineering, Huazhong University of Science and Technology Press, 200222.-26.04.2002, 601-612 mehr…
  • Hutterer, P.: IPP - Eine Chance für kleine und mittelständische Unternehmen? IFAT 2002, 200213.-17.05.2002 mehr…
  • Jarratt, T.; Eckert, C.; Schwankl, L.: Product Architecture and the Propagation of Engineering Change. 7th International Design Conference-DESIGN 2002, Sveucilisna tiskara, 200214.-17.05.2002, 75-80 mehr…
  • Langer,H.; Pühlhofer,T.; Baier,H.: An Approach for Shape and Topology Optimization Integrating CAD Parameterization and Evolutionary Algorithms. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, 2002 mehr…
  • Lindemann, U.: CAx - eine Kreativitätsbremse in der Produktentwicklung? Vision Automobil, Tagung Euroforum, 200210.04.2002 mehr…
  • Lindemann, U.: Methoden und Projekte der IPP für KMU. Chancen, Methoden und Nutzen der Integrierten Produktpolitik (IPP) für mein Unternehmen, IPPsilon-Seminar, 200217.10.2002 mehr…
  • Lindemann, U.: Flexible Adaption of Methods within the Design Process. 7th International Design Conference DESIGN 2002, Sveucilisna tiskara, 200214.-17.05.2002, 81-86 mehr…
  • Lindemann, U.: Produkte im Wettbewerb - Potenziale aus Konstruktion / Entwicklung. Chancen und Nutzen der Integrierten Produktpolitik (IPP) für die Wirtschaft, 200203.12.2002 mehr…
  • Lindemann, U.: Von der strategischen Produktplanung zum Produkt - ein Beispiel. VDMA-Tagung zum BMBF-Projekt Strategische Produktplanung, 200209.04.2002 mehr…
  • Lindemann, U.: Bidirektionale Integration von Berechnung und Gestaltung: Unschärfen in der Schnittstelle. Integration von Berechnung und Gestaltung, Tagung der DFG, 200214.-15.03.2002 mehr…
  • Lindemann, U.; Baumberger, Chr.; Fuchs, D.K.; Jokele, B.; Schumann, F.J: Evaluation Of Enterprise´s Innovation Activity. Design for X. Beiträge zum 13. Symposium, Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik, 200210.-11.10.2002, 131-138 mehr…
  • Lindemann, U.; Hutterer, P.; Heßling, T.; Mörtl, M.: Methods for environmental, sustainable development based on experience with companies. Recovery, Recycling, Re-integration, 6th World Congress on Integrated Resources Management, 200212.-15.02.2002 mehr…
  • Lindemann, U.; Mörtl, M.; Heßling, T.; Hutterer, P.: The guideline "Design for Upgrading" - A medium (incl. processes, methods, resources) to extend the usage phase. 9th CIRP International Seminar on Life Cycle Engineering 'IPP-chance and challenge', Meisenbach, 200209.-10.04.2002, 159-168 mehr…
  • Lindemann, U.; Mörtl, M.; Heßling, T; Hutterer, P.: The Guideline 'Design for Upgrading' as a Medium for Sustainable DESIGN. 7th International Design Conference DESIGN 2002, Sveucilisna tiskara, 2002, 1331-1338 mehr…
  • Lindemann, U.; Pulm, U.; Stetter, R.: Effective Strategies for Distributed Product Development. Sixth Biennial World Conference on Integrated Design and Process Technology (IDPT-2002), Society for Design and Process Science (SDPS), 200223.-28.06.2002 mehr…
  • Lindemann, U.; Wulf, J.: Produktentwicklung im Team als „politischer Prozess“. 47. internationales wissenschaftliches Kolloquium  , TU, 200223.-26.09.2002, 7 Seiten (CD-ROM) mehr…
  • Pronk, M.; Kuilen, G.-W.G van de; Antonelli, V.: An Advanced Non-Linear Material Model for Timber. WCTE, 2002 mehr…
  • Pulm, U.; Lindemann, U.: Towards a flexible and adequate Use of Methods in Product Development. 7th International Design Conference DESIGN 2002, Sveucilisna tiskara, 200214.-17.05.2002, 229-234 mehr…
  • Pühlhofer,T.; Gleichmar,R.; Langer,H.; Müller,M.; Müller,U.; Baier,H.: Multidisciplinary Optimization and Statistical Evaluations of Structures and Electro-Mechanical Components with ANSYS on a PC-Cluster. 20th CAD-FEM Users Meeting, 2002 mehr…

2001

  • Antonelli, V.: Feasibility Study on the Production of a Composite Helical Spring. TU Delft, Society of Manufacturing Engineers (Dearborn, MI) , 2001, mehr…
  • Baier,H.; Datashvili,L.: Building blocks of large deployable precision membrane reflectors. Proceedings of the 42nd AIAA/ASME Structures, Structural Dynamics and Materials Conference, 2001 mehr…
  • Baier,H.; Haberle,T.; Raffaelli,L.: Thermo-mechanics of cryogenic hybrid fiber composite materials and structures. Proceedings of the 3rd European Conference on Launcher Technology, 2001 mehr…
  • Baier,H.; Hagood IV,N.W.; Müller,U.: Feasibility study on conductive polymers as matrix materials in active fiber composites. DGLR-Jahrbuch 2001, DGLR-Jahrestagung, 2001 mehr…
  • Baier,H.; Langer,H.; Langer,H.; Pühlhofer,T.: A grain parallelized structural MDO engine which includes shape and topology variables. CEAS Conference on Multidisciplinary Aircraft Design and Optimization, 2001 mehr…
  • Baier,H.; Müller,M.: Entwurfsmethoden und Konzepte für höchstgenaue mechatronische Strukturen und Bauteile: Die SMI-Toolbox. Proceedings VDI-Konferenz Mechatronik, 2001 mehr…
  • Birkhofer, H.; Lindemann, U.; Albers, A.; Meier, M.: Product development as a structured and interactive network of knowledge-a revolutionary approach. 13th International Conference on Engineering Design ICED'01, I Mech E, 200121.-23.08.2001, 457-464 mehr…
  • Gerst, M.; Eckert, C.; Clarkson, J.; Lindemann, U.: Innovation in the tension of change and reuse. 13th International Conference on Engineering Design ICED'01, I Mech E, 200121.-23.08.2001, 371-378 mehr…
  • Gerst, M.; Gierhardt, H.; Braun, T.: User oriented definition of product requirements within mechatronic engineering. Human Friendly Mechatronics. Selected Papers of the Intern. Conf. on Machine Automation, ICMA 2000, Elsevier Science B.V., 200125.-27.09.2000, 365-370 mehr…
  • Lindemann, U.: Product innovation on demand - fiction or truth? 13th International Conference on Engineering Design ICED'01, I Mech E, 200121.-23.08.2001, 347-354 mehr…
  • Lindemann, U.; Heßling, T.; Hutterer, P.; Mörtl, M.: Applicable Methods for Sustainable Development for Small and Middle-Class Companies. 2nd Intern. Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2001), Printing House, 200111.-15.12.2001, 180-183 mehr…
  • Lindemann, U.; Hutterer, P.; Heßling, T.; Mörtl, M.: Nachhaltige Produktgestaltung in KMU anhand konkreter Praxisbeispiele. 2. Symposium Kreislaufwirtschaft von A-Z, 200117.11.2001, 5 Seiten mehr…
  • Lindemann, U.; Hutterer, P.; Heßling, T.; Mörtl, M.: IPP - eine Sicht aus der Wissenschaft. Integrierte Produktpolitik-Dokumentation IPPsilon-Kongress, BStMLU, 200110.12.2001, 2 Seiten mehr…
  • Lindemann, U.; Pulm, U.: Modellierung und Eigenschaftsabsicherung von Produktspektren für Mass Customization. Variantenvielfalt in Produkten und Prozessen, VDI, 200107.-08.11.2001, 325-339 mehr…
  • Lindemann, U.; Pulm, U.: Enhanced Product Structuring and Evaluation of Product Properties for Mass Customization. MCP’01, World Congress on Mass Customization and Personalization, 200101.-02.10.2001, 10 pages (CD-ROM) mehr…
  • Lindemann, U.; Wulf, J.: Action orientation in design methodology. 13th International Conference on Engineering Design ICED'01, I Mech E, 200121.-23.08.2001, 131-138 mehr…
  • Pache, M.; Römer, A.; Lindemann, U.; Hacker, W.: Sketching behaviour and creativity in conceptual engineering design. 13th International Conference on Engineering Design ICED'01, I Mech E, 200121.-23.08.2001, 461-468 mehr…
  • Pache, M.; Römer, A.; Lindemann, U.; Hacker, W.: Re-interpretation of Conceptual Design Sketches in Mechanical Engineering. DETC’01, ASME 2001 Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 200109.-12.09.2001, 7 pages (CD-ROM) mehr…
  • Pulm, U.; Lindemann, U.: Enhanced systematics for functional product structuring. 13th International Conference on Engineering Design ICED'01, I Mech E, 200121.-23.08.2001, 477-484 mehr…
  • Pulm, U.; Lindemann, U.: Mechanical Engineering as a Basis for Interdisciplinary Education. Workshop on Transdisciplinary Education, Research and Training, Society for Design and Process Science (SDPS), 200110.-13.06.2001, 44-51 mehr…
  • Schwankl, L.: Documentation and evaluation in early stages of the product development process. 13th International Conference on Engineering Design ICED'01, I Mech E, 200121.-23.08.2001, 235-242 mehr…
  • Schwankl, L.; Pichler, B.; Ziegler, S.; Bernecker, F.; Hanschke, M.: Interdisziplinäre Entwicklung komplexer mechatronischer Produkte - am Beispiel medizintechnischer Anwendungen. 4. VDI Mechatronik Tagung 2001 - Innovative Produktentwicklungen, VDI EKV, 200112.-13.09.2001 mehr…
  • Stetter, R.; Aßmann, G.; Viertlböck, M.: Functional product modelling-new methods for the generation of product functions. 13th International Conference on Engineering Design ICED'01, I Mech E, 200121.-23.08.2001, 493-500 mehr…

2000

  • Baier,H.: Potential and limits of using modal structural data for health monitoring. Proceedings of the International Conference on Aircraft Monitoring Systems, 2000, pp. 77-81 mehr…
  • Baier,H.; Datashvili,L.; Montuori,V.: Neue Konzepte und Technologien großer entfaltbarer Weltraumreflektoren. DGLR-Jahrbuch 2000 Band I und Band II, 2000IT 2000-113, DGLR-Jahrestagung mehr…
  • Baier,H.; Eckart,P.: Space and spacecraft related research and technology activities at the Aerospace Department of TU München. ESA conference on Academic and Industrial Cooperation in Space, 2000ESA-SP 470, pp. 111 - 118 mehr…
  • Baier,H.; Haberle,T.: High precision fibre composits and hybrid materials at cryogenic temperatures. Materials Week, 2000 mehr…
  • Crone, J; Dietrich, K.H.; Dorn, Th.; Mörtl, M.; Rath, S.: ProMeKreis-Konstruktionsleitfaden - Ein kompaktes Hilfsmittel für die recyclinggerechte Produktentwicklung. Recyclingorientierte Entwicklung technischer Produkte 2000-Management komplexer Zielkonflikte, VDI, 200015.-16.11.2000, 43-49 mehr…
  • Eckart,P.; Angelucci,S.; Appolloni,L.; Baier,H.; Canales,M.; da Silva-Curiel,A.; Freidl,E.; Igenbergs,E.; Kesselmann,M.; Neff,T.; Pauly,K.; Pühlhofer,T.; Schlerka,F.; Seefelder,W.; Tarabini,L.; Straub,A.; Ullmann,S.: Microspacecraft Platform with Bipropellant Propulsion System and 3-Axis Stabilization for Missions in Earth Orbit and Beyond LEO. 14th Annual AIAA / USU Conference on Small Satellites, 2000 mehr…
  • Ehrlenspiel, K.: The importance of the 'mental-and information-economy' for design and design-teaching. EDIPro'2000, 200012.-14.10.2000 mehr…
  • Ehrlenspiel, K.: Die Bedeutung der Denk- bzw. Informations-Ökonomie für die Konstruktionspraxis und die Lehre. Bayrische Konstruktionstagung 2000, 200010.-11.11.2000 mehr…
  • Ernzer, M.; Stetter, R.: Application of the Product Development Methodology in Industry. 5th Intern. Congress of Project Engineering, Universitat de Lleida, 200004.-06.10.2000, (CD-ROM) mehr…
  • Gerst, M.; Gierhardt, H.; Braun, T.: User oriented definition of product requirements within mechatronic engineering. Human Friendly Mechatronics. Proc. of the Intern. Conf. on Machine Automation, Elsevier Science B.V., 200025.-27.09.2000, 91-97 mehr…
  • Haberle,T.; Baier,H.: Messen von kleinen Verformungen an CFK-Proben bei Tieftemperatur. DGLR-Jahrestagung 2000, 2000 mehr…
  • Lindemann, U.; Anderl, R.; Fadel, G.; Greenstein, J.; Gierhardt, H.; Fuchs, D.K.; Gaul, H.D.; Ott, T.: 24h-Entwicklung - Ein Grundlagenprojekt in der Antriebsentwicklung. Entwicklung im Karosseriebau, VDI, 200011.-12.05.2000, 283-299 mehr…
  • Lindemann, U.; Anderl, R.; Gierhardt, H.; Fadel, G.: '24hr Design and Development' - An Engine Design Project. Collaborative Design. CoDesign 2000, Springer, 200011.-13.09.2000, 193-201 mehr…
  • Lindemann, U.; Bätzel, D.; Gerst, M.; Orlik, L.: Die Vordringliche Aktion Kooperatives Produktengineering. Auf dem Weg zu den Produkten für die Märkte von morgen. 4. Intern. Heinz-Nixdorf-Symposium, Heinz Nixdorf Institut, 200007.-08.12.2000, 61-74 mehr…
  • Lindemann, U.; Freyer, B.: Standardisierung bei Anpassungs- und Variantenkonstruktionen. Design for X. Beiträge zum 11. Symposium, Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik, 200012.-13.10.2000, 120-125 mehr…
  • Lindemann, U.; Mörtl, M.; Rath, S.: A Design Methodology for the Recycling of simple and complex Products. R'2000-Recovery, Recycling, Re-integration, 5th World Congress on Integrated Resources Management and Envirotech Trade Show, PEAK Ltd., 200005.-09.06.2000, (CD-ROM) mehr…
  • Lindemann, U.; Schlüter, A.; Schwankl, L.: Innovation - Zufall oder zielgerichtete Kreativität? Der kreative Konstrukteur-Freiräume schaffen für Produkt-und Prozessentwicklungen. 4. Deutscher Konstrukteurstag, VDI, 200006.-07.09.2000 mehr…
  • Locatelli,G.; Langer,H.; Müller,M.; Baier,H.: Simultaneous optimization of actuator placement and structural parameters by mathematical and genetic optimization algorithms. Proceedings of the IUTAM Conference Smart Structures and Structronic Systems, Kluwer ed., 2000 mehr…
  • Pache, M.; Lindemann, U.; Römer, A.; Hacker, W.: The use of sketches, physical models and CAD in early stages of the engineering design process. 5th World Conference on Integrated Design and Process Technology (IDPT 2000), Society for Design and Process Science (SDPS), 200004.-08.06.2000, 9 pages (CD-ROM) mehr…
  • Pichler, B.; Bernecker, G.; Böning, G.; Rafecas, M.; Pimpl, W.; Schwaiger, M.; Lorenz, E.; Ziegler, S.: A 32-Channel LSO Matrix Coupled to a Monolithic 4x8 APD Array for High Resolution PET. IEEE Nuclear Science Symposium & Medical Imaging Conference, IEEE Trans. Nucl. Sci., 2000 mehr…
  • Pühlhofer,T.; Baier,H.; Langer,H.: Vom Werkstoff zum Bauteil - die Prozesskette bei der Optimierung werkstoffhybrider Faserverbundbauteile. 18. Internationale FEM-Technologietage, 2000 mehr…
  • Schwankl, L.: Konzeptionelle Entwicklung innovativer Bremssysteme. Mechatronik-Mechanisch/Elektrische Antriebstechnik, VDI EKV, 200029.-30.03.2000, 109-126 mehr…
  • Schwankl, L.: Development Process of Innovative Brake Systems. Design Conference 2000. Proc. of the 6th Intern. Design Conference, 200023.-26.05.2000, 693-698 mehr…
  • Schwankl, L.; Pache, M.: Collaboration between University and Industry in Engineering Design. Adjunct Proc. of Collaborative Design. CoDesign 2000, Univ., 200011.-13.09.2000, 185-190 mehr…
  • Tsouvalis, N.; Zafeiratou, A.; Papazoglou, V.; Stevenson, P.; Antonelli, V.; Nederveen, P.J.: Transition Ring Design for an Autonomous Underwater Vehicle. IASS-IACM, 2000 mehr…
  • Wulf, J.; Schuller, J.: Entwicklungsmethodik für mechatronische Karosseriesysteme. Mechatronik-Mechanisch/Elektrische Antriebstechnik, VDI EKV, 200029.-30.03.2000, 181-198 mehr…

1999

  • Baier,H.; Gleichmar,R.; Langer,H.; Locatelli,G.: Eine Maschine für multidisziplinäre Strukturoptimierung. Proceedings of the Cadfem User Conference, 1999 mehr…
  • Baier,H.; Haberle,T.: Rechnerische und experimentelle Untersuchungen zur Auslegung werkstoffhybrider Faserverbundbauteile bei kryogenen Temperaturen. DGLR-Jahrbuch 1999, 1999DGLR-Jahrestagung mehr…
  • Baier,H.; Locatelli,G.: Optimization of actuator placement and structural parameters in smart structures. Proceedings of the SPIE Conference on Smart Structures and Materials, 1999 mehr…
  • Baier,H.; Locatelli,G.; Calabrese,M.: Analytical and experimental investigations on active and passive damping with PZT devices in lightweight structures. Dynamics and Control of Structures in Space IV, 1999 mehr…
  • Kaiser,C.; Baier,H.: Design of Smart Composite Laminates and Thin-Walled Beams. Proceedings of the ICCM-12, 199912th International Conference on Composite Materials mehr…

1998

  • Antonelli, V.; Van Tooren, M. J. L.: The effect of Reinforcements on the Stress Concentration around circular Cut-Outs in Cylindrical Shells for Aeronautical Scope. SAMPE Technical Conference, 1998 mehr…
  • Antonelli, V.; Van Tooren, M.J.L.: Feasiblity Study on the Replacements of Aircraft Window Frames with Composite Ones. International Conference on Advanced Composites, 1998 mehr…
  • Baier,H.: Active Vibration Control for Noise Reduction. Proceedings of the Euromechanics Colloquium "Adaptive Structures", Fortschrittberichte VDI, 1998, pp.1-10 mehr…
  • Baier,H.: Approximation techniques in Control-Structure-Interaction and Adaptive Structure. ISSMO International Conference, 1998 mehr…
  • Baier,H.; Haberle,T.: Cryogenic Composite Structures. Proceedings of the ESA Conference on Spacecraft Structures and Mechanical Testing, 1998 mehr…
  • Baier,H.; Kaiser,C.; Locatelli,G.: Aeroelastic Tailoring of Anisotropic Structures for Passive and Active Displacement Control. Proceedings of the Aeroelastics Conference, 1998DGLR mehr…
  • Kaiser,C.; Paracchini,P.V.; Fransescatti,D.: Analysis of Composite Thin-Walled Multi-Celled Beams with Elastic Couplings. ECCM-8, European Conference on Composite Materials, 1998, pp. 173-180 mehr…

1997

  • Baier,H.: Approaches and technologies for optimal control-structure-interaction in smart structures. C.L. Kirk, D.J. Inman (eds): Dynamics and Control of Structures in Space, Computational Mechanics Publications, 1997 mehr…
  • Baier,H.; et.al.,: Potential nachwachsender Rohstoffe im Leichtbau. Seminar für Leichtbau an der Technischen Universität München, 1997 mehr…
  • Faust,M.; Baier,H.: A State Space Formulation For Coupled Structure-Acoustic Vibrations. Proceedings of the International Conference on Active Noise Control, 1997 mehr…
  • Gleichmar,R.: Bewertung eines neuen Festigkeitskriteriums für Faserverbundlaminate und Integration in ein FE-Programm (TUM-MW 64/9702-TB). Technischer Bericht, Lehrstuhl für Leichtbau, TU München, 1997, mehr…
  • Gleichmar,R.; Kaiser,C.; Rother,K.: Implementation des wirkebenebezogenen Zwischenfaserbruchkriteriums nach Puck in das Finite-Element-Programm ANSYS. Friedrich, K.: Verbundwerkstoffe und Werkstoffverbunde, 1997DGM-Tagung, S. 759-764 mehr…
  • Kaiser,C.; Gleichmar,R.: Dimensionieren von Faserverbundstrukturen mit neuen Bruchkriterien in ANSYS (Vortrag Nr. 2-15). Tagungsband 15. CAD-FEM USERS MEETING, 1997 mehr…
  • Kaiser,C.; Gleichmar,R.: Bewertung des wirkebenebezogenen Zwischenfaserbruchkriteriums nach Puck mit Hilfe der FE-Methode. DGLR-Jahrbuch 1997, 1997DGLR-Jahrestagung, S. 1739-1745 mehr…
  • Last,B.; Baier,H.; Schmidt,Herold.: Hysterese models and linearization in controlled structures. Proceedings of the International Conference on Smart Materials and Structures, 1997 mehr…
  • Schwab,K.; Baier,H.; Schäfer,W.; Stolten,D.: Thermomechanical Analysis of the Joining Process of a Planar Ceramic High-Temperature Fuel Cell System. 5th International Conference Joining Ceramics, Glass and Metal, 1997 mehr…
  • van den Dool,T.; Doelman,N.; Häusler,S.; Baier,H.: Broadband MIMO ANC in an Ariane Fairing Model. Proceedings of the International Conference on Active Noise Control, 1997 mehr…

1996

  • Haberle,T.; Mendler,J.: Rechnerische und experimentelle Strukturanalyse eines Sandwichgehäuses für ein Weltraumexperiment. Berechnung von Faserverbundstrukturen unter Anwendung numerischer Verfahren, 1996München, Lehrstuhl für Leichtbau, S. 11-1 - 11-9 mehr…
  • Kaiser,C.; Francescatti,D.: Theoretical and experimental analysis of composite beams with elastic couplings (ICAS-96-5.4.4). Proceedings of the 20th Congress of the International Council of the Aeronautical Sciences (ICAS), 1996, Seite 968-978 mehr…
  • Katzenschwanz,C.: Stresses and Displacements in Repaired Plates Made out of Composite Materials. Advances in Analysis and Design of Composites, Civil-Comp Press, 1996, S. 91-100 mehr…
  • Katzenschwanz,C.: Spannungen und Verschiebungen in reparierten Scheiben und Platten aus faserverstärktem Kunststoff. DGLR-Jahrbuch 1996, 1996DGLR Jahrestagung mehr…
  • Katzenschwanz,C.; Senger,W.: Anwendungsbeispiele der FEM mit ANSYS in der Berechnung von Faserverbundwerkstoffen. Berechnung von Faserverbundstrukturen unter Anwendung numerischer Verfahren, 1996München, Lehrstuhl für Leichtbau, (S. 10-1 - 10-9) mehr…
  • Knott,H.-P.; Kaiser,C.: Auslegung von Strukturen zur Integration von Experimenten in Flugzeugzellen (Vortrag Nr. I-6). Tagungsband 14. CAD-FEM USERS MEETING, 1996 mehr…